Add time:08/12/2019         Source:sciencedirect.com

Hydrogen embrittlement is no doubt a limiting factor in the high performance applications of many intermetallics. This is mainly because of the inward diffusion of hydrogen atoms and formation of brittle hydride phases during hydrogen exposure of the intermetallic components that resulted in lowering the component's ductility and fracture toughness. γ-TiAl intermetallic is not an exception in this regard. The present study dealt with the method of providing oxide based glass–ceramic coatings on the surface of γ-TiAl by vitreous enameling technique to protect the substrate from the detrimental effect of hydrogen at high temperatures like 800 °C at 0.1 MPa gas pressure for up to 75 h. Results showed that although the uncoated γ-TiAl alloy was severely affected by the hydrogen exposure test, the coated samples were remained mostly unaffected after the test with minimum changes in their microstructure. While the gain in weight of the uncoated alloy after 75 h of H2 permeation test was ~ 1.05 mg/cm2, the weight gain of the two coated samples were only ~ 0.12 mg/cm2 for BaO–SiO2–MgO and ~ 0.15 mg/cm2 for MgO–SiO2–TiO2 glass–ceramic coated substrates. As revealed from the XRD phase analysis, after the high temperature exposure of the coated samples in flowing H2 for up to 75 h, the coated layers were only enriched with their major crystalline phases with little or no trace of the detrimental hydride phases, whereas, in the uncoated alloy, presence of aluminum hydride and titanium hydrides were observed.

We also recommend Trading Suppliers and Manufacturers of BARIUM ALUMINIDE (cas 12253-23-5). Pls Click Website Link as below: cas 12253-23-5 suppliers