Encyclopedia

  • Selective liquid-phase hydrogenation of fructose to d-mannitol over copper-supported metallic nanoparticles
  • Add time:09/24/2019         Source:sciencedirect.com

    The selective liquid-phase hydrogenation of d-fructose was studied on Cu-based catalyst, using an ethanol-water (70:30) mixture as solvent. The catalysts were prepared by three different methods: incipient wetness impregnation (Cu/SiO2-I and Cu/Al2O3-I), precipitation–deposition (Cu/SiO2-PD) and co-precipitation (CuMgAl and CuZnAl). After the thermal treatment, the samples were characterized by X-ray diffraction (XRD) and temperature-programmed reduction (TPR). Only a tenorite-like polycrystalline phase, formed by large CuO crystallites, was identified in Cu/SiO2-I, while none crystalline phase was observed in the case of Cu/SiO2-PD. Instead, a unique spinel-like phase was detected with Cu/Al2O3-I, CuMgAl and CuZnAl. Combining XRD and TPR results, we concluded that Cu2+ is highly dispersed in the Cu/SiO2-PD, Cu/Al2O3-I, CuMgAl and CuZnAl calcined precursors. As a consequence, after reduction in H2 flow, the metal dispersion and hydrogen chemisorption capacity of these four samples were one order higher than for Cu/SiO2-I. The catalytic tests showed that Cu/SiO2-PD was not only the most active but also the most selective and stable catalyst of these series: a D-fructose conversion of around 100% was reached after 6 h reaction, with a selectivity to d-mannitol of around 78–80%. These results show that selective hydrogenation of fructose to d-mannitol is favoured over metal Cu nanoparticles dispersed on the surface of a neutral support as SiO2. Additional catalytic tests, varying fructose initial concentration (0.028–0.220 M) and hydrogen pressure (20–40 bar), were carried out with Cu/SiO2-PD. A zero reaction order respect to D-fructose and a second reaction order respect to H2 were estimated. In addition, it was found that d-mannitol selectivity is not dependent on reactant initial concentration and hydrogen pressure.

    We also recommend Trading Suppliers and Manufacturers of Mannitol hexanitrate,wetted with not less than 40% water,or mixture of alcohol and water,by mass (cas 15825-70-4). Pls Click Website Link as below: cas 15825-70-4 suppliers


    Prev:Application of ruthenium induced cyclization for construction of strained biaryl ether macrocyclic compounds
    Next: Face-to-face fixed ferrocenes. Synthesis and properties of 2,10-diferrocenyl- and 2,5,7,10-tetraferrocenyl-1,6-methano[10]annulenes)

About|Contact|Cas|Product Name|Molecular|Country|Encyclopedia

Message|New Cas|MSDS|Service|Advertisement|CAS DataBase|Article Data|Manufacturers | Chemical Catalog

©2008 LookChem.com,License: ICP

NO.:Zhejiang16009103

complaints:service@lookchem.com Desktop View