Add time:07/26/2019         Source:sciencedirect.com

Tungsten borides belong to the group of potentially superhard materials which hardness could be compared to cubic boron nitride and diamond. However, difficulty in fabrication of single phase material using conventional methods is the main drawback of this group of ceramics. In order to overcome this problem material can be deposited as a thin layer e.g. in the pulsed laser deposition process. In this paper, the effect of laser wavelength and energy density of nanosecond Nd:YAG laser on the WBx-type layers were analyzed using wavelengths 355 and 1064 nm with the energy density of laser beam from 1.7 to 5 J/cm2 and from 1.7 to 9.3 J/cm2, respectively. The WB2.5 and WB4.5 targets synthesized in Spark Plasma Sintering process were used and the layers were deposited onto Si (100) substrate heated to a temperature of 570 °C. Layers' microstructure were analyzed using X-ray Diffraction and scanning electron microscope equipped with energy dispersive X-ray spectrometer. Change of laser wavelength and energy density resulted in variations of the chemical composition and morphology of deposited layers. Finally, W2B-βWB, αWB-WB-WB3 and WB3, and boron layers were deposited wherein WB3 structure is formed in a wide range of laser fluences and at both investigated wavelength. Next, WB3 layers were investigated in the indentation test at a load of 5–30 mN and its hardness was up to 50 ± 10 GPa.

We also recommend Trading Suppliers and Manufacturers of TUNGSTEN BORIDE (cas 12007-09-9). Pls Click Website Link as below: cas 12007-09-9 suppliers