Details:

Our advantage:

1. High quality with competitive price:

1) Standard:BP/USP/EP/Enterprise standard

2) All Purity≥99%

3) We are manufacturer and can provide high quality products with factory price.

 2, Fast and safe delivery

1) Parcel can be sent out in 24 hours after payment.Tracking number available

2) Secure and discreet shipment.Various transportation methods for your choice.

3) Customs pass rate ≥99%

4) We have our own agent/remailer/distributor who can help us ship our products very fast and safe,

and we have stock in there for transferring.

Molar Mass	138.21
Density	2.43 g/mL at 25 °C
Melting Point	891 °C (lit.)
Boling Point	decomposes [STR93]
Water Solubility	1120 g/L (20 ºC)
Solubility	Easily soluble in water, insoluble in ethanol and ether.
Appearance	White powder or granule
Specific Gravity	2.29
Color	Yellow
Maximum wavelength(λmax)	['λ: 260 nm Amax: 0.03', , 'λ: 280 nm Amax: 0.02']
Merck	14,7619
BRN	4267587
pKa	10.33[at 20 ℃]
PH	10.52(1 mM solution);11(10 mM solution);11.36(100 mM solution);
Storage Condition	Store at +5°C to +30°C.
Stability	Stable. Incompatible with moisture, acids, magnesium bromine trifluoride and magnesium bromine trichloride.
Sensitive	Hygroscopic
MDL	MFCD00011382
Physical and Chemical Properties	Characteristics of monoclinic, white powder or fine granular crystal. melting point 891 ℃ relative density 2.428 solubility: soluble in water, insoluble in ethanol and ether.
Use	Used in glass, printing and dyeing, soap, enamel, preparation of potassium salt, ammonia decarbonylation, also used in color TV industry, mainly used in food as leavening agent

Overview	Potassium carbonate (chemical formula: K2CO3, English Potassium carbonate) also known as potash, the appearance of colorless crystals or white particles, very soluble in water, the solution is strongly alkaline. Cooling its saturated aqueous solution, there is a glass-like monoclinic crystal hydrate 2K 2Co3 · 3H2O Crystal separation, density of 2.043, at 100 deg C to lose water of crystallization. Insoluble in ethanol, acetone and ether. Strong hygroscopicity, exposure to air can absorb carbon dioxide and moisture, into potassium bicarbonate. It can be obtained by reacting potassium hydroxide with carbon dioxide. It can also be obtained by co-heating potassium chloride with magnesium carbonate, water and carbon dioxide under pressure, or by impregnation of Tung seed ash and plant ash. Mainly used for synthesis gas decarburization, electron tube, glass, enamel, printing and dyeing, electrode, film development, inorganic salt and picture tube glass shell of raw materials, impure potassium carbonate common name grass alkali, Tung alkali or bead Ash, one of the early varieties of potassium fertilizer.
reference quality standard	project top grade first grade qualified product type II potassium carbonate (K2CO3) content ≥ 99.0% 98.5% 96.0% 99.0% chloride (calculated by KCl) ≤ 0.01% 0.10% 0.20% 0.03% sulfur compound (calculated by K2SO4) ≤ 0.01% 0.10% 0.15% 0.04% iron (Fe) content ≤ 0.001%, 0.003%, 0.010%, 0.001% water-insoluble content ≤ 0.02%, 0.05%, 0.10%, 0.04% combustion loss ≤ 0.60%, 1.00%, 1.00%, 0.80%
content analysis	in a weighed weighing bottle with a plug, 1g of a dried sample obtained by the "loss on drying" method was precisely weighed and dissolved in 50ml of water. After adding 2 drops of Methyl red test solution (TS-149), the solution was titrated slowly with 1mol/L hydrochloric acid under constant stirring until the solution became pale pink. The solution was heated to boiling and cooled, and titration was continued until the pale pink color did not disappear after boiling. Each Ml of 1mol/L hydrochloric acid corresponds to 69.10mg of potassium carbonate (K2CO3).
solubility of potassium carbonate in water	maximum dissolved grams per 100g of water at different temperatures (℃): 107g/0 °c; 109g/10 °c; 111g/20 °c; 114g/30 °c; 117g/40 °c; 126g/60 °c; 139g/80 °c; 156g/100 °c.
toxicity	ADI is not specified (FAO/WHO,2001). LD50 18.70mg/kg (rat, oral). GRAS(FDA,§ 184.1619,2000).
Use limit	GB 2760-2001: pasta products, beverages, processing aids, GMP is limited. FAO/WHO(1984): Low-power concentrated milk, sweetened condensed milk, cream (2g/kg alone, 3g/kg combined with other stabilizers, based on Anhydrous); Milk powder, cream powder 5g/kg (based on Anhydrous); Jam and jelly, orange peel jelly (to maintain the pH value of 2.8~3.5); Infant formula (according to GMP); chocolate 50g/kg (by the cocoa beans, cocoa beans, cocoa liquid, cocoa cake, etc. into the part); Cocoa powder and sugar cocoa powder, cocoa beans, cocoa liquor and cocoa cake 5g/kg (calculated as non-fat cocoa and K2CO3, used in the manufacture of cocoa and chocolate products).
four production methods	the plant ash method is the oldest method, namely from various plant hulls (e. G, tea shells, Tung shells, sunflower shells) were extracted from the burned plant ash. Plant ash contains potassium carbonate, potassium sulfate, potassium chloride and other soluble salts, which can be separated by leaching, evaporation and crystallization. This method is rarely used because of low product quality, uneconomical, and limited by the source of raw materials. The lublan method is to mix potassium sulfate with coal powder and lime, and reduce roasting to obtain black ash (containing potassium carbonate, calcium sulfide and other sintered materials). After leaching, filtering, evaporation and carbonization, potassium bicarbonate is obtained, the product is then filtered and calcined. This method has been replaced by other methods due to the long process flow and so on. In the electrolysis method, the potassium hydroxide solution obtained after the electrolysis of potassium chloride is carbonized with carbon dioxide in a carbide tower. After multiple effect evaporator evaporation, filtered potassium bicarbonate, and then calcined to produce products. This method is widely used because of the availability of raw materials, high utilization rate of potassium and no three wastes, but it consumes more electricity. Ion exchange is the exchange of potassium chloride with a cation exchange resin. Then ammonium bicarbonate is eluted into dilute solution of potassium bicarbonate, and the product is obtained by multi-effect evaporation, carbonization, crystallization, separation and calcination. This method has good product quality, short process flow and is suitable for small-scale production.
Use	used in glass, printing and dyeing, making soap, enamel, preparation of potassium salt, pharmaceutical, etc., used as gas adsorbent, dry powder fire extinguishing agent, rubber antioxidant and the like is used for the rinsing process of the exposed photosensitive material. It is mainly used for the manufacture of picture tube glass shell in electronic industry, decarburization in chemical fertilizer production and potassium salt production It is used as analytical reagent, flux, and also used for the preparation of various potassium salts used for analytical reagent, reference Reagent and flux of molten silicate and insoluble sulfate used as food additive can be used as leavening agent in food; Can also be used for glass, printing and dyeing, soap, enamel, preparation of potassium salt, decarbonylation of synthetic ammonia is also used in the color television industry. used in glass, printing and dyeing, soap, enamel, preparation of potassium salt, synthetic ammonia decarbonylation, also used in color television industry, mainly used in food as leavening agent analysis reagent. High purity analysis. Emission spectrum analysis. Flux for silicates and insoluble sulfates. Water-absorbing agent for organic liquids. Electroplating. Chemical fertilizer. For photography. It is used as an alkaline agent and dough improver, and can inhibit the acid of noodles. It can be used in flour food and used in an appropriate amount according to the production needs. for the production of optical glass, glass transparency, strength and refractive index can be improved. Also used in the production of welding electrode, can prevent the phenomenon of arc breaking during welding. For the production of vat dyes and its dyeing and ice dyeing white. It is used as an adsorbent for the removal of hydrogen sulfide and carbon dioxide. Mixed with soda ash can be used as a dry powder extinguishing agent. It can also be used as auxiliary raw materials for acetone, alcohol production and antioxidant in rubber production. The aqueous solution can be used for cooking cotton and degreasing wool. In addition, it is also used in the production of ink, photographic medicine, polyester, medicine, electroplating, leather making, ceramics, building materials, Crystal, potassium soap and medicine. Heavy potassium carbonate is mainly used as the raw material of the picture tube glass shell, and is widely used in glass and special glass raw materials for decarburization of large chemical fertilizer.
production method	ion exchange method potassium chloride was prepared as a 250g/L solution, and a small amount of potassium carbonate was added to remove calcium and magnesium ions. Ammonium bicarbonate was also prepared as a 200g/L solution with water. The potassium chloride solution is passed into the ion exchange column in Countercurrent, so that R-Na of the sodium-type resin is changed into R-K of the potassium-type resin. The residual chloride ions in the resin gap are washed with soft water, the resin is changed to ammonium type R-NH4 to obtain a mixed dilute solution of potassium bicarbonate and ammonium bicarbonate. After one evaporation, the ammonium bicarbonate is decomposed, and then the potassium bicarbonate is decomposed into potassium carbonate by the second evaporation, the crystals of potassium chloride precipitated by cooling were removed by filtration and then three times evaporated to 54 ° Bé by filtration to remove the potassium-sodium double salt. The solution is carbonized to make potassium carbonate into potassium bicarbonate, and then crystallized, separated, washed with water and calcined to obtain a finished product. Potassium chloride is dissolved by R-Na + KCl → R-K + NaClR-K + NH4HCO3 → R-NH4 + KHCO32KHCO3 → K2CO3 + CO2 ++ H2O electrolysis, with the concentration of 270~300g/L, add an appropriate amount of potassium carbonate and potassium hydroxide to remove calcium and magnesium ions, after the solution is clear, adjust to pH 8~10 with hydrochloric acid, at a cell voltage of 2.8~3.5V, the potassium hydroxide solution with a concentration of 10% to 15% is obtained by electrolysis at a bath temperature of 60 to 70 ° C., and when the potassium hydroxide concentration is concentrated to 50% by evaporation, the solution is cooled to 30 to 35 ° C., and the precipitated potassium chloride is recovered and reused. Dilute the concentrated alkali solution to about 44%, and perform pre-carbonization. When the potassium hydroxide reaches below 30g/L, filter to remove the magnesium hydroxide precipitate, then concentrate to remove sodium, and then perform carbonization to obtain crude potassium carbonate, potassium bicarbonate crystals were obtained by continuous carbonization, and the crystals were washed with water, centrifuged and calcined to obtain refined potassium carbonate product. The 2KCl + 2H2O [electrolysis] → 2KOH + Cl2 ++ H2 + 2KOH + CO2 → K2CO3 + H2OK2CO3 + CO2 → 2KHCO32KHCO3 → K2CO3 + CO2 ++ H2O plant ash method mainly uses a variety plant shells, such as Tung shells, cottonseed shells, tea shells and sunflower shells, fired into plant ash, plant ash is a mixture of potassium carbonate, potassium sulfate, potassium chloride. They were separated by leaching, evaporation and crystallization. There are many kinds of purification methods, or add magnesium carbonate phosphorus removal, or into the carbon dioxide pre-carbonization impurity removal. Or add lime milk phosphorus removal, aluminum, silicon and so on. After secondary evaporation, cooling, separation, and then dried to produce potassium carbonate products. Limited by the source of raw materials, this method is not suitable for large-scale production, has been eliminated. The potassium sulfate, coal powder and limestone are mixed according to a certain ratio by the lublan method, and water is added to stir. The potassium chloride is controlled at 6%~ 8%, the sodium salt is controlled at 8%~ 10%, and then calcined at 900~1000 ℃ to obtain black ash. The black ash was pulverized, leached with hot water, and the leaching solution was evaporated to precipitate part of the unconverted potassium sulfate. After separation, the clear liquid was sent to the carbonizing tower for pre-carbonization. The carbonized liquid is added with potassium permanganate to precipitate impurities such as aluminum, silicon and iron, and the filtrate is evaporated to precipitate potassium carbonate, sodium double salt and impurities. The clear liquid is subjected to secondary carbonization to obtain crude potassium carbonate crystals, which are then filtered, the mixture was washed with water and then calcined in a calciner at 500-600 °c to form a potassium carbonate product. Its K2SO4 + 2C + CaCO3 → K2CO3 + CaS +2CO2 ↑k2co3 + CO2 + H2O → 2KHCO32KHCO3 → K2CO3 + CO2 ++ H2O 1 potassium chloride solution refined by ion exchange method (250g/L) it was adsorbed through a cationic resin (732) column and washed with distilled water until no chloride ions eluted. It is then eluted with 200g/L of ammonium bicarbonate until the potassium ion in the effluent is below 2G/L. Heat the eluent to 150 ℃, concentrate the solution to a relative density of about 1.593, and then inject CO2 gas for carbonization to precipitate potassium bicarbonate crystals, after centrifugation, potassium bicarbonate was decomposed into potassium carbonate by hot air at about 400 °c. KCl + NH4HCO3 → KHCO3 + NH4Cl2KHCO3 → K2CO3 + CO2 ++ H2O · 2 electrolysis potassium chloride dissolved in water (280g/L), Then, appropriate amount of potassium carbonate and potassium hydroxide was added to the refining tank to remove Ca2 + and Mg2 +. After clarification, the pH value was adjusted to 8-10 with hydrochloric acid and sent to the diaphragm electrolytic tank for electrolysis. The cell voltage is 2.8~3.5V and the cell temperature is 60~70 ℃. The content of KOH in the electrolyte is 10% ~ 15%, and it is concentrated to 50% by evaporation, cooled to 30~50 ℃, and KCL is precipitated to separate the potassium chloride solution, and the solution is pre-carbonized, when the KOH concentration was below 30g/L, the Fe(OH)3 precipitate was removed by filtration. Then, concentration was continued to 50%, and secondary carbonization was performed to precipitate potassium bicarbonate. After separation at 300 deg C hot air drying (decomposition) to obtain potassium carbonate. Food grade potassium carbonate also requires the above-mentioned industrial products to be dissolved in water, and a reducing agent is added to remove heavy metals and arsenic. After concentration, crystallization, centrifugation, drying and grinding, food grade potassium carbonate was obtained. 2KCl + 2H2O → 2KOH + Cl2 ++ H2 ++ KOH + CO2 → KHCO32KHCO3 → K2CO3 + CO2 ++ H2O +3 plant ash method utilizes various plant fruit shells (such as cotton seed shells, tea seed shells, sunflower seed shell, etc.), calcined into plant ash, its main components are potassium carbonate, potassium sulfate and potassium chloride. Firstly, warm water is used to dissolve and extract, and a small amount of lime milk is added to the extract, filtered, clarified and evaporated to a relative density of 1.318, cooled, crystallized and filtered to remove potassium sulfate. Concentration of the mother liquor to a relative density of 1.526, The crystals were cooled and filtered to remove potassium chloride. The mother liquor was concentrated until only crystals were precipitated, the crystals were cooled and filtered to obtain potassium carbonate. It can also be completely dissolved with water, into the CO2 gas, so that all the potassium carbonate into potassium bicarbonate crystal precipitation, potassium bicarbonate calcined potassium carbonate. 2KHCO3 → K2CO3 + CO2 ++ H2O recrystallization industrial grade potassium carbonate was dissolved in distilled water, solution purification, filtration to remove impurities, the filtrate was concentrated by evaporation, cooling crystallization, centrifugal separation, drying, preparation of anhydrous potassium carbonate product.

Product Packaging：

1) 1kg/bag (1kg net weight, 1.1kg gross weight, packed in an aluminum foil bag)

2) 25kg/drum (25kg net weight, 28kg gross weight; Packed in a cardboard-drum with two plastic-bags inside; Drum Size: 510mm high, 360mm diameter)

 Storage：

Stored in a cool and dry well-closed container. Keep away from moisture and strong light/heat.

Delivery：

Usually within3-5 working days after full payment.

transport：

EMS,DHL, TNT, UPS ,FEDEX, BY AIR, BY SEA

DHL Express, FedEx and EMS for quantity less than 50KG, usually called as DDU service; 

Sea shipping for quantity over 500KG; And air shipping is available for 50KG above;

For high value products, please select air shipping and DHL express for safe;

Our Service:
1. Fast Delivery: We can delivery within 24 hours upon receipt of your payment.
2. Quality can be promised. Hot sell to Worldwide.
3. Payment Terms: T/T,, t/t
4. Free Sample available at any time.
5. Tracking your order at any time. Inform your order's further new situation at any time.
6. Package: Professional packing with professional materials.

 

Packing:  
  1. Inner double plastic bags----25kg/Fiber drum (35*35*45cm, GW: 28kg, NW: 25kg); 

  2. Inner double plastic bags----5kg/Aluminum foil bag (GW: 6.5kg, NW: 5kg). 

  3. Inner double plastic bags----1kg/Aluminum foil bag (GW: 1.5kg, NW: 1kg). 

P.S.: we accept packaging customization. 

  
Delivery:   

  1. Stock products are normally shipping within 3 working days.  

  2. For rush delivery, please contact our sales team for particular arrangement. 

Shipping Details: 
  1. We ship goods via DHL, Fedex, UPS, TNT, China post, NL Post and other couriers, weight from 10g to 1000kg or even bulker. 

  2. Shipping details & shipping documents will be provided and sent by email. 

  3. We keep tracking the shippment until clients well received. 

  4. After years export shipping experience, with professional and experienced cooperated forwarders, we ensure that goods can be delivered in multiple ways safetly and efficiently. 

About us

Our company specializes in processing and selling chemical raw materials, chemical products, pharmaceutical intermediates, veterinary medicine intermediates, dye intermediates, pigments, cosmetics raw materials and chemical reagents,  

We have compalete sales and service team , information feedback vertical integration of a sound marketing network, products are sold throughout the country and exported to South Asia, Europe, America, Africa and other more than 20 countries and regions.  

Companies adhering to the "pursuit of quality, innovation and development" business philosophy, to serve as a foundation, for the survival by the quality, seek development by science and technology, adhere to quilty comes first,fair price,good sense of customer service and responsibility. in the future hebei Nengqian import and export trade Co.,Ltd will always hold "integrity, innovation" business philosophy, to achieve honesty management, on the way of specialization, internationalization,  Keep moving!  

 

FAQ: 
1. Are you a trade company or factory   
We are a  factory with our own trading company.  

2.How do you control the quality   
Our factory is equipped with professional technicians to control quality, out inspectors take sample for testing every 2 hours to ensure the quality of our production. We also accept BV, SGS or any other Third-party inspection.   

3. How long is lead time   
We deliver goods within 3 days for small order, 7-10 days for bulk order.   

4. Where is your factory located  How can I visit the factory   
 Our factory located in HEBEI, China.

5. Can i get some samples  
  Yes, we can supply free sample, but the shipping cost be paid by our customers. 

6. How to start orders or make payments  
  Proforma invoice will be sent first after confirmation of order, enclosed our bank information.Payment by T/T,  

7. How to confirm the Product Quality before placing orders  
  You can get free samples for some products,you only need to pay the shipping cost or arrange a courier to us and take the samples. 
  You can send us your product specifications and requests,we will manufacture the products according to your requests. 

8. How long is lead time

We deliver goods within 3 days for small order, 7-10 days for bulk order.

 

9. How do you treat quality complaint

  First of all, our quality control will reduce the quality problem to near zero. If there is a realquality problem caused by us, we will send you free goods for replacement or refund your loss.