Add time:07/30/2019         Source:sciencedirect.com

More than half of the global cobalt supply from primary sources is currently produced in the Democratic Republic of Congo (DRC) from ores containing copper-cobalt oxides or copper-cobalt sulphides. Where oxide and sulphide cobalt-bearing copper minerals occur together, efficient recovery of copper and cobalt is known to be extremely difficult. This study investigates the flotation behaviour of a mixed oxide-sulphide ore where copper is hosted in sulphides phases such as bornite, chalcopyrite and chalcocite, and oxide phases such as malachite and to a lesser extent chrysocolla. Three cobalt-bearing oxide minerals are observed in the mixed ore, i.e. heterogenite, kolwezite and cupro-asbolane, while carrollite is the only cobalt-bearing sulphide mineral. A two-stage rougher-scavenger flotation process is used in which sulphides are extracted from the ore first. In the second stage, oxides are activated using controlled potential sulphidisation followed by their recovery. Tests are performed with a range of collectors, including xanthate, phosphorodithioate, dithiophosphate, thiocarbamate, and a blend type. A dithiophosphate collector proved to the most successful, achieving recovery of 94% of the carrollite, more than 90% of the copper sulphides, and 70% of the copper oxide minerals. The recovery of the cobalt oxides was less successful, with recovery of roughly half the kolwezite and only 20% of the heterogenite and cupro-asbolane. Despite the generally promising recoveries, the selectivity of the flotation process is relatively low with all the concentrates containing a significant amount of carbonate and silicate minerals. This suggests that a number of improvements require further investigation, notably the application of hydroxamate collectors, depressants and reverse flotation.

We also recommend Trading Suppliers and Manufacturers of SEC-BUTYL METHYL SULFIDE (cas 10359-64-5). Pls Click Website Link as below: cas 10359-64-5 suppliers