Add time:08/25/2019         Source:sciencedirect.com

This paper reports a novel bench-scale hydrometallurgical procedure and electrodeposition using potassium bis(trifluoromethyl-sulfonyl)amide (KTFSA) melts for the recovery of rare earth (RE) elements from Nd-Fe-B magnet waste. The investigations were performed at bench scale to assess the potential of a process based on leaching, deironization, and purification of RE amide salts. In the leaching process using 3.4 kg of oxidized Nd-Fe-B and 14.2 L of an aqueous solution of 1,1,1-trifluoro-N-[(trifluoromethyl)sulfonyl]methanesulfonamide (HTFSA), 83.0% Nd and 0.98% Fe were leached in 13 h, indicating that selective leaching of RE elements was performed at bench scale. Then, KOH or oxidized Nd-Fe-B was used as a precipitation agent in the deironization process and 100.0% Fe was successfully separated from RE components. Moreover, 4.07 kg of purified amide salts (M(TFSA)3, M = Pr, Nd, Dy, B, Al, and trace elements) were recovered from a spray dryer.The electrochemical behavior of Nd(III) in KTFSA melts containing M(TFSA)3 (molar fraction of RE components: xRE = 0.1) was investigated in this study. Electrochemical analysis revealed that the reduction peak of Nd(III) at around +1.0 V vs. K/K+ was due to the following reaction: Nd(III) + 3e− → Nd(0). The diffusion coefficient of Nd(III) was estimated to be 3.14 × 10−10 m2 s−1 at 483 K by semi-differential analysis, which is similar to that of Nd(III) in KTFSA melts containing pure Nd(TFSA)3 salts (xNd = 0.1). The electrodeposition of Nd was performed under potentiostatic conditions of +0.8 V vs. K/K+ at 483 K. The electrodeposits had a fine surface morphology with small metal particles. The electrodeposits were confirmed to be Nd metal in the middle layer analyzed by scanning electron microscopy/energy-dispersive X-ray spectroscopy, X-ray photoelectron spectroscopy, and X-ray diffraction. Finally, we demonstrated the effectiveness of the novel recovery process for practical use by estimating whole material flow.

We also recommend Trading Suppliers and Manufacturers of potassium amide (cas 17242-52-3). Pls Click Website Link as below: cas 17242-52-3 suppliers