Encyclopedia

  • Degradation of reactive blue 13 using hydrodynamic cavitation: Effect of geometrical parameters and different oxidizing additives
  • Add time:08/04/2019         Source:sciencedirect.com

    Decolorization of reactive blue 13 (RB13), a sulphonated azo dye, was investigated using hydrodynamic cavitation (HC). The aim of research article is to check the influence of geometrical parameters (total flow area, the ratio of throat perimeter to its cross-sectional area, throat shape and size, etc.) and configuration of the cavitating devices on decolorization of RB13 in aqueous solution. For this purpose, eight cavitating devices i.e. Circular and slit venturi, and six orifice plates having different flow area and perimeter were used in the present work. Initially, the effects of various operating parameters such as solution pH, initial dye concentration, operating inlet pressure and cavitation number on the decolorization of RB13 have been investigated, and the optimum operating conditions were found. Kinetic analysis revealed that the decolorization and mineralization of RB13 using HC followed first order reaction kinetics. Almost 47% decolorization of RB13 was achieved using only HC with slit venturi as a cavitating device at an optimum inlet pressure of 0.4 MPa and pH of the solution as 2.0. It has been found that in case of orifice plates, higher decolorization rate of 4 × 10−3 min−1 was achieved using orifice plate 2 (OP2) which is having higher flow area and perimeter (α = 2.28). The effect of process intensifying agents (hydrogen peroxide and ferrous sulphate) and different gaseous additives (oxygen and ozone) on the extent of decolorization of RB13 were also examined. Almost 66% decolorization of RB13 was achieved using HC combined with 2 L min−1 of oxygen and in combination with ferrous sulphate (1:3). Nearly 91% decolorization was achieved using HC combined with H2O2 at an optimum molar ratio (dye:H2O2) of 1:20 while almost complete decolorization was observed in 15 min using a combination of HC and ozone at 3 g h−1 ozone feed rate. Maximum 72% TOC was removed using HC coupled with 3 g h−1 ozone feed rate.

    We also recommend Trading Suppliers and Manufacturers of Reactive blue 52 (cas 12225-63-7). Pls Click Website Link as below: cas 12225-63-7 suppliers


    Prev:Equilibrium and kinetic studies of C.I. Basic Blue 41 adsorption onto N, F-codoped flower-like TiO2 microspheres
    Next: The chemical degradation of C.I. Acid Brown 349 in aqueous solution using hydrogen peroxide and sodium hypochlorite and its implications for biodegradation)

About|Contact|Cas|Product Name|Molecular|Country|Encyclopedia

Message|New Cas|MSDS|Service|Advertisement|CAS DataBase|Article Data|Manufacturers | Chemical Catalog

©2008 LookChem.com,License: ICP

NO.:Zhejiang16009103

complaints:service@lookchem.com Desktop View