Add time:08/01/2019         Source:sciencedirect.com

The aim of this study is to investigate the beneficial effect of utilizing MgO nanoparticles on the performance of ferrate(VI) oxidation process to remove blue-203 dye from wastewater. It was also made an attempt to assess the effects of pH, temperature, and MgO nanoparticle dosage on this oxidation process performance. Several sets of batch experiment were conducted to find out the effects of temperature ranging from 25 to 65 °C, pH ranging from 1.5 to 13, ferrate(VI) concentration ranging from 0.5 to 5.9 mg/L and MgO nanoparticles dosage ranging from 0.01 to 0.05 g in 150 mL solution on the removal efficiency. The results showed that adding MgO nanoparticles can improve the performance of ferrate(VI) oxidation removal method significantly, spec. at basic conditions. This synergistic effect can be attributed to the simultaneous adsorption of ferrate(VI) and dye molecules on the surface of nanoparticles. The results also revealed that the reaction between blue-203 dye and ferrate(VI) takes place rapidly at high mixing rate. It means that the required time to complete the removal process is controlled by mixing rate. It was finally concluded that adding MgO nanoparticles was an efficient means to enhance the performance of ferrate(VI) to oxidize blue-203 dye, esp. under basic conditions.

We also recommend Trading Suppliers and Manufacturers of Basic Blue 62 (cas 12221-36-2). Pls Click Website Link as below: cas 12221-36-2 suppliers