Building Wall Spray...

Building Wall Spray Rigid Foam Blend Polyol for House System
Building Wall Spray Rigid Foam Blend Polyol for House System
Building Wall Spray Rigid Foam Blend Polyol for House System
Building Wall Spray Rigid Foam Blend Polyol for House System

Building Wall Spray Rigid Foam Blend Polyol for House System

Min.Order / FOB Price:Get Latest Price

1 Metric Ton

FOB Price: USD 1650.0000

  • Min.Order :1 Metric Ton
  • Purity: 99.9%
  • Payment Terms : L/C,T/T,

Keywords

Isocyanate house insulation Polyurethane foam

Quick Details

  • Appearance:Brown liquid
  • Application:building insulation, pipe insulation, sandwich panel,spary foam,
  • PackAge:drum
  • ProductionCapacity:1000|Metric Ton|Day
  • Storage:avoid water
  • Transportation:

Superiority:

SDA13E cold storage insulation system blend polyol is a kind of spray rigid PU foam blend polyol, specially used for the insulation of the wall of storage insulation. It used together with isocyanate(PM-200) to make rigid PU foam through PU spray machine. The foam produced has the characteristics as following:

  1. The strong adhesive force, convenient construction and no seams.
  2. The low thermal conductivity, low water absorption and good dimensional stability.
  3. The long service life.

Details:

Blend Polyol SDA13E
Spray Rigid PU Foam For Cold storage
DESCRIPTION
SDA13E cold storage insulation system blend polyol is a kind of spray rigid PU foam blend polyol, specially used for the insulation of the wall of storage insulation. It used together with isocyanate(PM-200) to make rigid PU foam through PU spray machine. The foam produced has the characteristics as following:

  1. The strong adhesive force, convenient construction and no seams.
  2. The low thermal conductivity, low water absorption and good dimensional stability.
  3. The long service life.

TYPICAL PHYSICAL PROPERTIES

Physical Properities Test Method Metric Value
Core Density GB/T 6343-2009 kg/m3 45.3
Compressive Strength GB/T 8813-2008 kPa 264
Tensile Strenght GB/T 9641-88 kPa 136
Oxygen index GB/T 2406.2-2009  % 23.4
Initial Thermal Conductivity GB/T 10294-2008 W/(m·K) 0.022
Close Cell Content GB/T 10799-2008 % ≥88
Water Absorption GB/T 8810-2005 % ≤3
Dimensional Stability
(Foam made After 6 days)		 -25ºC GB/T 8811-2008 % ≤±1
≤±1
70ºC

Importance: The above mentioned are typical test values, and the specific data may vary slightly due to environmental conditions.For our products, the data are not legally binding.

Other unmentioned matters and TDS&MSDS.Please visit our official website www.shundapu.com
Or please contact us for information:
 
Tel: +86 535 6739386.
------------------------------------------------------------------
DESCRIPTION
SD1133 cold storage insulation system blend polyol is a kind of spray rigid PU foam blend polyol, specially used for the insulation of the wall of storage insulation. It used together with isocyanate(PM-200) to make rigid PU foam through PU spray machine. The foam produced has the characteristics as following:

  1. The strong adhesive force, convenient construction and no seams.
  2. The low thermal conductivity, low water absorption and good dimensional stability.
  3. The long service life.

TYPICAL PHYSICAL PROPERTIES

Physical Properities Test Method Metric Value
Core Density GB/T 6343-2009 kg/m3 45.3
Compressive Strength GB/T 8813-2008 kPa 264
Tensile Strenght GB/T 9641-88 kPa 136
Oxygen index GB/T 2406.2-2009  % 23.4
Initial Thermal Conductivity GB/T 10294-2008 W/(m·K) 0.022
Close Cell Content GB/T 10799-2008 % ≥88
Water Absorption GB/T 8810-2005 % ≤3
Dimensional Stability
(Foam made After 6 days)		 -25ºC GB/T 8811-2008 % ≤±1
≤±1
70ºC

Importance: The above mentioned are typical test values, and the specific data may vary slightly due to environmental conditions.For our products, the data are not legally binding.
COMPONENT PRODUCT SPECIFICATIONS

Property Blend polyol 
SD1133		 Polymeric      MDI Pm200
Appearance Pale yellow liquid. Brown liquid
Specific gravity at 25°C 1.10±0.10 g/cm3 1.22-1.25 g/cm3
Viscosity at 25°C 300±100 cps 200±50 cps
Shelf life 3 months 12 months

REACTIVITY PROFILE

Cream Time Gel Time Rise Time
0-1 s 2-3 s 4-6 s


INSTALLATION GUIDELINE

SD1133 Ambient Temperatures Spraying Temperatures Minimum Spray Pressures
Summer 10-35ºC 35-41ºC 5516kPa (800 psi)
Sping~Autumn 0-15ºC 35-45ºC 5516kPa (800 psi)
Winter -10-5ºC 35-50ºC 5516kPa (800 psi)

SD1133:PM200=1:1(volume ratio)
 Foaming Machine:Polyurethane Rigid foam Spray Machine
ADDITIONAL INFORMATION

  1. Maximum per pass thickness is 35mm,Spraying thicker can result in spontaneous combustion and poor overall spray foam quality
  2. Internal temperature of installed pass must be 25ºC before installing subsequent passes Maximum thickness during 24h period is 203mm(8inches)
  3. Like most of foam product,foam made by SD1133is combustible,An thermal barrier must be installed in accordance with approved construction standards SD1133
  4. The service temperature of the foam with SD1133 is between -60~80ºC.

PACKING SPECIFICATION 
220KGS/Drum, Blue paint or Zinc coating drums (Drum Weight: 18-23kg)
STORAGE RECOMMENDATIONS  
The blend polyol should be stored in the sealed container to avoid the absorption of water vapor.  During the transportation, it should avoid serious shake and strong sunlight. It should be stored in ventilated place, avoiding light, water and fire. Recommended storage temperature is 15~25ºC.
Shelf life: 6 months, please test before using after 6 months storage.

View All
Visit Store

You Might Also Like

Related Searches

Contact Supplier

Confirm to collect the product to my collection?

OKCancel

About|Contact|Cas|Product Name|Molecular|Country|Encyclopedia

Message|New Cas|MSDS|Service|Advertisement|CAS DataBase|Article Data|Manufacturers | Chemical Catalog

©2008 LookChem.com,License: ICP

NO.:Zhejiang16009103

complaints:service@lookchem.com Desktop View