Add time:08/29/2019         Source:sciencedirect.com

An amorphous SODIUM TITANATE (cas 120-34-3) (ST) nano-particle was prepared via the facile hydrolytic process with the addition of sodium hydroxide and firstly used for ammonia nitrogen (NH3-N) removal from wastewater. ST exhibited satisfactory adsorption efficiency for NH3-N simulative wastewater (20 mg·L−1) at a wide range of pH 3.0–9.0, within a minimum contact time of 10 min. The Langmuir isotherm showed that the maximum adsorption capacity (298 K) of the adsorbent was reach up to 44.54 mg·g−1. Concentrated competing cations had some interferences with NH3-N adsorption at the order of Ca2+ > K+ > Mg2+ > Na+ according to their competition on adsorption sites. During the adsorption process, cation exchange between Na+ and NH4+ played a powerful role for the NH3-N removal and the contribution of Ti-OH groups was also involved in the adsorption. The regeneration test showed that the saturated adsorbents could be conveniently regenerated just by NaOH or NaCl solution treatment and there was no obvious decline of the adsorption capacity after reused for five times. The facile method of fabrication and regeneration, the rapid adsorption process and the satisfactory adsorption efficiency make sodium titanate a promising adsorbent for low concentration NH3-N minimization.

We also recommend Trading Suppliers and Manufacturers of SODIUM TITANATE (cas 120-34-3). Pls Click Website Link as below: cas 120-34-3 suppliers