Add time:08/12/2019         Source:sciencedirect.com

Ternary copper-zinc-tin coatings have been prepared by a one-step electrodeposition on molybdenum sputtered soda-lime glass (SLG) (20ÿ20 mm2) from an aqueous pyrophosphate electrolyte at room temperature. The plating bath contains copper(II), zinc(II), tin(II) and potassium pyrophosphate at pH = 10. The influence of pyrophosphate as a complexing agent is characterized by speciation simulation, cyclic voltammetry and linear sweep voltammetry. The electrolyte and deposition conditions were adjusted to deposit ternary coatings with the appropriate copper-poor and zinc-rich composition (Cu/(Zn + Sn) = 0.89 and Zn/Sn = 1.04), making them suitable for preparing kesterite absorber films for photovoltaic applications. The composition is influenced by variation of the deposition potential, pH, temperature, composition of the electrolyte and control of the mass transport. The morphology, composition and structure of the as-deposited and selenized films were characterized by scanning electron microscopy (SEM), energy dispersive X-ray spectroscopy (EDX), inductively coupled plasma optical emission spectroscopy (ICP-OES) and X-ray diffraction (XRD). Dense, closed, homogeneous films of ternary copper-zinc-tin alloys with a mirror-bright gray appearance were deposited from the pyrophosphate electrolyte. After selenization, the coatings were matte gray and consisted of micrometer sized grains of pure CZTSe reaching over the complete thickness with only a few voids near the molybdenum back contact.

We also recommend Trading Suppliers and Manufacturers of Copper Pyrophosphate (cas 16570-28-8). Pls Click Website Link as below: cas 16570-28-8 suppliers