Styrene

1. 1.1 IDENTIFICATION OF THE SUBSTANCE/MIXTURE AND OF THE COMPANY/UNDERTAKING Product identifiers Product name Product Number Brand Index-No. CAS-No. : : : : : Styrene 240869 Anonymous 601-026-00-0 100-42-5 1.2 Relevant identified uses of the substance or mixture and uses advised against Identified uses : Laboratory chemicals, Manufacture of substances 2. 2.1 2.2 HAZARDS IDENTIFICATION Classification of the substance or mixture Classification according to Regulation (EC) No 1272/2008 [EU-GHS/CLP] Eye irritation (Category 2) Flammable liquids (Category 3) Acute toxicity, Inhalation (Category 4) Skin irritation (Category 2) Classification according to EU Directives 67/548/EEC or 1999/45/EC Flammable. Harmful by inhalation. Irritating to eyes and skin. Label elements Labelling according Regulation (EC) No 1272/2008 [CLP] Pictogram Signal word Hazard statement(s) H226 H315 H319 H332 Precautionary statement(s) P305 + P351 + P338 Warning Flammable liquid and vapour. Causes skin irritation. Causes serious eye irritation. Harmful if inhaled. IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. Supplemental Hazard none Statements According to European Directive 67/548/EEC as amended. Hazard symbol(s) R-phrase(s) R10 R20 R36/38 S-phrase(s) S23 Flammable. Harmful by inhalation. Irritating to eyes and skin. Do not breathe gas/fumes/vapour/spray. 2.3 3. 3.1 Other hazards Lachrymator. COMPOSITION/INFORMATION ON INGREDIENTS Substances Synonyms Formula Molecular Weight Component Styrene : : : Phenylethylene Vinylbenzene C8H8 C8H8 104,15 g/mol Concentration CAS-No. EC-No. Index-No. 100-42-5 202-851-5 601-026-00-0 - 4. 4.1 4.2 4.3 5. 5.1 FIRST AID MEASURES Description of first aid measures General advice Consult a physician. Show this safety data sheet to the doctor in attendance. If inhaled If breathed in, move person into fresh air. If not breathing, give artificial respiration. Consult a physician. In case of skin contact Wash off with soap and plenty of water. Consult a physician. In case of eye contact Rinse thoroughly with plenty of water for at least 15 minutes and consult a physician. If swallowed Do NOT induce vomiting. Never give anything by mouth to an unconscious person. Rinse mouth with water. Consult a physician. Most important symptoms and effects, both acute and delayed Dermatitis, Central nervous system depression, Nausea, Dizziness, Headache Indication of any immediate medical attention and special treatment needed no data available FIREFIGHTING MEASURES Extinguishing media Suitable extinguishing media Use water spray, alcohol-resistant foam, dry chemical or carbon dioxide. 5.2 5.3 5.4 6. 6.1 6.2 6.3 6.4 7. 7.1 7.2 7.3 8. 8.1 8.2 Special hazards arising from the substance or mixture Carbon oxides Advice for firefighters Wear self contained breathing apparatus for fire fighting if necessary. Further information Use water spray to cool unopened containers. ACCIDENTAL RELEASE MEASURES Personal precautions, protective equipment and emergency procedures Use personal protective equipment. Avoid breathing vapors, mist or gas. Ensure adequate ventilation. Remove all sources of ignition. Beware of vapours accumulating to form explosive concentrations. Vapours can accumulate in low areas. Environmental precautions Prevent further leakage or spillage if safe to do so. Do not let product enter drains. Discharge into the environment must be avoided. Methods and materials for containment and cleaning up Contain spillage, and then collect with an electrically protected vacuum cleaner or by wet-brushing and place in container for disposal according to local regulations (see section 13). Reference to other sections For disposal see section 13. HANDLING AND STORAGE Precautions for safe handling Avoid contact with skin and eyes. Avoid inhalation of vapour or mist. Keep away from sources of ignition - No smoking.Take measures to prevent the build up of electrostatic charge. Conditions for safe storage, including any incompatibilities Store in cool place. Keep container tightly closed in a dry and well-ventilated place. Containers which are opened must be carefully resealed and kept upright to prevent leakage. Recommended storage temperature: 2 - 8 °C Light sensitive. Specific end uses no data available EXPOSURE CONTROLS/PERSONAL PROTECTION Control parameters Components with workplace control parameters Exposure controls Appropriate engineering controls Handle in accordance with good industrial hygiene and safety practice. Wash hands before breaks and at the end of workday. Personal protective equipment Eye/face protection Face shield and safety glasses Use equipment for eye protection tested and approved under appropriate government standards such as NIOSH (US) or EN 166(EU). Skin protection Handle with gloves. Gloves must be inspected prior to use. Use proper glove removal technique (without touching glove's outer surface) to avoid skin contact with this product. Dispose of contaminated gloves after use in accordance with applicable laws and good laboratory practices. Wash and dry hands. The selected protective gloves have to satisfy the specifications of EU Directive 89/686/EEC and the standard EN 374 derived from it. Immersion protection Material: Fluorinated rubber Minimum layer thickness: 0,7 mm Break through time: > 480 min Material tested:Vitoject? (Anonymous Z677698, Size M) Splash protection Material: Nitrile rubber Minimum layer thickness: 0,4 mm Break through time: > 30 min Material tested:Camatril? (Anonymous Z677442, Size M) data source: KCL GmbH, D-36124 Eichenzell, phone +49 (0)6659 873000, e-mail sales@kcl.de, test method: EN374 If used in solution, or mixed with other substances, and under conditions which differ from EN 374, contact the supplier of the CE approved gloves. This recommendation is advisory only and must be evaluated by an Industrial Hygienist familiar with the specific situation of anticipated use by our customers. It should not be construed as offering an approval for any specific use scenario. Body Protection Complete suit protecting against chemicals, Flame retardant antistatic protective clothing, The type of protective equipment must be selected according to the concentration and amount of the dangerous substance at the specific workplace. Respiratory protection Where risk assessment shows air-purifying respirators are appropriate use a full-face respirator with multi-purpose combination (US) or type ABEK (EN 14387) respirator cartridges as a backup to engineering controls. If the respirator is the sole means of protection, use a full-face supplied air respirator. Use respirators and components tested and approved under appropriate government standards such as NIOSH (US) or CEN (EU). 9. 9.1 PHYSICAL AND CHEMICAL PROPERTIES Information on basic physical and chemical properties a) b) c) d) e) f) g) h) Appearance Odour Odour Threshold pH Melting point/freezing point Initial boiling point and boiling range Flash point Evaporation rate Form: liquid, clear Colour: colourless no data available no data available no data available Melting point/range: -31 °C - lit. 145 - 146 °C - lit. 32,0 °C - closed cup no data available i) Flammability (solid, gas) no data available j) k) l) Upper/lower flammability or explosive limits Vapour pressure Vapour density Upper explosion limit: 8,9 %(V) Lower explosion limit: 1,1 %(V) 16,5 hPa at 37,7 °C 5,7 hPa at 15,0 °C no data available m) Relative density 0,906 g/cm3 at 25 °C n) Water solubility insoluble o) p) q) r) s) t) Partition coefficient: n- octanol/water Autoignition temperature Decomposition temperature Viscosity Explosive properties Oxidizing properties no data available 490,0 °C480,0 °C no data available no data available no data available no data available 9.2 10. 10.1 10.2 10.3 10.4 10.5 10.6 11. 11.1 Other safety information no data available STABILITY AND REACTIVITY Reactivity no data available Chemical stability no data available Possibility of hazardous reactions no data available Conditions to avoid May polymerize on exposure to light. Heat, flames and sparks. Incompatible materials Oxidizing agents, Copper Hazardous decomposition products Other decomposition products - no data available TOXICOLOGICAL INFORMATION Information on toxicological effects Acute toxicity LD50 Oral - rat - 2.650 mg/kg Remarks: Behavioral:Somnolence (general depressed activity). Liver:Other changes. LC50 Inhalation - rat - 4 h - 12.000 mg/m3 Skin corrosion/irritation Skin - rabbit - Skin irritation Serious eye damage/eye irritation Eyes - rabbit - Eye irritation - 24 h Respiratory or skin sensitization no data available Germ cell mutagenicity Laboratory experiments have shown mutagenic effects. Carcinogenicity This product is or contains a component that has been reported to be possibly carcinogenic based on its IARC, ACGIH, NTP, or EPA classification. IARC: 2B - Group 2B: Possibly carcinogenic to humans (Styrene) Reproductive toxicity no data available Specific target organ toxicity - single exposure no data available Specific target organ toxicity - repeated exposure no data available Aspiration hazard no data available Potential health effects Inhalation Ingestion Skin Eyes Harmful if inhaled. Causes respiratory tract irritation. May be harmful if swallowed. May be harmful if absorbed through skin. Causes skin irritation. Causes serious eye irritation. Signs and Symptoms of Exposure Dermatitis, Central nervous system depression, Nausea, Dizziness, Headache Additional Information RTECS: WL3675000 12. 12.1 ECOLOGICAL INFORMATION Toxicity Toxicity to fish Toxicity to daphnia and LC50 - Leuciscus idus (Golden orfe) - 17,00 - 66,00 mg/l - 48 h NOEC - Pimephales promelas (fathead minnow) - 4 mg/l - 96 h LC50 - Pimephales promelas (fathead minnow) - 4,08 mg/l - 96 h LOEC - Pimephales promelas (fathead minnow) - 7,6 mg/l - 96 h EC50 - Daphnia magna (Water flea) - 182,00 mg/l - 24 h other aquatic invertebrates NOEC - Daphnia magna (Water flea) - 1,9 mg/l - 48 h LOEC - Daphnia magna (Water flea) - 3,3 mg/l - 48 h EC50 - Daphnia magna (Water flea) - 4,7 mg/l - 48 h 12.2 Persistence and degradability Biodegradability aerobic - Exposure time 28 d Result: > 60 % - Readily biodegradable. 12.3 12.4 12.5 12.6 13. 13.1 Bioaccumulative potential no data available Mobility in soil no data available Results of PBT and vPvB assessment no data available Other adverse effects Toxic to aquatic life. no data available DISPOSAL CONSIDERATIONS Waste treatment methods Product Burn in a chemical incinerator equipped with an afterburner and scrubber but exert extra care in igniting as this material is highly flammable. Offer surplus and non-recyclable solutions to a licensed disposal company. Contaminated packaging Dispose of as unused product. 14. 14.1 TRANSPORT INFORMATION UN number 14.2 ADR/RID: 2055 UN proper shipping name IMDG: 2055 IATA: 2055 ADR/RID: IMDG: IATA: STYRENE MONOMER, STABILIZED STYRENE MONOMER, STABILIZED Styrene monomer, stabilized 14.3 Transport hazard class(es) 14.4 14.5 14.6 15. ADR/RID: 3 Packaging group ADR/RID: III Environmental hazards ADR/RID: no Special precautions for user no data available REGULATORY INFORMATION IMDG: 3 IMDG: III IMDG Marine pollutant: no IATA: 3 IATA: III IATA: no This safety datasheet complies with the requirements of Regulation (EC) No. 1907/2006. 15.1 15.2 16. Safety, health and environmental regulations/legislation specific for the substance or mixture no data available Chemical Safety Assessment no data available OTHER INFORMATION Further information The above information is believed to be correct but does not purport to be all inclusive and shall be used only as a guide. The information this document is based on the resent state of our knowledge and is applicable to the product with regard to appropriate safety precautions. It does not represent any guarantee of the properties of the product. Lookchem shall not be held liable for any damage resulting from handling or from contact with the above product. See reverse side of invoice or packing slip for additional terms and conditions of sale.

Related Product

• 10042-50-9
• 1004254-22-1
• 10042-59-8
• 10042-65-6
• 10042-66-7
• 10042-67-8
• 100427-04-1
• 10042-71-4
• 100427-26-7
• 100427-27-8
• 10042-76-9
• 10042-77-0

Recommended suppliers