Encyclopedia

  • Anionic solution copolymerization of α-methylstyrene with conjugated dienes above the ceiling temperature of α-methylstyrene
  • Add time:08/17/2019         Source:sciencedirect.com

    The successful copolymerization of α-methylstyrene with conjugated dienes such as 1,3-butadiene, isoprene and/or styrene was achieved by anionic solution polymerization in hexane using formulated catalyst systems at the ceiling temperature of α-methylstyrene. This polymerization is unique, since α-methylstyrene cannot homopolymerize above its equilibrium ceiling temperature of 60 °C. Anionic copolymerization of 1,3-butadiene and α-methylstyrene was first performed in hexane at 65 °C using 2/2/1 molar ratio of three different types of catalyst systems; cesium 2-ethylhexoxide (CsOR)/dibutylmagnesium (Mg(Bu)2)/N,N,N′,N′-tetramethylethylene diamine (TMEDA), CsOR/TMEDA/n-butyl lithium (n-BuLi), and potassium amylate (KOAm)/TMEDA/Mg(Bu)2. Polymers produced from the CsOR-based system showed faster incorporation rates of α-methylstyrene than the KOAm-based system, resulting in the composition of α-methylstyrene as high as 50% compared to a maximum of approximately 25% for the KOAm. Very little or no α-methylstyrene blocks were present in the polymer chains. Copolymerizations have also been successfully carried out using CsOR/TMEDA/n-butyl lithium (n-BuLi), although other n-BuLi containing systems were not successful. Other monomers such as isoprene and styrene can be used with the CsOR/TMEDA/Mg(Bu)2 catalyst system to produce randomly α-methylstyrene incorporated multiblock diene copolymers. In α-methylstyrene/styrene/butadiene and α-methylstyrene/isoprene/butadiene/styrene polymerizations, the styrene reacted significantly faster than 1,3-butadiene and α-methylstyrene, while isoprene reacted much slower. This would indicate that a styrene block grows at the beginning of the polymerization, followed by random incorporation of α-methylstyrene, and then a tapered isoprene tail grows at the end of the polymerization.

    We also recommend Trading Suppliers and Manufacturers of methylstyrene, mixed isomers (cas 1321-45-5). Pls Click Website Link as below: cas 1321-45-5 suppliers


    Prev:Simple synthesis of 3-hydroxyquinolines via Na2S2O4-mediated reductive cyclization of (2-(2-nitrophenyl)oxiran-1-yl)(aryl)methanones (o-nitrobenzalacetophenone oxides)
    Next: Effect of different packaging materials containing poly-[2-(tert-butylamino) methylstyrene] on the growth of spoilage and pathogenic bacteria on fresh meat)

About|Contact|Cas|Product Name|Molecular|Country|Encyclopedia

Message|New Cas|MSDS|Service|Advertisement|CAS DataBase|Article Data|Manufacturers | Chemical Catalog

©2008 LookChem.com,License: ICP

NO.:Zhejiang16009103

complaints:service@lookchem.com Desktop View