Divalproex Valericacid, 2-propyl- (6CI,7CI,8CI) 2-Propylvaleric acid
According to the UN GHS revision 10
Version: 1.0
Creation Date: July 15, 2019
Revision Date: July 15, 2019
Product name |
2-propylvaleric acid |
---|
Product number |
- |
---|---|
Other names |
Mylproin; Ergenyl; 2-Propylpentanoic acid |
Identified uses |
Industrial and scientific research use. |
---|---|
Uses advised against |
no data available |
Acute toxicity - Category 4, Oral
Skin irritation, Category 2
Serious eye damage, Category 1
Reproductive toxicity, Category 1A
Pictogram(s) | |
---|---|
Signal word |
Danger |
Hazard statement(s) |
H302 Harmful if swallowed H315 Causes skin irritation H318 Causes serious eye damage H360 May damage fertility or the unborn child |
Precautionary statement(s) | |
Prevention |
P264 Wash ... thoroughly after handling. P270 Do not eat, drink or smoke when using this product. P280 Wear protective gloves/protective clothing/eye protection/face protection/hearing protection/... P203 Obtain, read and follow all safety instructions before use. |
Response |
P301+P317 IF SWALLOWED: Get medical help. P330 Rinse mouth. P302+P352 IF ON SKIN: Wash with plenty of water/... P321 Specific treatment (see ... on this label). P332+P317 If skin irritation occurs: Get medical help. P362+P364 Take off contaminated clothing and wash it before reuse. P305+P354+P338 IF IN EYES: Immediately rinse with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. P317 Get medical help. P318 IF exposed or concerned, get medical advice. |
Storage |
P405 Store locked up. |
Disposal |
P501 Dispose of contents/container to an appropriate treatment and disposal facility in accordance with applicable laws and regulations, and product characteristics at time of disposal. |
no data available
Chemical name | Common names and synonyms | CAS number | EC number | Concentration |
---|---|---|---|---|
2-propylvaleric acid | 2-propylvaleric acid | 99-66-1 | 202-777-3 | 100% |
If inhaled
Move the victim into fresh air. If breathing is difficult, give oxygen. If not breathing, give artificial respiration and consult a doctor immediately. Do not use mouth to mouth resuscitation if the victim ingested or inhaled the chemical.
Following skin contact
Take off contaminated clothing immediately. Wash off with soap and plenty of water. Consult a doctor.
Following eye contact
Rinse with pure water for at least 15 minutes. Consult a doctor.
Following ingestion
Rinse mouth with water. Do not induce vomiting. Never give anything by mouth to an unconscious person. Call a doctor or Poison Control Center immediately.
SYMPTOMS: Symptoms of exposure to this compound may include gastrointestinal disturbances, hair loss, psychosis, altered bleeding time, altered liver enzymes and fatal hepatic failure. Other symptoms may include central nervous system depression, nausea, vomiting, indigestion, diarrhea, abdominal cramps, constipation, anorexia with weight loss, increased appetite with weight gain, tremor, ataxia, headache, nystagmus, diplopia, asterixis, spots before the eyes, dysarthria, dizziness, incoordination, coma, skin rash, erythema multiforme, generalized pruritus, emotional upset, depression, hyperactivity, behavioral deterioration, weakness, thrombocytopenia, petechiae, bruising, hematoma formation, frank hemorrhage, relative lymphocytosis, hypofibrinogenemia, leukopenia, eosinophilia, anemia, bone marrow suppression, irregular menses, secondary amenorrhea and breast enlargement. Changes in exocrine pancreas and sleep disturbances may also occur. It may also cause somnolence. ACUTE/CHRONIC HAZARDS: When heated to decomposition this compound may emit toxic fumes of carbon monoxide and carbon dioxide. (NTP, 1992)
Administration of high-dose naloxone has been reported to reverse valproate-induced CNS depression. Theories regarding the reversal of sedation by naloxone include reversal of the release of endogenous opioids and reversal of valproate blockade of GABA uptake by cells. Serum glucose, calcium, phosphate, and platelets must be frequently measured and treated accordingly.
Fires involving this material can be controlled with a dry chemical, carbon dioxide or Halon extinguisher. (NTP, 1992)
This chemical is combustible. (NTP, 1992)
Wear self-contained breathing apparatus for firefighting if necessary.
Avoid dust formation. Avoid breathing mist, gas or vapours.Avoid contacting with skin and eye. Use personal protective equipment.Wear chemical impermeable gloves. Ensure adequate ventilation.Remove all sources of ignition. Evacuate personnel to safe areas.Keep people away from and upwind of spill/leak.
Prevent further spillage or leakage if it is safe to do so. Do not let the chemical enter drains. Discharge into the environment must be avoided.
Collect and arrange disposal. Keep the chemical in suitable and closed containers for disposal. Remove all sources of ignition. Use spark-proof tools and explosion-proof equipment. Adhered or collected material should be promptly disposed of, in accordance with appropriate laws and regulations.
Handling in a well ventilated place. Wear suitable protective clothing. Avoid contact with skin and eyes. Avoid formation of dust and aerosols. Use non-sparking tools. Prevent fire caused by electrostatic discharge steam.
Store between 15 and 30 deg C (59 and 86 deg F), in a tight container. Valproic Acid Capsules USP
Occupational Exposure limit values
no data available
Biological limit values
no data available
Ensure adequate ventilation. Handle in accordance with good industrial hygiene and safety practice. Set up emergency exits and the risk-elimination area.
Eye/face protection
Wear tightly fitting safety goggles with side-shields conforming to EN 166(EU) or NIOSH (US).
Skin protection
Wear fire/flame resistant and impervious clothing. Handle with gloves. Gloves must be inspected prior to use. Wash and dry hands. The selected protective gloves have to satisfy the specifications of EU Directive 89/686/EEC and the standard EN 374 derived from it.
Respiratory protection
If the exposure limits are exceeded, irritation or other symptoms are experienced, use a full-face respirator.
Thermal hazards
no data available
Physical state |
Liquid. Viscous. |
---|---|
Colour |
Colourless to pale yellow. |
Odour |
Characteristic odor |
Melting point/freezing point |
223°C(dec.)(lit.) |
Boiling point or initial boiling point and boiling range |
Ca. 222 °C. Atm. press.:Ca. 760 mm Hg. Remarks:No data regarding decomposition. |
Flammability |
no data available |
Lower and upper explosion limit/flammability limit |
no data available |
Flash point |
111°C |
Auto-ignition temperature |
no data available |
Decomposition temperature |
no data available |
pH |
no data available |
Kinematic viscosity |
no data available |
Solubility |
less than 1 mg/mL at 72° F (NTP, 1992) |
Partition coefficient n-octanol/water |
no data available |
Vapour pressure |
8.47X10-2 mm Hg at 25 deg C (est) |
Density and/or relative density |
0.9g/mLat 25°C(lit.) |
Relative vapour density |
no data available |
Particle characteristics |
no data available |
no data available
no data available
VALPROIC ACID is a carboxylic acid. Carboxylic acids donate hydrogen ions if a base is present to accept them. They react in this way with all bases, both organic (for example, the amines) and inorganic. Their reactions with bases, called "neutralizations", are accompanied by the evolution of substantial amounts of heat. Neutralization between an acid and a base produces water plus a salt. Carboxylic acids with six or fewer carbon atoms are freely or moderately soluble in water; those with more than six carbons are slightly soluble in water. Soluble carboxylic acid dissociate to an extent in water to yield hydrogen ions. The pH of solutions of carboxylic acids is therefore less than 7.0. Many insoluble carboxylic acids react rapidly with aqueous solutions containing a chemical base and dissolve as the neutralization generates a soluble salt. Carboxylic acids in aqueous solution and liquid or molten carboxylic acids can react with active metals to form gaseous hydrogen and a metal salt. Such reactions occur in principle for solid carboxylic acids as well, but are slow if the solid acid remains dry. Even "insoluble" carboxylic acids may absorb enough water from the air and dissolve sufficiently in it to corrode or dissolve iron, steel, and aluminum parts and containers. Carboxylic acids, like other acids, react with cyanide salts to generate gaseous hydrogen cyanide. The reaction is slower for dry, solid carboxylic acids. Insoluble carboxylic acids react with solutions of cyanides to cause the release of gaseous hydrogen cyanide. Flammable and/or toxic gases and heat are generated by the reaction of carboxylic acids with diazo compounds, dithiocarbamates, isocyanates, mercaptans, nitrides, and sulfides. Carboxylic acids, especially in aqueous solution, also react with sulfites, nitrites, thiosulfates (to give H2S and SO3), dithionites (SO2), to generate flammable and/or toxic gases and heat. Their reaction with carbonates and bicarbonates generates a harmless gas (carbon dioxide) but still heat. Like other organic compounds, carboxylic acids can be oxidized by strong oxidizing agents and reduced by strong reducing agents. These reactions generate heat. A wide variety of products is possible. Like other acids, carboxylic acids may initiate polymerization reactions; like other acids, they often catalyze (increase the rate of) chemical reactions. This chemical is incompatible with bases, oxidizing agents and reducing agents. It is corrosive. (NTP, 1992).
no data available
no data available
When heated to decomposition it emits acrid smoke and irritating fumes.
Acute toxicity
Skin corrosion/irritation
no data available
Serious eye damage/irritation
no data available
Respiratory or skin sensitization
no data available
Germ cell mutagenicity
no data available
Carcinogenicity
no data available
Reproductive toxicity
no data available
STOT-single exposure
no data available
STOT-repeated exposure
no data available
Aspiration hazard
no data available
no data available
An estimated BCF of 3 was calculated in fish for valproic acid(SRC), using a log Kow of 2.75(1) and a regression-derived equation(2). According to a classification scheme(3), this BCF suggests the potential for bioconcentration in aquatic organisms is low(SRC).
The Koc of valproic acid is estimated as 47(SRC), using a log Kow of 2.75(1) and a regression-derived equation(2). According to a classification scheme(3), this estimated Koc value suggests that valproic acid is expected to have very high mobility in soil. The pKa of valproic acid is 4.6(4), indicating that this compound will exist almost entirely in the anion form in the environment and anions generally do not adsorb more strongly to soils containing organic carbon and clay than their neutral counterparts(5).
no data available
Product
The material can be disposed of by removal to a licensed chemical destruction plant or by controlled incineration with flue gas scrubbing. Do not contaminate water, foodstuffs, feed or seed by storage or disposal. Do not discharge to sewer systems.
Contaminated packaging
Containers can be triply rinsed (or equivalent) and offered for recycling or reconditioning. Alternatively, the packaging can be punctured to make it unusable for other purposes and then be disposed of in a sanitary landfill. Controlled incineration with flue gas scrubbing is possible for combustible packaging materials.
ADR/RID: Not dangerous goods. (For reference only, please check.) | IMDG: Not dangerous goods. (For reference only, please check.) | IATA: Not dangerous goods. (For reference only, please check.) |
ADR/RID: Not dangerous goods. (For reference only, please check.) | IMDG: Not dangerous goods. (For reference only, please check.) | IATA: Not dangerous goods. (For reference only, please check.) |
ADR/RID: Not dangerous goods. (For reference only, please check.) | IMDG: Not dangerous goods. (For reference only, please check.) | IATA: Not dangerous goods. (For reference only, please check.) |
ADR/RID: Not dangerous goods. (For reference only, please check.) | IMDG: Not dangerous goods. (For reference only, please check.) | IATA: Not dangerous goods. (For reference only, please check.) |
ADR/RID: No | IMDG: No | IATA: No |
no data available
no data available
Chemical name | Common names and synonyms | CAS number | EC number |
---|---|---|---|
2-propylvaleric acid | 2-propylvaleric acid | 99-66-1 | 202-777-3 |
European Inventory of Existing Commercial Chemical Substances (EINECS) | Listed. | ||
EC Inventory | Listed. | ||
United States Toxic Substances Control Act (TSCA) Inventory | Not Listed. | ||
China Catalog of Hazardous chemicals 2015 | Not Listed. | ||
New Zealand Inventory of Chemicals (NZIoC) | Listed. | ||
Philippines Inventory of Chemicals and Chemical Substances (PICCS) | Listed. | ||
Vietnam National Chemical Inventory | Listed. | ||
Chinese Chemical Inventory of Existing Chemical Substances (China IECSC) | Not Listed. | ||
Korea Existing Chemicals List (KECL) | Listed. |
Information on revision
Creation Date | July 15, 2019 |
---|---|
Revision Date | July 15, 2019 |
Package&Shipping
Qingdao Bravery International Trading Co., LTD. is located in the beautiful tourist city of Qingdao, is a comprehensive chemical enterprise which doing import and export business. Product range including, API, pharmacy intermediates,food additive,Surfactant ,fungicides and other general chemicals. etc.
With the developing world market, we adhere to the principle of "quality, service, integrity and development" ,Forge ahead,and constantly in pursuit of higher level of product quality and service.
We warmly welcome customers home and abroad to build mutual trust, mutual benefit and stable cooperation relation.
General items: import and export of goods; Technology import and export; Food additive sales; Feed additive sales; Sales of special chemical products (without hazardous chemicals); Sales of chemical products (excluding licensed chemical products); Livestock and fishery feed sales; Feed raw material sales; Fertilizer sales; Sales of bio-based materials; Health food (pre-packaged) sales; Food sales (pre-packaged food only); Sales of agricultural and sideline products; Pharmaceutical excipients sales; Drug wholesale
We could give you:
1.Best quality in your requirement
2.Competitive price in China market with standard high quality or customize
3.mature Technical support,Well-trained and professional technologist and sales with rich experience in the field for 5-10 years
4.Professional logistic support,Free sample and correct shipping documents dispatched according to regulations of different countries
All we want is win-win business. Send your inquiries, you will get it!
Why choose us:
1.Factory direct sales, so we can provide the competitive price and high quality product base on 5 years of production and R&D experience
2.It is available in stock for quick shipment. Products could be packaged according to customer’s specialized requirements.
3.The products can be transported by Courier, air or sea.
4.Customers will receive the most professional technical support and efficient service.
5.Any inquiries will be replied within 24hours.
6.High purity with test report.
CAS NO:762240-92-6
CAS NO:762240-92-6
CAS NO:40187-51-7
CAS NO:40187-51-7
CAS NO:2700-30-3
CAS NO:2700-30-3
About|Contact|Cas|Product Name|Molecular|Country|Encyclopedia
Message|New Cas|MSDS|Service|Advertisement|CAS DataBase|Article Data|Manufacturers | Chemical Catalog
©2008 LookChem.com,License: ICP
NO.:Zhejiang16009103
complaints:service@lookchem.com Desktop View