Encyclopedia

  • Full Length ArticleThe influence of flue gas temperature on Lead chloride (cas 12612-47-4) induced high temperature corrosion
  • Add time:08/15/2019         Source:sciencedirect.com

    Firing of waste-based fuels increases the risk for heavy metal-induced corrosion in the furnace walls and in other low-temperature heat transfer surfaces, such as primary superheaters. Lead-containing compounds, especially alkali Lead chloride (cas 12612-47-4)s, have been detected in the boiler water walls, causing severe corrosion. Corrosion rate of chlorine-induced corrosion is known to be dependent on the material temperature and the objective of this work was to study the influence of the flue gas temperature on lead chloride-induced corrosion.The experiments were carried out with full-scale corrosion probe and deposit probe measurements in a recycled wood firing CFB boiler. The material used in the corrosion probe measurements was low alloy steel EN10216-2 16Mo3 and the material temperature was adjusted to 360 °C. Two corrosion and deposit probes were used in different locations in order to expose the probes towards hot, 800 °C, and cooler, 490 °C, flue gas temperatures. Changes of the wall thicknesses were measured and the samples were analysed with SEM/EDS and XRD for more detailed deposit characterisation.Corrosion was detected in both the hot and the cooler flue gas samples. A low melting (T0 = 368 °C) alkali-lead-chloride mixture was identified. Findings from these measurements strongly indicate this mixture to be the corrosion-causing compound at both flue gas temperatures. However, the corrosion rate was higher in the hot flue gas sample compared to the cooler flue gas sample. A much steeper deposit temperature gradient was calculated for the hot flue gas sample, suggesting that the alkali-lead-chloride mixture is in the molten form. These findings, together with the higher proportion of the present alkali-lead-chloride mixture, are the potential factors for the higher corrosion rate in the hot flue gas sample compared to the cooler flue gas sample.

    We also recommend Trading Suppliers and Manufacturers of Lead chloride (cas 12612-47-4). Pls Click Website Link as below: cas 12612-47-4 suppliers


    Prev:Plasticity and divergence in ultraviolet reflecting structures on Dogface butterfly wings
    Next: Full Length ArticleElectrodeposition of lead selenide films from ionic liquids based on choline chloride)

About|Contact|Cas|Product Name|Molecular|Country|Encyclopedia

Message|New Cas|MSDS|Service|Advertisement|CAS DataBase|Article Data|Manufacturers | Chemical Catalog

©2008 LookChem.com,License: ICP

NO.:Zhejiang16009103

complaints:service@lookchem.com Desktop View