information Related products Suppliers

Antimony fluoride(SbF5)

1.1

IDENTIFICATION OF THE SUBSTANCE/MIXTURE AND OF THE COMPANY/UNDERTAKING

Product identifiers

Product name

Product Number

Brand

Index-No.

CAS-No.

Antimony(V) fluoride

175129

Anonymous

051-003-00-9

7783-70-2

1.2

Relevant identified uses of the substance or mixture and uses advised against

Identified uses

Laboratory chemicals, Manufacture of substances

2.1

2.2

HAZARDS IDENTIFICATION

Classification of the substance or mixture

Classification according to Regulation (EC) No 1272/2008 [EU-GHS/CLP]

Acute toxicity, Inhalation (Category 4)

Acute toxicity, Oral (Category 4)

Chronic aquatic toxicity (Category 2)

Classification according to EU Directives 67/548/EEC or 1999/45/EC

Harmful by inhalation and if swallowed. Toxic to aquatic organisms, may cause long-term adverse effects

in the aquatic environment.

Label elements

Labelling according Regulation (EC) No 1272/2008 [CLP]

Pictogram

Signal word

Hazard statement(s)

H302

H332

H411

Precautionary statement(s)

P273

Supplemental Hazard

Statements

Warning

Harmful if swallowed.

Harmful if inhaled.

Toxic to aquatic life with long lasting effects.

Avoid release to the environment.

none

According to European Directive 67/548/EEC as amended.

Hazard symbol(s)

R-phrase(s)

R20/22

R51/53

Harmful by inhalation and if swallowed.

Toxic to aquatic organisms, may cause long-term adverse effects in the

aquatic environment.

S-phrase(s)

S61

Avoid release to the environment. Refer to special instructions/ Safety

data sheets.

2.3

3.1

Other hazards - none

COMPOSITION/INFORMATION ON INGREDIENTS

Substances

Synonyms

Formula

Molecular Weight

Component

Antimony(V) fluoride

Antimony pentafluoride

F5Sb

216,75 g/mol

Concentration

CAS-No.

EC-No.

Index-No.

7783-70-2

232-021-8

051-003-00-9

4.1

4.2

4.3

5.1

FIRST AID MEASURES

Description of first aid measures

General advice

Consult a physician. Show this safety data sheet to the doctor in attendance.

If inhaled

If breathed in, move person into fresh air. If not breathing, give artificial respiration. Consult a physician.

In case of skin contact

Wash off with soap and plenty of water. Consult a physician.

In case of eye contact

Flush eyes with water as a precaution.

If swallowed

Never give anything by mouth to an unconscious person. Rinse mouth with water. Consult a physician.

Most important symptoms and effects, both acute and delayed

Salivation, Nausea, Abdominal pain, Vomiting, Fever, Rapid respiration, Fluoride ion can reduce serum

calcium levels possibly causing fatal hypocalcemia., Material is extremely destructive to tissue of the

mucous membranes and upper respiratory tract, eyes, and skin., spasm, inflammation and edema of the

larynx, spasm, inflammation and edema of the bronchi, pneumonitis, pulmonary edema, burning sensation

Indication of any immediate medical attention and special treatment needed

no data available

FIREFIGHTING MEASURES

Extinguishing media

Suitable extinguishing media

Use water spray, alcohol-resistant foam, dry chemical or carbon dioxide.

5.2

5.3

5.4

6.1

6.2

6.3

6.4

7.1

7.2

7.3

8.1

8.2

Special hazards arising from the substance or mixture

Hydrogen fluoride, Antimony oxide

Advice for firefighters

Wear self contained breathing apparatus for fire fighting if necessary.

Further information

no data available

ACCIDENTAL RELEASE MEASURES

Personal precautions, protective equipment and emergency procedures

Use personal protective equipment. Avoid breathing vapors, mist or gas. Ensure adequate ventilation.

Environmental precautions

Prevent further leakage or spillage if safe to do so. Do not let product enter drains. Discharge into the

environment must be avoided.

Methods and materials for containment and cleaning up

Soak up with inert absorbent material and dispose of as hazardous waste. Keep in suitable, closed

containers for disposal.

Reference to other sections

For disposal see section 13.

HANDLING AND STORAGE

Precautions for safe handling

Avoid contact with skin and eyes. Avoid inhalation of vapour or mist.

Conditions for safe storage, including any incompatibilities

Store in cool place. Keep container tightly closed in a dry and well-ventilated place. Containers which are

opened must be carefully resealed and kept upright to prevent leakage.

Reacts violently with water.

Specific end uses

no data available

EXPOSURE CONTROLS/PERSONAL PROTECTION

Control parameters

Components with workplace control parameters

Exposure controls

Appropriate engineering controls

Handle in accordance with good industrial hygiene and safety practice. Wash hands before breaks and

at the end of workday.

Personal protective equipment

Eye/face protection

Face shield and safety glasses Use equipment for eye protection tested and approved under

appropriate government standards such as NIOSH (US) or EN 166(EU).

Skin protection

Handle with gloves. Gloves must be inspected prior to use. Use proper glove removal technique

(without touching glove's outer surface) to avoid skin contact with this product. Dispose of

contaminated gloves after use in accordance with applicable laws and good laboratory practices.

Wash and dry hands.

The selected protective gloves have to satisfy the specifications of EU Directive 89/686/EEC and

the standard EN 374 derived from it.

Body Protection

Complete suit protecting against chemicals, The type of protective equipment must be selected

according to the concentration and amount of the dangerous substance at the specific workplace.

Respiratory protection

Where risk assessment shows air-purifying respirators are appropriate use a full-face respirator

with multi-purpose combination (US) or type ABEK (EN 14387) respirator cartridges as a backup

to engineering controls. If the respirator is the sole means of protection, use a full-face supplied air

respirator. Use respirators and components tested and approved under appropriate government

standards such as NIOSH (US) or CEN (EU).

9.1

PHYSICAL AND CHEMICAL PROPERTIES

Information on basic physical and chemical properties

Appearance

Odour

Odour Threshold

Melting point/freezing

point

Initial boiling point and

boiling range

Flash point

Evaporation rate

Form: liquid

Colour: colourless

no data available

Melting point/range: 7 °C - lit.

148 - 150 °C - lit.

not applicable

no data available

Flammability (solid, gas) no data available

Upper/lower

flammability or

explosive limits

Vapour pressure

Vapour density

no data available

13 hPa at 25 °C

7,48 - (Air = 1.0)

m) Relative density

2,993 g/cm3 at 25 °C

Water solubility

Partition coefficient: n-

octanol/water

Autoignition

temperature

Decomposition

temperature

Viscosity

Explosive properties

Oxidizing properties

no data available

9.2

10.

10.1

10.2

10.3

Other safety information

no data available

STABILITY AND REACTIVITY

Reactivity

no data available

Chemical stability

no data available

Possibility of hazardous reactions

no data available

10.4

10.5

10.6

11.

11.1

Conditions to avoid

Do not allow water to enter container because of violent reaction.

Incompatible materials

Strong oxidizing agentsStrong bases, Water, Highly toxic fumes

Hazardous decomposition products

Other decomposition products - no data available

TOXICOLOGICAL INFORMATION

Information on toxicological effects

Acute toxicity

no data available

Skin corrosion/irritation

no data available

Serious eye damage/eye irritation

no data available

Respiratory or skin sensitization

no data available

Germ cell mutagenicity

no data available

Carcinogenicity

IARC:

No component of this product present at levels greater than or equal to 0.1% is identified as

probable, possible or confirmed human carcinogen by IARC.

Reproductive toxicity

no data available

Specific target organ toxicity - single exposure

no data available

Specific target organ toxicity - repeated exposure

no data available

Aspiration hazard

no data available

Potential health effects

Inhalation

Ingestion

Skin

Eyes

Harmful if inhaled. May cause respiratory tract irritation.

Harmful if swallowed.

May be harmful if absorbed through skin. May cause skin irritation.

May cause eye irritation.

Signs and Symptoms of Exposure

Salivation, Nausea, Abdominal pain, Vomiting, Fever, Rapid respiration, Fluoride ion can reduce serum

calcium levels possibly causing fatal hypocalcemia., Material is extremely destructive to tissue of the

mucous membranes and upper respiratory tract, eyes, and skin., spasm, inflammation and edema of the

larynx, spasm, inflammation and edema of the bronchi, pneumonitis, pulmonary edema, burning sensation

Additional Information

RTECS: Not available

12.

12.1

12.2

12.3

ECOLOGICAL INFORMATION

Toxicity

no data available

Persistence and degradability

no data available

Bioaccumulative potential

no data available

12.4

12.5

12.6

13.

13.1

14.

14.1

Mobility in soil

no data available

Results of PBT and vPvB assessment

no data available

Other adverse effects

Toxic to aquatic life with long lasting effects.

DISPOSAL CONSIDERATIONS

Waste treatment methods

Product

Offer surplus and non-recyclable solutions to a licensed disposal company.

Contaminated packaging

Dispose of as unused product.

TRANSPORT INFORMATION

UN number

14.2

ADR/RID: 1732

UN proper shipping name

IMDG: 1732

IATA: 1732

ADR/RID:

IMDG:

IATA:

ANTIMONY PENTAFLUORIDE

Antimony pentafluoride

Passenger Aircraft: Not permitted for transport

14.3

Transport hazard class(es)

14.4

14.5

14.6

15.

ADR/RID: 8 (6.1)

Packaging group

ADR/RID: II

Environmental hazards

ADR/RID: yes

Special precautions for user

no data available

REGULATORY INFORMATION

IMDG: 8 (6.1)

IMDG: II

IMDG Marine pollutant: yes

IATA: 8 (6.1)

IATA: II

IATA: no

This safety datasheet complies with the requirements of Regulation (EC) No. 1907/2006.

15.1

15.2

16.

Safety, health and environmental regulations/legislation specific for the substance or mixture

no data available

Chemical Safety Assessment

no data available

OTHER INFORMATION

Further information

The above information is believed to be correct but does not purport to be all inclusive and
shall be used only as a guide. The information this document is based on the resent state
of our knowledge and is applicable to the product with regard to appropriate safety precautions.
It does not represent any guarantee of the properties of the product. Lookchem shall not be
held liable for any damage resulting from handling or from contact with the above product.
See reverse side of invoice or packing slip for additional terms and conditions of sale.

;