50867-57-7Relevant articles and documents
Ni-Catalyzed enantioselective reductive arylcyanation/cyclization of: N -(2-iodo-aryl) acrylamide
Dong, Kaiwu,Ren, Xinyi,Shen, Chaoren,Wang, Guangzhu
supporting information, p. 1135 - 1138 (2022/02/03)
A Ni/(S,S)-BDPP-catalyzed intramolecular Heck cyclization of N-(2-iodo-aryl) acrylamide with 2-methyl-2-phenylmalononitrile was developed to give oxindoles with good enantioselectivities. We found that utilizing such an electrophilic cyanation reagent cou
A CATALYST AND A PROCESS FOR THE PRODUCTION OF ETHYLENICALLY UNSATURATED CARBOXYLIC ACIDS OR ESTERS
-
Page/Page column 40, (2021/02/05)
The invention discloses a catalyst comprising a silica support, a modifier metal and a catalytic alkali metal. The silica support has a multimodal pore size distribution comprising a mesoporous pore size distribution having an average pore size in the range 2 to 50 nm and a pore volume of said mesopores of at least 0.1 cm3/g, and a macroporous pore size distribution having an average pore size of more than 50 nm and a pore volume of said macropores of at least 0.1 cm3/g. The level of catalytic alkali metal on the silica support is at least 2 mol%. The modifier metal is selected from Mg, B, Al, Ti, Zr and Hf. The invention also discloses a method of producing the catalyst, a method of producing an ethylenically unsaturated carboxylic acid or ester in the presence of the catalyst, and a process for preparing an ethylenically unsaturated acid or ester in the presence of the catalyst.
High-performance 3D printing UV-curable resins derived from soybean oil and gallic acid
Cheng, Jianwen,Hu, Lihong,Hu, Yun,Huang, Jia,Liu, Chengguo,Shang, Qianqian,Yu, Xixi,Zhang, Jinshuai,Zhou, Yonghong,Zhu, Guoqiang
, p. 5911 - 5923 (2021/08/23)
Developing sustainable 3D printing materials has attained intensive interest due to the rapid growth of the 3D printing industry and the concerns on depletion of fossil resources and environmental pollution. In this work, a novel biobased UV-curable oligomer (GMAESO) was firstly synthesized from epoxidized soybean oil (ESO) and gallic acid (GA) via a 'green' one pot method. The obtained biobased oligomer possessed a biobased content of 82.9%. By co-photopolymerization of the obtained oligomer with a hydroxyethyl methacrylate (HEMA) diluent, a series of UV-curable materials were prepared, and their properties as well as curing behaviors were investigated. Notably, the resulting GMAESO resins with high HEMA contents (50-60%) showed low viscosities (52-93 mPa s) and excellent thermal and mechanical properties (a Tg of 128-130 °C, Tp >430 °C, a tensile strength of 42.2-44.4 MPa, etc.) which were comparable or superior to a commercial product. Furthermore, the optimal resin (GMAESO with 50% HEMA) was used for digital light processing (DLP) 3D printing. The resin showed lower penetration depth (0.277 mm) than the commercial resin, thus different-structured objects with high resolution were successfully printed. In general, the developed bio-based UV-curable resins are very promising for application in the 3D printing industry.
