Ceramic Body Binder Body Binder Ceramic binder
Ceramic Body Binder
Code No:FG-253
Dosage:0.15%~0.5%
Advantages & Benefits:
1. Can help to improve body-crack, body-low-density, spraying-powder moisture content situation; help body molding and sintering; while it has No adverse effect on body firing result, so to help increase final-product rate for customers.
2. No adverse effect on body-slip flow speed, help to reduce the need on high-efficiency-deflocculant additives.
3.Can help to improve the spraying-powder particle grading, reducing both oversize & ultrafined particles, and obviously increase size of 40~80mesh, and help improve powder volume weight.
4. Can befittingly help to reduce the dependence of the clay usage % in body formula, (including ball clay& kaolin clay)
Add this product (code FG-253) into body slip and have it grinded no less than 2hours, then go to following steps like drying, molding, firing and dry-green strength checking, etc.
( note: Be sure to get best results, the tests should be handled by fixed technician under same moisture condition, same pressure situation and keep same dwelling time; 8~10 times test suggested, remove the highest and lowest value to get its average value)
Packing &Storage: 25kgs/bag, keep in dry clean place
( moisture-proof and fire-proof condition needed)
Ceramic Body Binder
Code No:FG-253
Dosage:0.15%~0.5%
Advantages & Benefits:
1. Can help to improve body-crack, body-low-density, spraying-powder moisture content situation; help body molding and sintering; while it has No adverse effect on body firing result, so to help increase final-product rate for customers.
2. No adverse effect on body-slip flow speed, help to reduce the need on high-efficiency-deflocculant additives.
3.Can help to improve the spraying-powder particle grading, reducing both oversize & ultrafined particles, and obviously increase size of 40~80mesh, and help improve powder volume weight.
4. Can befittingly help to reduce the dependence of the clay usage % in body formula, (including ball clay& kaolin clay)
Add this product (code FG-253) into body slip and have it grinded no less than 2hours, then go to following steps like drying, molding, firing and dry-green strength checking, etc.
( note: Be sure to get best results, the tests should be handled by fixed technician under same moisture condition, same pressure situation and keep same dwelling time; 8~10 times test suggested, remove the highest and lowest value to get its average value)
Packing &Storage: 25kgs/bag, keep in dry clean place
( moisture-proof and fire-proof condition needed)
CAS NO:10101-52-7
CAS NO:
CAS NO:
CAS NO:
CAS NO:
CAS NO:7758-29-4
About|Contact|Cas|Product Name|Molecular|Country|Encyclopedia
Message|New Cas|MSDS|Service|Advertisement|CAS DataBase|Article Data|Manufacturers | Chemical Catalog
©2008 LookChem.com,License: ICP
NO.:Zhejiang16009103
complaints:service@lookchem.com Desktop View