HDPE Granules HDPE Granules HDPE Granules
Injection grade
Item | Test Condition | Test Method | Value | Unit |
MFR | 190°C/2.16kg | ASTM D-1238 | 20 | g/10min |
Density | --- | ASTM D-792 | 0.954 | g/cm3 |
Tensile strength at yiled | --- | ASTM D-638 | 28 | MPa |
Elongation at break | --- | ASTM D-638 | 250 | % |
Impact tensile strength | --- | ASTM D-1822 | 42 | kJ/m2 |
ESCR | ASTM D-1693 | 3 | --- | |
VACIT | --- | ASTM D-1525 | 127 | °C |
For extrusion packaging film, rope, woven bags, fishing nets, water pipes; injection of low-end commodity and housing, non-bearing load components, plastic box, turnover box; extrusion blow molding containers, hollow products, bottles.
Property
Unit |
Typical Value |
|
Mass density | g/cm 3 | 0.941-0.959 |
Melt flow Rate(190 centidegree /2.16kg) | g/10min | ≤1.0 |
Tensile yield strength | MPa | ≥19.0 |
Flexural modulus | Mpa | ≥965 |
Elongation@ break | % | ≥400 |
Impact Embrittlement temperature | centidegree | MAX -118 |
Dielectric Constant | 100KHZ | 2.32 |
1MHZ | 2.31 | |
Loss Tangent | 100KHZ | MAX 0.0001 |
1MHZ | MAX 0.0001 | |
About|Contact|Cas|Product Name|Molecular|Country|Encyclopedia
Message|New Cas|MSDS|Service|Advertisement|CAS DataBase|Article Data|Manufacturers | Chemical Catalog
©2008 LookChem.com,License: ICP
NO.:Zhejiang16009103
complaints:service@lookchem.com Desktop View