Add time:08/01/2019         Source:sciencedirect.com

In this study, the removal effect of arsenic(V) was compared with different lead-containing substances, and the process of arsenic(V) removal with lead oxide was optimized. The results showed that As(V) removal efficiencies with lead powder, lead oxide, lead hydroxide and lead nitrate were 26.5%, > 99.9%, 98.5% and 96.3% at lead/arsenic(Pb/As) molar ratio of 2.12, respectively. Arsenic(V) removal with lead and its compounds was mainly based on the formation of mimetite. The removal of arsenic with lead oxide did not introduce impurity anions, and the crystallization performance and stability of the precipitate were relatively better than those of the precipitates obtained with other lead-containing substances. The crystallization performance of the precipitate was obviously improved when lead oxide was added twice. Using pH-conditioning in the process of arsenic removal, the residual lead in the solution could be removed via the co-precipitation of the hydrolysis of Pb2+ with mimetite. The highest As(V) leaching concentration of As—Pb precipitates was 0.2 mg/L at the pH of 1.9–12.3 with the leaching time of 1–48 h, and the stability of As—Pb precipitates could be improved by washing with dilute nitric acid. Lead oxide could be used as an effective reagent of arsenic removal in aqueous chloride solution.

We also recommend Trading Suppliers and Manufacturers of lead chloride oxide (cas 12205-72-0). Pls Click Website Link as below: cas 12205-72-0 suppliers