Superiority:

factory Succinic Acid on offer 110-15-6 exporter On Sale

Product Name:	Succinic acid
Synonyms:	SUCCINIC ACID, REAGENT (ACS)SUCCINIC ACID, REAGENT (ACS)SUCCINIC ACID, REAGENT (ACS)SUCCINIC ACID, REAGENT (ACS);SUCCINIC ACID GRAN;Aspartic Acid Impurity 8;Succinic acid Manufacturer;Acid of amber;Asuccin;Bernsteinsaure;Butanediacid
CAS:	110-15-6
MF:	C4H6O4
MW:	118.08804
EINECS:	203-740-4
Product Categories:	TCI-;-;Food & Feed ADDITIVES;SuccinicSeries;alpha,omega-Alkanedicarboxylic Acids;alpha,omega-Bifunctional Alkanes;Monofunctional & alpha,omega-Bifunctional Alkanes;Heterocycles;Inhibitors;ACS Grade;Building Blocks;C1 to C5;Carbonyl Compounds;Carboxylic Acids;Chemical Synthesis;Essential Chemicals;Inorganic Salts;Organic Building Blocks;Research Essentials;Solutions and Reagents;chemical reagent;pharmaceutical intermediate;phytochemical;reference standards from Chinese medicinal herbs (TCM).;standardized herbal extract;Fine chemicals
Mol File:	110-15-6.mol

Description: Mixture of substances listed below with additions.

toxic gases may be generated by thermal decomposition or combustion.

Extinguishing Media: For small fires, use water spray, dry chemical, carbon dioxide or chemical foam. Use water spray, dry chemical, carbon dioxide, or appropriate foa

Section 6 Accidental release measures

General Information: Use proper personal protective equipment as indicated in Section 8. Spills/Leaks: Clean up spills immediately, observing precautions in the Protective Equipment section. Sweep up, then place into a suitable container for disposal. Avoid generating dusty conditions. Provide ventilation.

Section 7 Handling and storage

Handling: Wash thoroughly after handling. Remove contaminated clothing and wash before reuse. Use with adequate ventilation. Minimize dust generation and accumulation. May form flammable dust-air mixtures. Avoid contact with eyes, skin, and clothing. Keep container tightly  closed. Avoid ingestion and inhalation. Wash clothing before reuse.

Storage: Store in a tightly closed container. Keep from contact with oxidizing materials. Store in a cool, dry, well-ventilated area away from incompatible

Section 8 Exposure controls/personal protection

Engineering Controls: Facilities storing or utilizing this material should be equipped with an eyewash facility and a safety shower. Use adequate ventilation to keep airborne concentrations low. Exposure Limits CAS# 110-15-6: Personal Protective Equipment Eyes: Wear appropriate protective eyeglasses or chemical safety goggles as described by OSHA's eye and face protection regulations in 29 CFR 1910.133 or European Standard EN166.

Skin: Wear appropriate protective gloves to prevent skin exposure.

Clothing: Wear appropriate protective clothing to prevent skin exposure.

Respirators: A respiratory protection program that meets OSHA's 29 CFR 1910.134 and ANSI Z88.2 requirements or European Standard EN 149 must be followed whenever workplace conditions warrant a respirator's use. Follow the OSHA respirator regulations found in 29 CFR 1910.134 or European Standard EN 149. Always use a NIOSH or European Standard EN 149 approved respirator when necessary.

Section 9 Physical and chemical properties

Physical State: Solid

Color: white

Odor: none reported

pH: 2.7 (0.1 M sol.)

Vapor Pressure: Negligible.

Viscosity: Not available.

Boiling Point: 455 deg F

Freezing/Melting Point: 363 deg F

Autoignition Temperature: 630 deg C ( 1,166.00 deg F)