Add time:08/08/2019         Source:sciencedirect.com

In this study, we used Silica/polyvinyl imidazole core-shell nanoparticles impregnated with sodium dihydrogen phosphate (SiO2/PVI/H2PO4− NPs) for adsorption of samarium and dysprosium ions from aqueous solutions. The effects of the pH, adsorbent dose, contact time, and initial concentration of the adsorbate on the Core-shell nanoparticles adsorption capacity have been studied. The pH value for maximum removal of Sm (III) and Dy (III) on the core-shell nanoparticles surface were found to be 4. The saturated capacity of SiO2/PVI/H2PO4− NPs was up to 160 mg.g−1 and 150 mg.g−1at 25 °C for Sm (III) and Dy (III) ions respectively. The obtained uptake data were analyzed by the Langmuir and Freundlich equations using a linearized correlation coefficient at room temperature. The Freundlich isotherm was found to fit well with the equilibrium data. The adsorption kinetics could be modeled by a pseudo-second-order rate expression. Thermodynamic investigation revealed the adsorption process of the studied ions is entropy driven. Furthermore, the performance of regeneration and reutilization were studied. The adsorbed Sm (III) and Dy (III) can be desorbed by 0.5 mol/L HCl, with the desorption percentage of 90% for Sm (III) and Dy (III). After five adsorption–desorption cycles, the adsorption capacity shows a slight decrease (about 15%), implying that the SiO2/PVI/H2PO4− NPs can be used as an effective adsorbent for the removal and recovery of Sm(III) and Dy(III) from aqueous solution. The colloid stability of the SiO2/PVI/H2PO4− NPs was investigated by dynamic light scattering measurements. The SiO2/PVI/H2PO4− NPs are stable in adsorption media after five adsorption – desorption cycles. The high stability of SiO2/PVI/H2PO4− NPs can be attributed to steric stabilization by polyvinyl imidazole adsorbed on SiO2 nanoparticle surfaces.

We also recommend Trading Suppliers and Manufacturers of LANTHANUM(III) BROMIDE HEPTAHYDRATE (cas 13465-19-5). Pls Click Website Link as below: cas 13465-19-5 suppliers