N-(2-chlorethyl)morpholine
2-(morpholin-4-yl)ethanol
2,2'-dimorpholinodiethyl ether
Conditions | Yield |
---|---|
With sodium hydroxide; adogen 464 In tetrahydrofuran for 6h; Heating; | 84% |
With sodium |
triethanolamine hydrochloride
A
morpholine
B
2-(morpholin-4-yl)ethanol
C
1,2-dimorpholylethane
D
2,2'-dimorpholinodiethyl ether
Conditions | Yield |
---|---|
at 190 - 230℃; |
Conditions | Yield |
---|---|
at 200 - 230℃; |
N-(2-chlorethyl)morpholine
4-(2-hydroxypropyl)morpholine
A
2,2'-dimorpholinodiethyl ether
Conditions | Yield |
---|---|
With sodium hydroxide; adogen 464 In tetrahydrofuran for 6h; Heating; Yield given. Yields of byproduct given. Title compound not separated from byproducts; |
Conditions | Yield |
---|---|
Multi-step reaction with 2 steps 1: SOCl2 / 2 h / Heating 2: 50percent NaOH / Adogen 464 / tetrahydrofuran / 6 h / Heating View Scheme | |
Multi-step reaction with 2 steps 1: SOCl2 / 2 h / Heating 2: 84 percent / 50percent NaOH / Adogen 464 / tetrahydrofuran / 6 h / Heating View Scheme | |
With sulfuric acid at 130 - 200℃; for 15h; |
Conditions | Yield |
---|---|
With hydrogen; γ-Al2O3 (45 weight %), CuO (55 weight %), hydrogenated at 210℃; under 12001.2 Torr; Product distribution / selectivity; |
Conditions | Yield |
---|---|
Multi-step reaction with 2 steps 1: sulfuric acid / 15 h / 130 - 200 °C 2: sulfuric acid / 15 h / 130 - 200 °C View Scheme |
triethanolamine
A
2-(morpholin-4-yl)ethanol
B
2,2'-dimorpholinodiethyl ether
Conditions | Yield |
---|---|
With sulfuric acid at 130 - 200℃; for 15h; Temperature; Time; |
2,2'-dimorpholinodiethyl ether
pentafluorophenyl ester of quinaldic acid
morpholino(quinolin-2-yl)methanone
Conditions | Yield |
---|---|
With palladium diacetate In chlorobenzene at 115℃; for 24h; | 69% |
2,2'-dimorpholinodiethyl ether
C12F24N2O3
Conditions | Yield |
---|---|
With hydrogen fluoride In water at 50℃; under 1551.4 Torr; for 233h; average voltage of electrochemical cell = 5.8 volts; 20 amps; | 44% |
Product Name: 2,2-Dimorpholinodiethylether (CAS NO.6425-39-4)
Molecular Formula: C12H24N2O3
Molecular Weight: 244.33g/mol
EINECS: 229-194-7
Boiling point: 309 °C(lit.)
Density: 1.06 g/mL at 25 °C(lit.)
Refractive index: n20/D 1.484(lit.)
Flash point: 295 °F
Index of Refraction: 1.481
Molar Refractivity: 65.58 cm3
Molar Volume: 230 cm3
Polarizability: 26 10-24cm3
Surface Tension: 36.4 dyne/cm
Enthalpy of Vaporization: 57.68 kJ/mol
Vapour Pressure: 0.000132 mmHg at 25°C
Structure Descriptors of 2,2-Dimorpholinodiethylether (CAS NO.6425-39-4):
IUPAC Name: 4-[2-(2-morpholin-4-ylethoxy)ethyl]morpholine
Canonical SMILES: C1COCCN1CCOCCN2CCOCC2
InChI: InChI=1S/C12H24N2O3/c1-7-15-8-2-13(1)5-11-17-12-6-14-3-9-16-10-4-14/h1-12H2
InChIKey: ZMSQJSMSLXVTKN-UHFFFAOYSA-N
Product Categories: Organics; Polymer Additives; Polymer Science; Polymerization and Polymer Property Modifiers
2,2-Dimorpholinodiethylether (CAS NO.6425-39-4) is mainly used in one-component and two-component rigid sealing system,like semi-soft foam.
Safety Information of 2,2-Dimorpholinodiethylether (CAS NO.6425-39-4):
Hazard Codes: Xi
Risk Statements: 36 (36: Irritating to the eyes)
Safety Statements: 26-36 (26: In case of contact with eyes, rinse immediately with plenty of water and seek medical advice 36: Wear suitable protective clothing)
WGK Germany: 1
2,2-Dimorpholinodiethylether , its CAS NO. is 6425-39-4, the synonyms are 4,4'-(oxydi-2,1-ethanediyl)bis-morpholin ; Dimorpholinodiethylether ; Dimorpholinodiethyl ether ; Bis(morpholinoethyl)ether ; 2,2'-Dimorpholinodiethyl ether ; 2,2'-Dimorpholinyldiethyl ether ; 4,4'-(Oxydiethylene)bis(morpholine) ; Morpholine, 4,4'-(oxydiethylene)di-,and so on.
About|Contact|Cas|Product Name|Molecular|Country|Encyclopedia
Message|New Cas|MSDS|Service|Advertisement|CAS DataBase|Article Data|Manufacturers | Chemical Catalog
©2008 LookChem.com,License: ICP
NO.:Zhejiang16009103
complaints:service@lookchem.com Desktop View