information Related products Suppliers

Oxirane,2,2'-[oxybis[(methyl-2,1-ethanediyl)oxymethylene]]bis-

MATERIAL SAFETY DATA SHEET

SIKADUR DOT-SP2 - PART A

HMIS
HEALTH 2
FLAMMABILITY 0
REACTIVITY 0
C
PERSONAL PROTECTION

1. Product And Company Identification
Supplier Manufacturer
SIKA CORPORATION SIKA CORPORATION
201 Polito Ave 201 Polito Ave
Lyndhurst, NJ 07071 Lyndhurst, NJ 07071
Company Contact: Kristin Kelley Company Contact: Kristin Kelley
Telephone Number: (201) 933-8800 Telephone Number: (201) 933-8800
FAX Number: (201) 933-9379 FAX Number: (201) 933-9379
Web Site: www.sikausa.com Web Site: www.sikausa.com

Supplier Emergency Contacts & Phone Number Manufacturer Emergency Contacts & Phone Number
CHEMTREC: 800-424-9300 CHEMTREC: 800-424-9300
INTERNATIONAL: 703-527-3887 INTERNATIONAL: 703-527-3887

Issue Date: 11/12/2001
Product Name: SIKADUR DOT-SP2 - PART A
CAS Number: Not Established
Chemical Family: EPOXY COMPOUN Chemical Formula: RMF-1277
MSDS Number: 823
Product Code: NO. 321 H

2. Composition/Information On Ingredients

Ingredient CAS Percent Of
Name Number Total Weight
AROMATIC HYDROCARBON 64741-67-9
BENZYL ALCOHOL 100-51-6
EPICHLOROHYDRIN-POLYGLYCOL REACTION PRODUCTS 41638-13-5
EPOXY RESIN EPICHLOROHYDRIN/BISPHENOL A BASE 25068-38-6

3. Hazards Identification
Eye Hazards
EYE IRRITANT.
Skin Hazards
MAY CAUSE A REVERSIBLE INFLAMMATORY EFFECT ON SKIN OR TISSUE AT THE SITE OF CONTACT.
CAUSES AN ALLERGIC SENSITIZATION IN A SUBSTANTIAL PROPORTION OF HUMANS OR ANIMALS IN
NORMAL TISSUE AFTER REPEATED EXPOSURES.
MATERIAL SAFETY DATA SHEET
SIKADUR DOT-SP2 - PART A

3. Hazards Identification - Continued
Ingestion Hazards
NOT NORMALLY INGESTED.
Inhalation Hazards
MAY CAUSE A REVERSIBLE INFLAMMATORY EFFECT ON THE UPPER RESPIRATORY SYSTEM.

4. First Aid Measures
Eye
RINSE EYES THOROUGHLY WITH WATER FOR AT LEAST 15 MINUTES. CONSULT PHYSICIAN.
Skin
WASH SKIN THOROUGHLY WITH SOAP AND WATER. REMOVE CONTAMINATED CLOTHING.IF
SYMPTOMS PERSIST CONSULT PHYSICIAN.
Ingestion
DILUTE WITH WATER, CONSULT PHYSICIAN.
Inhalation
REMOVE TO FRESH AIR. IF BREATHING HAS STOPPED, INSTITUTE ARTIFICIAL RESPIRATION. CONSULT
WITH PHYSICIAN.

5. Fire Fighting Measures
Flash Point: >200 ??F
Autoignition Point: N/AV ??F
Flammability Class: NCMB
Lower Explosive Limit: N/AV
Upper Explosive Limit: N/AV
Fire And Explosion Hazards
NONE KNOWN
Extinguishing Media
In case of fire, use water spray (fog) foam, dry chemical, or CO2.

Fire Fighting Instructions
Firefighters should wear self-contained breathing apparatus and full protective gear.

6. Accidental Release Measures
WEAR SUITABLE PROTECTIVE EQUIPMENT. CONTAIN SPILL AND COLLECT WITH ABSORBENT MATERIAL AN TRANSFER INTO SUITABALE CONTAINERS. AVOID CONTACT.

7. Handling And Storage
Handling And Storage Precautions
STORE IN A COOL, DRY AREA AWAY FROM SPARKS AND OPEN FLAME. KEEP CONTAINERS TIGHTLY
CLOSED.
Work/Hygienic Practices
Wash thoroughly with soap and water after handling.

8. Exposure Controls/Personal Protection
Engineering Controls
Use with adequate general and local exhaust ventilation.
MATERIAL SAFETY DATA SHEET
SIKADUR DOT-SP2 - PART A

8. Exposure Controls/Personal Protection - Continued
Eye/Face Protection
Safety glasses with side shields or goggles.

Skin Protection
AVOID SKIN CONTACT. WEAR LONG SLEEVE SHIRT AND LONG PANTS. CHEMICAL RESISTANT RUBBE OR PLASTIC GLOVES.
Respiratory Protection
In areas where the P.E.L.s are exceeded, use a properly fitted NIOSH-approved respirator.

Ingredient(s) - Exposure Limits
EPICHLOROHYDRIN-POLYGLYCOL REACTION PRODUCTS
ACGIH N/E
OSHA N/E
NTP N/AP
IARC N/AP
EPOXY RESIN EPICHLOROHYDRIN/BISPHENOL A BASE
ACGIH N/E
OSHA N/E
NTP N/AP
IARC N/AP

9. Physical And Chemical Properties
Appearance
STRAW COLORED LIQUI Odor
MILD AROMATIC
Chemical Type: Mixture
Physical State: Liquid
Melting Point: N/AV ??F
Boiling Point: N/AV ??F
Specific Gravity: 1.14
Percent Volatiles: N/AV
Packing Density: 9.51#/GAL
Vapor Pressure: N/AV
Vapor Density: N/AV
Solubility: N/AV
Evaporation Rate: SLOWER THAN ETHE
10. Stability And Reactivity
Stability: STABLE
Hazardous Polymerization: WILL NOT OCCU Conditions To Avoid (Stability)
NONE KNOWN
Incompatible Materials
STRONG ACIDS AND OXIDIZING AGENTS
Hazardous Decomposition Products
CO, CO2, ALDEHYDES, NITROGEN OXIDES
MATERIAL SAFETY DATA SHEET
SIKADUR DOT-SP2 - PART A

10. Stability And Reactivity - Continued
Conditions To Avoid (Polymerization)
EXOTHERM WHEN CURING IN MASS

11. Toxicological Information
Conditions Aggravated By Exposure
ASTHMA TYPE CONDITIONS, CHRONIC BRONCHITIS AND OTHER CHRONIC RESPIRATORY
CONDITIONS. RECURRENT SKIN ECZEMA. PRESENSITIZATION TO PRODUCT.

12. Ecological Information
Other Environmental Information

13. Disposal Considerations
Dispose in accordance with applicable federal, state and local government regulations.

14. Transport Information
Proper Shipping Name
NOT REGULATED PER D.O.T.

15. Regulatory Information
U.S. Regulatory Information
All ingredients of this product are listed or are excluded from listing under the U.S. Toxic Substances Control Act
(TSCA) Chemical Substance Inventory.

SARA Hazard Classes
Acute Health Hazard
Chronic Health Hazard
SARA Section 313 Notification
This product does not contain any ingredients regulated under Section 313 of the Emergency Planning and
Community Right-To-Know Act of 1986 or 40 CFR 372.
Ingredient(s) - State Regulations
BENZYL ALCOHOL
New Jersey - Workplace Hazard
Pennsylvania - Workplace Hazard
Massachusetts - Hazardous Substance

16. Other Information
HMIS Rating
Health: 2
F ir e : 0
Reactivity: 0
PP E: C

Disclaimer
The data in this Material Safety Data Sheet relates only to the specific material herein and does not relate to use in
combination with any other materialor in any process. The information set forth herein is based on technical da ta
that Sika believes to be reliable as of the date hereof. Since conditions of use are outside our control, we make no
warranties, express or implied andassume no liability in connection with any use of this information. Nothing herein
MATERIAL SAFETY DATA SHEET
SIKADUR DOT-SP2 - PART A

Disclaimer - Continued
is to be taken as a license to operate under or a recommendation to infringe any patents.
SIKA CORPORATION
Printed Using MSDS Generator?? 2000

;