Add time:08/24/2019         Source:sciencedirect.com

The research on new functional layer materials and optimization of fabrication in organic light-emitting diode (OLED) has been continuously concerned. In this work, phosphotungstic acid solution used as a precursor is spin-coated onto ITO anode, and then a phosphorus-tungsten oxide (WO3-P2O5) film is obtained after annealing treatment. Various parameters which include film composition, surface morphology, work function and optical property are measured. It suggests that the film has the composition of 24 WO3·P2O5 annealed at 200 °C, which exhibits work function of 5.55 eV, surface root mean square (RMS) roughness value of 1.525 nm and optical transmittance of over 92%. The WO3-P2O5 film is used as hole injection layer (HIL), and the OLED with the structure of [ITO/ WO3-P2O5/ TPD/ Alq3/ LiF/ Al] is fabricated. The performance of device shows turn-on voltage of 2.6 V, maximum luminance of 13553 cd/m2, maximum current efficiency of 5.87 cd/A and maximum power efficiency of 3.44 lm/W, respectively. The results provide a new way to deposit HIL based on solution-processed metal oxide in efficient OLED.

We also recommend Trading Suppliers and Manufacturers of Phosphorus trioxide (cas 1314-24-5). Pls Click Website Link as below: cas 1314-24-5 suppliers