Add time:09/29/2019         Source:infona.pl

Catalysts for O 2 reduction in acidic media were prepared from the pyrolysis of Fe acetate adsorbed on perylenetetracarboxylic dianhydride (PTCDA) in Ar:H 2 :NH 3 ambient. The amount of adsorbed Fe acetate ranged from 0 to 25600 ppm Fe nominal. Catalysts are obtained when the pyrolysis temperature is at least 800 o C, but 900 o C gives the best results. RDE analysis demonstrates that the catalytic activity increases first with the Fe content but levels off for Fe contents larger than 5000 ppm (0.5 wt% Fe). GDE measurements in a single membrane electrode assembly indicate that the polarization curve obtained with a catalyst containing 0.2 wt% Fe is similar to the one obtained for 2 wt% Pt. The prepared catalysts have been characterized by neutron activation analysis, XRD, TEM, ToF SIMS and XPS. From these characterizations, one may conclude that an oxidized state of Fe and pyridinic type nitrogen are both involved in the composition of the catalytic site for O 2 reduction obtained at high pyrolysis temperature. Pyridinic type nitrogens account for about 13 of the N1s signal detected by XPS at the surface of the catalyst. Beyond 0.5 wt% Fe, a plateau is reached in the catalytic activity because Fe in excess begins to form aggregates containing metallic and/or carbidic iron that are detectable by TEM and XRD. These aggregates have no catalytic activity for O 2 reduction.

We also recommend Trading Suppliers and Manufacturers of 3,4,9,10-Perylenetetracarboxylic dianhydride (cas 128-69-8). Pls Click Website Link as below: cas 128-69-8 suppliers