Add time:08/09/2019         Source:sciencedirect.com

In the present work, phosphate-bonded porous silicon carbide (SiC) ceramics were prepared by using Aluminum dihydrogen phosphate (cas 13530-50-2) as binder. The morphologies, phase composition, microstructures, mechanical strength, porosity and bulk density of the porous ceramics were investigated. It was found that the aluminum dihygrogen phosphate binder bonding method was a novel and low cost process to prepare near net-shape and high strength porous SiC ceramics at low temperature. The bonding mechanism was A type and B type aluminum metaphosphate which formed from aluminum dihygrogen phosphate during heat treatment bonded the SiC particles together to form porous ceramics. With temperature increasing, the phase of B type gradually transformed into A type aluminum metaphosphate, and the transformation was completed at 900 °C. The A type aluminum metaphosphate began to decompose into AlPO4 and P2O5 when the sintered temperature higher than 908 °C. The flexural strength of the porous SiC ceramics reached the maximum at 900 °C and decreased sharply with temperature increasing. The decomposition of A type aluminum metaphosphate made the strength reduce. The bulk density increased with aluminum dihydrogen phosphate content and decreased with temperature, in contrast, the porosity decreased with increasing binder content and temperature.

We also recommend Trading Suppliers and Manufacturers of Aluminum dihydrogen phosphate (cas 13530-50-2). Pls Click Website Link as below: cas 13530-50-2 suppliers