Details:

Product Description:

Introduction

Molar Mass	342.3
Density	1.5805
Melting Point	185-187 °C (lit.)
Boling Point	397.76°C (rough estimate)
Specific Rotation(α)	67 º (c=26, in water 25 ºC)
Flash Point	93.3°C
Water Solubility	1970 g/L (15 ºC)
Solubility	1g soluble in 0.5ml of water, 170ml of ethanol, about 100ml of methanol, slightly soluble in glycerol and pyridine
Vapor Presure	1.79E-22mmHg at 25°C
Appearance	White crystal
Color	White
Odor	Odorless
Exposure Limit	ACGIH: TWA 10 mg/m3OSHA: TWA 15 mg/m3; TWA 5 mg/m3NIOSH: TWA 10 mg/m3; TWA 5 mg/m3
Maximum wavelength(λmax)	['λ: 260 nm Amax: 0.11', , 'λ: 280 nm Amax: 0.08']
Merck	14,8881
BRN	90825
pKa	12.7(at 25℃)
PH	5.0-7.0 (25℃, 1M in H2O)
Storage Condition	Inert atmosphere,Room Temperature
Stability	Stable. Combustible. Incompatible with strong oxidizing agents. Hydrolyzed by dilute acids and by invertase.
Sensitive	Easily absorbing moisture
Refractive Index	66.5 ° (C=26, H2O)
MDL	MFCD00006626
Physical and Chemical Properties	White crystalline odorless solid with sweet taste. Relative density (D225) 1.587, melting point 170~186 deg C (decomposition). Soluble in water, insoluble in ether.
Use	Used as a standard for the analysis of organic elements

Exam

Authoritative Data Verified Data

color of solution

take 5g of this product and add 5ml of water to dissolve it. If the color is colored, it shall not be deeper compared with the yellow No. 4 standard colorimetric solution (General rule 0901 first method).

sulfate

take l.Og of this product and check it according to law (General rule 0802). Compared with the control solution made of 0.05% of standard potassium sulfate solution, it should not be more concentrated ().

reducing sugar

Take 5.0g of this product, put it in a 250ml Erlenmeyer flask, add 25ml of water to dissolve it, add 25ml of basic copper citrate test solution and several grains of glass beads precisely, heat and reflux to make boiling within 3 minutes, from the time of complete boiling, continue boiling for 5 minutes, quickly cool to room temperature (at this time should be careful not to make cuprous oxide in the bottle contact with air), immediately add 25% potassium iodide solution 15ml, shake, with shaking with the slow addition of human sulfuric acid solution (l-5 )25ml, once the carbon dioxide stopped after the release, immediately with sodium thiosulfate titration solution (0.1 mol/L) titration, when the end point, add 2ml of starch indicator solution, continue titration until the blue disappeared, and do a blank test; Both consume sodium thiosulfate titration solution (0.lmol/L) the difference should not exceed 2.0 (0.10%).

ignition residue

take 2.0g of this product and check it according to law (General rule 0841). The remaining residue shall not exceed 0.1%.

calcium salt

take this product l. Add 1 ml of ammonia test solution and 5ml of ammonium oxalate test solution, shake well, place for 1 hour, and mix with standard calcium solution (accurately weigh 0.125g of calcium carbonate and put it in a 500ml measuring flask), add water 5ml and hydrochloric acid 0.5ml to dissolve, add water to the scale, shake. Each 1 ml is equivalent to 0.10 mg of Ca) a control solution made of 5.0 ml should not be more concentrated (0.05%).

Heavy metals

The residue left under the item of ignition residue shall be inspected by law (general law 0821, Law II) and shall not contain more than 5 parts per million of heavy metals.

 

solubility in water (g/100ml)	grams dissolved per 100ml of water at different temperatures (℃): 181.9g/0 ℃;190.6g/10 ℃;201.9g/20 ℃;216.7g/30 ℃;235.6g/40 ℃;259.6g/50 ℃ 288.8g/60 ℃;323.7g/70 ℃;365.1g/80 ℃;414.9g/90 ℃;476g/100 ℃
toxicity	GRAS(FDA,§ 184.1854,2000). Ld5029700 mg/kg (rat, oral).
Use limit	is not restrictive (FDA,§ 184.1854,2000).
Use	nutritive sweetener; Shaping and structuring agent. sucrose is the most common food and sugar, also used in citric acid, caramel, invert sugar, transparent soap. Sucrose can inhibit the growth of bacteria at high concentration, and can be used as a tablet excipient for preservatives and antioxidants. In 1980, the world production of raw sugar was 87.1 million t, including 52 million t of sucrose and 35 million t of beet sugar. Sucrose from sugar cane and sugar beet is limited by the natural conditions of slow development, the world's sugar deficiency is more serious. In addition, various special needs have promoted the research and development of new sweeteners, and many natural sweeteners and synthetic sweeteners have been found. Reagent sucrose is used for the determination of 1-naphthol, and also for the separation of calcium and magnesium and the preparation of biological medium. can be widely used in food, cosmetics, medicine, but also for analytical testing of standards. used as standard for organic elemental analysis reagent sucrose is used for the determination of 1-naphthol, and also for the separation of calcium and magnesium and the preparation of biological medium. Cell culture grade was used for sucrose gradient purification of Virus and protein. Plant cell culture grade is used for cryoprotection in plant cells. Molecular biology grade isobaric Centrifugation Methods for discontinuous sucrose density gradients, such as: isolation of mRNA from membrane bound ribosomes. Multi-substance preservation solution and auxiliary solution biological medium. Separation of calcium and magnesium. Determination of 1-naphthol. Masking agent for Complexometric titration of boron. Standards for the determination of carbon, hydrogen and oxygen by organic microanalysis.
production method	sucrose comes in large amounts from cane sugar and sugar beet, sugar cane contains about 15-20% sucrose and sugar beet 10-17%. Various other fruits, seeds, leaves, flowers, roots also have different content. The sugar cane is squeezed out or the sugar beet slices are extracted with water, and the lime clarification method or the sulfurous acid saturation method is used to remove the impurities in the sugar juice. After filtration, the filtrate is concentrated in vacuum, recrystallization and separation of crude sugar, and then by decolorization, recrystallization and refined sugar. obtained by clarification, evaporation and crystallization of sugar cane or sugar beet after pressing or Diafiltration.

Our advantage:

1. High quality with competitive price:

1) Standard:BP/USP/EP/Enterprise standard

2) All Purity≥99%

3) We are manufacturer and can provide high quality products with factory price.

 2, Fast and safe delivery

1) Parcel can be sent out in 24 hours after payment.Tracking number available

2) Secure and discreet shipment.Various transportation methods for your choice.

3) Customs pass rate ≥99%

4) We have our own agent/remailer/distributor who can help us ship our products very fast and safe,

and we have stock in there for transferring.

Product Packaging：

1) 1kg/bag (1kg net weight, 1.1kg gross weight, packed in an aluminum foil bag)

2) 25kg/drum (25kg net weight, 28kg gross weight; Packed in a cardboard-drum with two plastic-bags inside; Drum Size: 510mm high, 360mm diameter)

 Storage：

Stored in a cool and dry well-closed container. Keep away from moisture and strong light/heat.

Delivery：

Usually within3-5 working days after full payment.

transport：

EMS,DHL, TNT, UPS ,FEDEX, BY AIR, BY SEA

DHL Express, FedEx and EMS for quantity less than 50KG, usually called as DDU service; 

Sea shipping for quantity over 500KG; And air shipping is available for 50KG above;

For high value products, please select air shipping and DHL express for safe;

Our Service:
1. Fast Delivery: We can delivery within 24 hours upon receipt of your payment.
2. Quality can be promised. Hot sell to Worldwide.
3. Payment Terms: T/T,, t/t
4. Free Sample available at any time.
5. Tracking your order at any time. Inform your order's further new situation at any time.
6. Package: Professional packing with professional materials.

 

Packing:  
  1. Inner double plastic bags----25kg/Fiber drum (35*35*45cm, GW: 28kg, NW: 25kg); 

  2. Inner double plastic bags----5kg/Aluminum foil bag (GW: 6.5kg, NW: 5kg). 

  3. Inner double plastic bags----1kg/Aluminum foil bag (GW: 1.5kg, NW: 1kg). 

P.S.: we accept packaging customization. 

  
Delivery:   

  1. Stock products are normally shipping within 3 working days.  

  2. For rush delivery, please contact our sales team for particular arrangement. 

Shipping Details: 
  1. We ship goods via DHL, Fedex, UPS, TNT, China post, NL Post and other couriers, weight from 10g to 1000kg or even bulker. 

  2. Shipping details & shipping documents will be provided and sent by email. 

  3. We keep tracking the shippment until clients well received. 

  4. After years export shipping experience, with professional and experienced cooperated forwarders, we ensure that goods can be delivered in multiple ways safetly and efficiently. 

About us

Our company specializes in processing and selling chemical raw materials, chemical products, pharmaceutical intermediates, veterinary medicine intermediates, dye intermediates, pigments, cosmetics raw materials and chemical reagents,  

We have compalete sales and service team , information feedback vertical integration of a sound marketing network, products are sold throughout the country and exported to South Asia, Europe, America, Africa and other more than 20 countries and regions.  

Companies adhering to the "pursuit of quality, innovation and development" business philosophy, to serve as a foundation, for the survival by the quality, seek development by science and technology, adhere to quilty comes first,fair price,good sense of customer service and responsibility. in the future hebei Nengqian import and export trade Co.,Ltd will always hold "integrity, innovation" business philosophy, to achieve honesty management, on the way of specialization, internationalization,  Keep moving!  

 

FAQ: 
1. Are you a trade company or factory   
We are a  factory with our own trading company.  

2.How do you control the quality   
Our factory is equipped with professional technicians to control quality, out inspectors take sample for testing every 2 hours to ensure the quality of our production. We also accept BV, SGS or any other Third-party inspection.   

3. How long is lead time   
We deliver goods within 3 days for small order, 7-10 days for bulk order.   

4. Where is your factory located  How can I visit the factory   
 Our factory located in HEBEI, China.

5. Can i get some samples  
  Yes, we can supply free sample, but the shipping cost be paid by our customers. 

6. How to start orders or make payments  
  Proforma invoice will be sent first after confirmation of order, enclosed our bank information.Payment by T/T,  

7. How to confirm the Product Quality before placing orders  
  You can get free samples for some products,you only need to pay the shipping cost or arrange a courier to us and take the samples. 
  You can send us your product specifications and requests,we will manufacture the products according to your requests. 

8. How long is lead time

We deliver goods within 3 days for small order, 7-10 days for bulk order.

 

9. How do you treat quality complaint

  First of all, our quality control will reduce the quality problem to near zero. If there is a realquality problem caused by us, we will send you free goods for replacement or refund your loss.