Add time:10/01/2019         Source:sciencedirect.com

A method for the determination of chlorfenvinphos, ethion and linuron in liver samples by LC-MS/MS is described. Sample treatment was performed by using Sola™ polymeric reverse phase SPE cartridges after protein precipitation. Gradient elution using 10 mM ammonium formate in methanol (A) and 10 mM ammonium formate in water (B) was used for chromatographic separation of analytes on a Hypersil™ end-capped Gold PFP reverse phase column (100 mm × 2.1 mm, 3 μm). All analytes were quantified without interference, in positive ionization mode using multiple reaction monitoring (MRM) with chlorfenvinphos-d10 as internal standard. The whole procedure was validated according to the FDA guidelines for bioanalytical methods. The calibration curves for chlorfenvinphos, linuron and ethion compounds were linear over the concentration range of 0.005–2 μM (i.e. 0.0018–0.720 μg/mL, 0.0019–0.770 μg/mL and 0.0012–0.500 μg/mL respectively) with coefficients of determination higher than 0.998. A Lower limit of quantification of 0.005 μM was achieved for all analytes, i.e. 5.76, 6.08 and 3.84 μg/kg of liver for chlorfenvinphos, ethion and linuron respectively. Compounds extraction recovery rates ranged from 92.9 to 99.5% with a RSD of 2.3%. Intra- and inter-day accuracies were within 90.9 and 100%, and imprecision varied from 0.8 to 8.2%. Stability tests proved all analytes were stable in liver extracts during instrumental analysis (+12 °C in autosampler tray for 72 h) at the end of three successive freeze-thaw cycles and at −20 °C for up to 9 months. This accurate and robust analytical method is therefore suitable for contamination or metabolism studies.

We also recommend Trading Suppliers and Manufacturers of CHLORFENVINPHOS (cas 18708-86-6). Pls Click Website Link as below: cas 18708-86-6 suppliers