Superiority:

ProName: Hydroxypropyl methyl cell...

CasNo: 9004-65-3

Appearance: White powder

Application: Putty powder, tile adhesive, cement mortar

DeliveryTime: prompt shipment after receiving payment.

PackAge: 25kg/bag.

Port: Shanghai

ProductionCapacity: 30000 Metric Ton/year

Purity: 99%

Storage: away from heat and sunshine

Transportation: by sea, air and express

LimitNum: 1kg

Valid Period: 2 years 

Product name: Hydroxypropyl methyl cellulose

for desiccant/cement mortar 9004-65-3 Hydroxypropyl Methyl Cellulose Putty powder

Inhalation: Remove from exposure and move to fresh air immediately. If not breathing, give artificial respiration. If breathing is difficult, give oxygen. Get medical aid.

Eye: Flush eyes with plenty of water for at least 15 minutes, occasionally lifting the upper and lower eyelids. Get medical aid.

Skin: Flush skin with plenty of water for at least 15 minutes while removing contaminated clothing and shoes. Get medical aid. If irritation develops or persists.

Ingestion: If victim is conscious and alert, give 2-4 cupfuls of milk or water. Never give anything by mouth to an unconscious person. Get medical aid.

Medical conditions aggravated by exposure: No medical conditions are known to be aggravated by these products.

Notes to Physician: None

Section 5 Fire fighting measures

General Information: As in any fire, wear a self-contained breathing apparatus in pressure-demand, MSHA/NIOSH(approved or equivalent), and full protective gear. Non-combustible, substance itself does not burn but may decompose upon heating to produce irritating, corrosive and/or toxic fumes.

Flammable class: 0

Suitable extinguishing media: Water, CO2, Dry Chemicals, Foam-Fog

Fire/Explosion Hazards: Negligible fire hazard when exposed to heat or flame.

Fire fighting procedure:Wear self contained breathing apparatus meeting NIOSH standards. Other information: Wear self-contained breathing apparatus and complete personal protective equipment when potential for exposure to products of combustion exists.

Section 6 Accidental release measures

Small Spill: Use appropriate tools to put the spilled solid in a convenient waste disposal container. Finish cleaning by spreading water on the contaminated surface and dispose of according to local and regional authority requirements.

Large Spill: Use a shovel to put the material into a convenient waste disposal container. Finish cleaning by spreading water on the contaminated surface and allow evacuating through  the sanitary system. Be careful that the product is not present at a concentration level above TLV. Check TLV on the MSDS and with local authorities.

Section 7 Handling and storage

The regulations relating to storage remises apply to workshop where the product is handled: Handling: removal of mobile products need to wear protective gloves when products for  the brittle materials, handled with care when handling Apply good manufacturing  practice  & industrial hygiene practices. Observe good personal hygiene, and do not eat, drink or smoke whilst handling. Wear protective goggles and gloves when handling material. Clean cloths, must be worn. Observe all warning and precautions listed for the product.

Storage: store in a cool & dry area away from heat sources & protected from light. Stored in relatively stable areas., to avoid collision occurred on a hard object avoid dust formation and