The following MSDS detailed information are provided by Shanghai Titanos Industry Co., Ltd, one specialized titanium dioxide supplier in China.

Section 1. Identification of the Substance and Manufacture

Chemical name: titanium(IV)oxide;titanium dioxide
Chemical Formula: TiO2

Section 2. Composition and Information on Ingredients

√Pure substance:Mixture
Component:Titanium Dioxide
Purity ≥90％
CAS NO 13463-67-7

Section 3: Hazards Identification

Hazards Class: Non hazardous chemical Routes of Entry：Inhalation,ingestion,skin contact.
Health damage: No changes for lungs in case of long-term breath,no contact dermatitis, no allergy
Environment harm: dust
Flammability: Non flammable solid.

Section 4: First Aid Measures

Skin Contact: Undress the clothes and wash with plenty flowing water. Get medical attention if irritation develops
Eye Contact: Check for and remove any contact lenses. In case of contact, immediately flush eyes with plenty of water for at least 15minutes. Get medical attention if irritation occurs.
Inhalation: If inhaled, remove to fresh air. If not breathing, give artificial respiration. If breathing is difficult, give oxygen. Get medical attention.
Ingestion: Do NOT induce vomiting unless directed to do so by medical personnel. Never give anything by mouth to an unconsciousperson. If large quantities of this material are swallowed, call a physician immediately. Loosen tight clothing such as a collar,tie, belt or waistband.

Section 5: Fire and Explosion Data

Flammability of the Product: Non-flammable.
Harmful combustion product: Not available.
In case of fire: Move containers form fire area if you can do it without risk. Apply cooling water to sides of containers that are exposed to flamer until well after fire is out.

Section 6: Accidental Release Measures

Small Spill: Use appropriate tools to put the spilled solid in a convenient waste disposal container. Finish cleaning by spreading water onthe contaminated surface and dispose of according to local and regional authority requirements.
Large Spill: Use a shovel to put the material into a convenient waste disposal container. Finish cleaning by spreading water on thecontaminated surface and allow to evacuate through the sanitary system. Be careful that the product is not present at aconcentration level above TLV. Check TLV on the MSDS and with local authorities.

Section 7: Handling and Storage

Precautions: Do not breathe dust. Wear suitable protective clothing. If you feel unwell, seek medical attention and show the label whenpossible. Keep away from incompatibles such as acids.
Storage: Keep container tightly closed. Keep container in a cool, well-ventilated area.

Section 8: Exposure Controls/Personal Protection

Exposure Limits: China MAC：
Exposure Limits: USSR MAC：
Monitor method: Engineering Controls: Use process enclosures, local exhaust ventilation, or other engineering controls to keep airborne levels below recommendedexposure
Respiratory system protection: Be sure to use an approved/certified respirator or equivalent
Eye protection: Wear chemical safety glasses
Body protection: Full suit.
Hand protection: Wear gloves.
Other protection: Wash the suit in time. Pay attention to personal cleaning.

Section 9: Physical and Chemical Properties

Apperance: White powder
Ph: 6.5～9.0
Relative density(Water=1): 3.9～4.3
Relative density(Water=1): No information
Heat of combustion(Kj/mol): Not available
Critical pressure(MPa): Not available
Flash point(℃): Not available
Lower Explosion Limit[%(V/V)]: Not available
Minimum ignition energy(mJ): Not available
Melting Point(℃): 1560
Boiling Point(℃): 3200±300
Saturated vapor pressure(kPa): Not available
Critical temperature(℃): Not available
Octanol-water partition coefficients: Not available
Ignition temperature(℃): Not available
Upper ower Explosion Limit[%(V/V)]: Not available
Maximum explosion pressure(MPa): Not available
Solubility: Insoluble in cold water, hydrochloric acid, nitric acid, diluted sulfuric acid, organic solvents. Soluble in hot concentrated sulfuricacid, hydrofluoric acid, alkali.
Main usage: An important raw material for white pigment, paint, coating

Section 10: Stability and Reactivity Data

Stability: The product is stable.
Polymerization: Will not occur.
Conditions of Instability: Incompatible materials
Incompatibility with various substances: Reactive with acids. Slightly reactive to reactive with metals.
Decomposition products: Not available

Section 11: Toxicological Information

Acute toxicity (LD50): Not available
LC50: Not available
Acrimony: No
Allergic: No
Mutagenicity: No
Teratogenicity: No
 

Section 12: Ecological Information

Ecological toxicology: No
Biodegradability: No
Non biodegradability: No
Other harmful effect: Not available

Section 13: Disposal Considerations

Waste property: Not available
Waste Disposal Method: Safety bury
Waste Disposal: Waste must be disposed of in accordance with state and local environmental control regulations.

Section 14: Transport Information

Hazardous goods code: Not available
UN No.: Not available
Packing mark: Not available
Packing class: Z01
Packing method: Not available
Transportation precaution: integral packaging, careful loading. During transportation, be sure no leakage, collapse, falling or damage. Consolidation with acid products are absolutely not allowed. Keep away from sunshine, rain and high temperature

Section 15: Regulatory Information

Regulatory Information:

《Regulation on the Safety Management of Hazardous Chemicals》（State Council Order No. 344）
《List of Hazardous goods 》（GB12268-2005）
《Classification and code of dangerous goods》（GB6944-2005）
《Compilation Regulation on Hazardous goods of MSDS》（GB16483-2000）
《The Classification and Marks of Common Hazardous Goods》（GB13690-92）

Section 16: Other Regulatory Information

References: Not available.
Revising information:
Other information:

The information above is believed to be accurate and represents the best information currently available to us. However, we make no warranty of merchantability or any other warranty, express or implied, with respect to such information, and we assume no liability resulting from its use. Users should make their own investigations to determine the suitability of the information for their particular purposes. In no event shall SHANGHAI TITANOS INDUSTRY CO.,LTD be liable for any claims, losses, or damages of any third party or for lost profits or any special, indirect, incidental, consequential or exemplary damages, howsoever arising, even if SHANGHAI TITANOS INDUSTRY CO.,LTD has been advised of the possibility of such damages.