Add time:07/19/2019 Source:sciencedirect.com
This article reports and compares the performance of two new electrochemical methods for the determination of Picoxystrobin (cas 117428-22-5) (a strobilurin-class fungicide). The methods were square-wave voltammetry (SWV) and batch-injection analysis (BIA) with multiple-pulse amperometric detection, both employing boron-doped diamond (BDD) electrode, which was cathodically treated to enhance the electrochemical activity for picoxystrobin. The SWV method presented higher sensitivity with lower detection (LOD of 0.2 μmol L− 1 or 0.07 mg L− 1) and quantification limits (LOQ of 0.7 μmol L− 1 or 0.25 mg L− 1) in comparison with the BIA amperometric method (LOD of 1.6 μmol L− 1 or 0.6 mg L− 1 and LOQ of 5.3 μmol L− 1 or 2.0 mg L− 1). However, the BIA-amperometric method provided wider linear range (from 5.3 to 100.0 μmol L− 1) in comparison with the SWV method (from 0.7 to 20.0 μmol L− 1) and higher analytical frequency rate (108 measurements h− 1). Interference of other strobilurin compounds was evaluated and the presence of trifluoxystrobin and fluoxystrobin (up to 3-fold excess) affected the SWV determination of picoxystrobin. The amperometric method undergoes interference from the all of the tested strobilurins but a simple approach, based on multiple-pulse amperometry, can indicate the presence of some of the potential interfering species. Hence, either SWV or BIA-multiple pulse amperometry can be applied for picoxystrobin depending on analyte concentration, presence of interfering species, and required analytical frequency.
We also recommend Trading Suppliers and Manufacturers of Picoxystrobin (cas 117428-22-5). Pls Click Website Link as below: cas 117428-22-5 suppliers
About|Contact|Cas|Product Name|Molecular|Country|Encyclopedia
Message|New Cas|MSDS|Service|Advertisement|CAS DataBase|Article Data|Manufacturers | Chemical Catalog
©2008 LookChem.com,License: ICP
NO.:Zhejiang16009103
complaints:service@lookchem.com Desktop View