Aceticacid, hydroxy- (9CI) Glycolic acid (7CI,8CI) 2-Hydroxyacetic acid
According to the UN GHS revision 10
Version: 1.0
Creation Date: July 15, 2019
Revision Date: July 15, 2019
Product name |
Glycollic acid |
---|
Product number |
- |
---|---|
Other names |
Glycocide; Acetic acid, hydroxy-; CHC-22 |
Identified uses |
Industrial and scientific research use. |
---|---|
Uses advised against |
no data available |
Skin corrosion, Sub-category 1B
Serious eye damage, Category 1
Acute toxicity - Category 4, Inhalation
Pictogram(s) | |
---|---|
Signal word |
Danger |
Hazard statement(s) |
H314 Causes severe skin burns and eye damage H318 Causes serious eye damage H332 Harmful if inhaled |
Precautionary statement(s) | |
Prevention |
P260 Do not breathe dust/fume/gas/mist/vapours/spray. P264 Wash ... thoroughly after handling. P280 Wear protective gloves/protective clothing/eye protection/face protection/hearing protection/... P261 Avoid breathing dust/fume/gas/mist/vapours/spray. P271 Use only outdoors or in a well-ventilated area. |
Response |
P301+P330+P331 IF SWALLOWED: Rinse mouth. Do NOT induce vomiting. P363 Wash contaminated clothing before reuse. P304+P340 IF INHALED: Remove person to fresh air and keep comfortable for breathing. P316 Get emergency medical help immediately. P321 Specific treatment (see ... on this label). P305+P351+P338 IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. P305+P354+P338 IF IN EYES: Immediately rinse with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. P317 Get medical help. |
Storage |
P405 Store locked up. |
Disposal |
P501 Dispose of contents/container to an appropriate treatment and disposal facility in accordance with applicable laws and regulations, and product characteristics at time of disposal. |
no data available
Chemical name | Common names and synonyms | CAS number | EC number | Concentration |
---|---|---|---|---|
Glycollic acid | Glycollic acid | 79-14-1 | 201-180-5 | 100% |
If inhaled
Half-upright position. Fresh air, rest. Refer for medical attention.
Following skin contact
First rinse with plenty of water for at least 15 minutes, then remove contaminated clothes and rinse again.
Following eye contact
First rinse with plenty of water for several minutes (remove contact lenses if easily possible), then refer for medical attention.
Following ingestion
Do NOT induce vomiting. Give one or two glasses of water to drink. Refer for medical attention .
no data available
Immediate first aid: Ensure that adequate decontamination has been carried out. If patient is not breathing, start artificial respiration, preferably with a demand-valve resuscitator, bag-valve-mask device, or pocket mask, as trained. Perform CPR as necessary. Immediately flush contaminated eyes with gently flowing water. Do not induce vomiting. If vomiting occurs, lean patient forward or place on left side (head-down position, if possible) to maintain an open airway and prevent aspiration. Keep patient quiet and maintain normal body temperature. Obtain medical attention. Organic acids and related compounds
Suitable extinguishing media: Use water spray, alcohol - resistant foam, dry chemical or carbon dioxide.
Combustible.
Use water spray, powder, foam, carbon dioxide.
Personal protection: chemical protection suit including self-contained breathing apparatus. Sweep spilled substance into covered containers.
Personal protection: chemical protection suit including self-contained breathing apparatus. Sweep spilled substance into covered containers.
Accidental Release Measures. Personal precautions, protective equipment and emergency procedures: Use personal protective equipment. Avoid dust formation. Avoid breathing vapors, mist or gas. Ensure adequate ventilation. Evacuate personnel to safe areas. Avoid breathing dust. Environmental precautions: Do not let product enter drains. Methods and materials for containment and clean up: Pick up and arrange disposal without creating dust. Sweep up and shovel. Keep in suitable, closed containers for disposal.
NO open flames. Handling in a well ventilated place. Wear suitable protective clothing. Avoid contact with skin and eyes. Avoid formation of dust and aerosols. Use non-sparking tools. Prevent fire caused by electrostatic discharge steam.
Separated from strong oxidants, metals, sulfides, cyanides, strong bases and food and feedstuffs. Dry.Separated from strong oxidants, metals, sulfides, cyanides, strong bases and food and feedstuffs. Dry.
Occupational Exposure limit values
no data available
Biological limit values
no data available
Ensure adequate ventilation. Handle in accordance with good industrial hygiene and safety practice. Set up emergency exits and the risk-elimination area.
Eye/face protection
Wear safety goggles or eye protection in combination with breathing protection.
Skin protection
Protective gloves.
Respiratory protection
Avoid inhalation of dust and mist.
Thermal hazards
no data available
Physical state |
Solid. Crystalline. |
---|---|
Colour |
Colourless. |
Odour |
Odorless |
Melting point/freezing point |
78 - 80.5 °C. |
Boiling point or initial boiling point and boiling range |
169 °C. Atm. press.:998 hPa. |
Flammability |
Combustible. |
Lower and upper explosion limit/flammability limit |
no data available |
Flash point |
> 100 °C. |
Auto-ignition temperature |
no data available |
Decomposition temperature |
100°C |
pH |
pH = 2.5 (0.5%); 2.33 (1.0%); 2.16 (2.0%); 1.91 (5.0%); 1.73 (10.0%) |
Kinematic viscosity |
kinematic viscosity (in mm²/s) = 6.149. Temperature:23.0°C. Remarks:Mean of two runs. |
Solubility |
In water, 1X10+6 mg/L at 25 deg C (est) |
Partition coefficient n-octanol/water |
log Pow = < 0.3. Temperature:25 °C.;log Pow = < 0.3. Temperature:25 °C.;log Pow = < 0.3. Temperature:25 °C. |
Vapour pressure |
0.41 Pa. Temperature:25 °C. Remarks:Mean value from four runs. |
Density and/or relative density |
1.26 g/cm³. Temperature:20 °C. |
Relative vapour density |
(air = 1): 2.6 |
Particle characteristics |
no data available |
Reacts with strong oxidants, cyanides and sulfides. Reacts violently with aluminium, zinc and tin. This generates fire and explosion hazard. The solution in water is a medium strong acid.
Stable under recommended storage conditions.
Combustible.
no data available
Materials to avoid Bases, Oxidizing agents, Reducing agents
Hazardous decomposition products formed under fire conditions. - Carbon oxides
Acute toxicity
Skin corrosion/irritation
no data available
Serious eye damage/irritation
no data available
Respiratory or skin sensitization
no data available
Germ cell mutagenicity
no data available
Carcinogenicity
no data available
Reproductive toxicity
no data available
STOT-single exposure
The substance is corrosive to the skin and eyes. The substance is irritating to the respiratory tract. Corrosive on ingestion. This may result in kidney failure.
STOT-repeated exposure
Repeated or prolonged contact with skin may cause dermatitis.
Aspiration hazard
A harmful concentration of airborne particles can be reached quickly on spraying or when dispersed, especially if powdered.
AEROBIC: Hydroxyacetic acid achieved 32% theoretical oxidation by acclimated activated sludge after 12 hours of aeration(1). The theoretical BOD for hydroxyacetic acid was reported to be 0.89 after 5 days using acclimated mixed microbial cultures(2). Hydroxyacetic acid, present at 100 mg/L, reached 86% of its theoretical BOD in 2 weeks using an activated sludge inoculum at 30 mg/L in the Japanese MITI test(3). Therefore this compound is expected to biodegrade rapidly in the environment(SRC).
An estimated BCF of 3 was calculated in fish for hydroxyacetic acid (SRC), using a measured log Kow of -1.11(1) and a regression-derived equation(2). According to a classification scheme(3), this BCF suggests the potential for bioconcentration in aquatic organisms is low(SRC).
The Koc of hydroxyacetic acid is estimated as 0.14(SRC), using a measured log Kow of -1.11(1) and a regression-derived equation(2). According to a classification scheme(3), this estimated Koc value suggests that hydroxyacetic acid is expected to have very high mobility in soil. The pKa of hydroxyacetic acid is 3.6(4), indicating that this compound will exist almost entirely in the anion form and anions generally do not adsorb more strongly to soils containing organic carbon and clay than their neutral counterparts(5).
no data available
Product
The material can be disposed of by removal to a licensed chemical destruction plant or by controlled incineration with flue gas scrubbing. Do not contaminate water, foodstuffs, feed or seed by storage or disposal. Do not discharge to sewer systems.
Contaminated packaging
Containers can be triply rinsed (or equivalent) and offered for recycling or reconditioning. Alternatively, the packaging can be punctured to make it unusable for other purposes and then be disposed of in a sanitary landfill. Controlled incineration with flue gas scrubbing is possible for combustible packaging materials.
ADR/RID: UN3261 (For reference only, please check.) | IMDG: UN3261 (For reference only, please check.) | IATA: UN3261 (For reference only, please check.) |
ADR/RID: CORROSIVE SOLID, ACIDIC, ORGANIC, N.O.S. (For reference only, please check.) | IMDG: CORROSIVE SOLID, ACIDIC, ORGANIC, N.O.S. (For reference only, please check.) | IATA: CORROSIVE SOLID, ACIDIC, ORGANIC, N.O.S. (For reference only, please check.) |
ADR/RID: 8 (For reference only, please check.) | IMDG: 8 (For reference only, please check.) | IATA: 8 (For reference only, please check.) |
ADR/RID: I (For reference only, please check.) | IMDG: I (For reference only, please check.) | IATA: I (For reference only, please check.) |
ADR/RID: No | IMDG: No | IATA: No |
no data available
no data available
Chemical name | Common names and synonyms | CAS number | EC number |
---|---|---|---|
Glycollic acid | Glycollic acid | 79-14-1 | 201-180-5 |
European Inventory of Existing Commercial Chemical Substances (EINECS) | Listed. | ||
EC Inventory | Listed. | ||
United States Toxic Substances Control Act (TSCA) Inventory | Listed. | ||
China Catalog of Hazardous chemicals 2015 | Not Listed. | ||
New Zealand Inventory of Chemicals (NZIoC) | Listed. | ||
Philippines Inventory of Chemicals and Chemical Substances (PICCS) | Listed. | ||
Vietnam National Chemical Inventory | Listed. | ||
Chinese Chemical Inventory of Existing Chemical Substances (China IECSC) | Listed. | ||
Korea Existing Chemicals List (KECL) | Listed. |
Information on revision
Creation Date | July 15, 2019 |
---|---|
Revision Date | July 15, 2019 |
Abbreviations and acronyms
Package&Shipping
Qingdao Bravery International Trading Co., LTD. is located in the beautiful tourist city of Qingdao, is a comprehensive chemical enterprise which doing import and export business. Product range including, API, pharmacy intermediates,food additive,Surfactant ,fungicides and other general chemicals. etc.
With the developing world market, we adhere to the principle of "quality, service, integrity and development" ,Forge ahead,and constantly in pursuit of higher level of product quality and service.
We warmly welcome customers home and abroad to build mutual trust, mutual benefit and stable cooperation relation.
General items: import and export of goods; Technology import and export; Food additive sales; Feed additive sales; Sales of special chemical products (without hazardous chemicals); Sales of chemical products (excluding licensed chemical products); Livestock and fishery feed sales; Feed raw material sales; Fertilizer sales; Sales of bio-based materials; Health food (pre-packaged) sales; Food sales (pre-packaged food only); Sales of agricultural and sideline products; Pharmaceutical excipients sales; Drug wholesale
We could give you:
1.Best quality in your requirement
2.Competitive price in China market with standard high quality or customize
3.mature Technical support,Well-trained and professional technologist and sales with rich experience in the field for 5-10 years
4.Professional logistic support,Free sample and correct shipping documents dispatched according to regulations of different countries
All we want is win-win business. Send your inquiries, you will get it!
Why choose us:
1.Factory direct sales, so we can provide the competitive price and high quality product base on 5 years of production and R&D experience
2.It is available in stock for quick shipment. Products could be packaged according to customer’s specialized requirements.
3.The products can be transported by Courier, air or sea.
4.Customers will receive the most professional technical support and efficient service.
5.Any inquiries will be replied within 24hours.
6.High purity with test report.
CAS NO:110-27-0
CAS NO:27280-85-9
CAS NO:27280-85-9
CAS NO:91031-88-8
CAS NO:91031-88-8
CAS NO:614-33-5
About|Contact|Cas|Product Name|Molecular|Country|Encyclopedia
Message|New Cas|MSDS|Service|Advertisement|CAS DataBase|Article Data|Manufacturers | Chemical Catalog
©2008 LookChem.com,License: ICP
NO.:Zhejiang16009103
complaints:service@lookchem.com Desktop View