Encyclopedia

  • Nanocellulose production from recycled paper mill sludge using ozonation pretreatment followed by recyclable Maleic acid (cas 110-16-7) hydrolysis
  • Add time:08/24/2019         Source:sciencedirect.com

    Nanocellulose (NC) have garnered much interest worldwide due to its physical and chemical properties. Nanocellulose is produced from biomass materials by bleaching pretreatment, followed by acid hydrolysis. This work demonstrated the production of NC from recycled paper sludge (RPS), a crystalline cellulose rich waste, by ozonation pretreatment, followed by Maleic acid (cas 110-16-7) hydrolysis. Ozonation resulted in removal of lignin (as evident by TGA analysis), negative zeta potential of RPS and enhanced NC production, from 60 mg/L to over 80 mg/L after 60–120 min of ozone treatment. Maleic acid was successfully recovered, although longer ozonation times reduced the amount of acid available for recovery. These results demonstrate that ozonation can be used as an effective pretreatment for NC production.

    We also recommend Trading Suppliers and Manufacturers of Maleic acid (cas 110-16-7). Pls Click Website Link as below: cas 110-16-7 suppliers


    Prev:Chitosan‑g‑Maleic acid (cas 110-16-7) for effective removal of copper and nickel ions from their solutions
    Next: Activation of regenerated CoMo/Al2O3 hydrotreating catalysts by organic additives – The particular case of Maleic acid (cas 110-16-7))

About|Contact|Cas|Product Name|Molecular|Country|Encyclopedia

Message|New Cas|MSDS|Service|Advertisement|CAS DataBase|Article Data|Manufacturers | Chemical Catalog

©2008 LookChem.com,License: ICP

NO.:Zhejiang16009103

complaints:service@lookchem.com Desktop View