Encyclopedia

  • Calibration and field evaluation of the Chemcatcher® passive sampler for monitoring Metaldehyde (cas 108-62-3) in surface water
  • Add time:08/21/2019         Source:sciencedirect.com

    Metaldehyde (cas 108-62-3) is a potent molluscicide. It is the active ingredient in most slug pellets used for crop protection. This polar compound is considered an emerging pollutant. Due to its environmental mobility, metaldehyde is frequently detected at impacted riverine sites, often at concentrations above the EU Drinking Water Directive limit of 0.1 µg L−1 for an individual pesticide. This presents a problem when such waters are abstracted for use in the production of potable water supplies, as this chemical is difficult to remove using conventional treatment processes. Understanding the sources, transport and fate of this pollutant in river catchments is therefore important. We developed a new variant of the Chemcatcher® passive sampler for monitoring metaldehyde comprising a Horizon Atlantic™ HLB-L disk as the receiving phase overlaid with a polyethersulphone membrane. The sampler uptake rate (Rs) was measured in semi-static laboratory (Rs = 15.7 mL day−1) and in-field (Rs = 17.8 mL day−1) calibration experiments. Uptake of metaldehyde was linear over a two-week period, with no measurable lag phase. Field trials (five consecutive 14 day periods) using the Chemcatcher® were undertaken in eastern England at three riverine sites (4th September-12th November 2015) known to be impacted by the seasonal agricultural use of metaldehyde. Spot samples of water were collected regularly during the deployments, with concentrations of metaldehyde varying widely (~ 0.03–2.90 µg L−1) and often exceeding the regulatory limit. Time weighted average concentrations obtained using the Chemcatcher® increased over the duration of the trial corresponding to increasing stochastic inputs of metaldehyde into the catchment. Monitoring data obtained from these devices gives complementary information to that obtained by the use of infrequent spot sampling procedures. This information can be used to develop risk assessments and catchment management plans and to assess the effectiveness of any mitigation and remediation strategies.

    We also recommend Trading Suppliers and Manufacturers of Metaldehyde (cas 108-62-3). Pls Click Website Link as below: cas 108-62-3 suppliers


    Prev:Topical PerspectivesExplaining the interactions between Metaldehyde (cas 108-62-3) and acidic surface groups of activated carbon under different pH conditions
    Next: Integrated catchment management for reducing pesticide levels in water: Engaging with stakeholders in East Anglia to tackle Metaldehyde (cas 108-62-3))

About|Contact|Cas|Product Name|Molecular|Country|Encyclopedia

Message|New Cas|MSDS|Service|Advertisement|CAS DataBase|Article Data|Manufacturers | Chemical Catalog

©2008 LookChem.com,License: ICP

NO.:Zhejiang16009103

complaints:service@lookchem.com Desktop View