degumming enzyme

Details:

Technological process

Enzyme liquid configuration---add flax---steeping---flog flax---dehydration---shake flax---drying (or airing)

Technological conditions:

Flax degumming:   3--4% (meaning per 500 kg flax using 20 kg degumming enzyme)

PH:               9   (PH value must be controlled strictly)

Bath rate:          1: 10 (meaning per 500 kg flax using water 5 sides)

Temperature:       > 20 °C

Time:              20--24 hours

1. Take advantage of plant existing degumming pool, add water to 2/3 of pool.
2. Adjust PH value to 9 using alkaline, meanwhile circulate completely with circulating pump.
3. Add flax degumming enzyme after adjusting PH value, begin to add flax after circulating be uniformly, and make flax steeping in the enzyme liquid absolutely.

( Note: add degumming enzyme must be after adjusting PH to 9 and circulating well)

 Soaking     

1. Adjust soaking time appropriately based on heat preservation condition, it can be reached degumming effect by properly extend soaking time when the thermal insulation condition is a little worse.
2. Generally judge if degumming reach effect according to experience, fish up soaked flax from pool, grind lightly with thumb and index finger, if fiber is quite loose, and finger feels a bit tacky, it state that pectin substance has been resolved well. (pectin substance has been resolved to substance like polysaccharides)

Three. Knock flax

1. Number of turns knocking flax can be intended to be 8 turns, which is meaning turn in knocking flax machine at least 8 turns.
2. It must knock with flip without stop when knock hemp, to ensure uniform.
3. To judge knocking hemp is qualified, the method if via view separability of fibrilia, after dehydration, shake hemp, it can reveal white fibrilia.
4. Degummed hemp can’t be air drying before knocking hemp, once air drying, carbohydrate adhere to fibrilia which is not easy to wash off totally.

Dehydration

 Shake flax

Remove smash hemp stem in flax by shaking of shake hemp machine, at the same time, loose fibrilia, which is convenient for latter separation of fibrilia, please note when shaking flax:

1. Can’t add too much flax to shaking hemp machine one time, smash hemp stem can’t be removed completely if add too much at a time.
2. Shake smash hemp stem out as far as possible.
3. Exam quality of flax frequently when shaking flax, observe if fibrilia be separated already.

 Continue use of degumming enzyme liquid

Enzyme is a bio-catalyst, the rest of enzyme liquid still remain a part of biological activity after soaking enzyme. Through test examination, use rest enzyme liquid, add 50% new enzyme liquid of first time dosage, can completely reach degumming effect as first time new enzyme liquid. The specific practice is as follows:

1. Add water to first used enzyme liquid, and adjust PH to 9 when adding water, and absolutely circulate, then continue add 50% dosage degumming enzyme, ( which is meaning dispose per 500 kg flax, continue adding 10 kg degumming enzyme).
2. The degumming effect has no great difference compared with new enzyme liquid when enzyme liquid recycled one time, but great difference with second recycle. The reason is that there are too much resolved carbohydrate and other impurity accumulated in effluent, which restrict enzyme affect, thereby influence degumming effect, as a result, degumming enzyme reused one time can not be used for third time.  

Company Introduction

ZIBO GREEN TRADE CO., LTD was established in 2010, located in Textile Science and Technology cith of Zhoucun district. It is a limited liability company which operates sales and import & export trade. The products include textile enzyme、paper-making enzyme、pre-treatment auxiliaries、function  consolidation agent、textiles、fabrics etc.

Our service

free samples can be sent 

meet  at the exhibition