Water soluble silicone release agent supplier

Details:

Coagulation is caused by the addition of external substances to the blood. External pathways activate clot formation through biochemical processes

Clots. Plastic tubes require the use of sprayed blood coagulants to ensure rapid and dense clot formation. Blood coagulation promoting surface sites

The higher the density, the faster the setting time. Siliceous substances (such as glass, diatomite) accelerate clot formation by contact with blood,

The complete procoagulant effect was formed in about 30 minutes. The amount of blood coagulant varies with the manufacturer.

The coagulant also helps to isolate the potential fibrin formation in serum. It is good for prothrombin. Despite all this

Clot activator can coagulate rapidly for 10 to 20 minutes, but the clot is not easy to separate from serum. Blood coagulants can be formed by the formation of small molecules

The bead is added to the tube to act with the carrier on the surface of the inner tube. The clot activator is quickly suspended in the blood and coagulated

At the beginning of the clot, the carrier can be dissolved in both serum and clot.

Recently, Desheng biochemical participated in the project to assist customers to release a rapid serum test tube containing thrombin; orange

The clot was activated rapidly by the color plug within 5 minutes. It can ensure that the rapid serum test tube has the same clinical value as other commercially available serum test tubes

And so on. Desheng biochemical found in the study that the problem with some blood coagulants is that they must be fully mixed to form a clot

Complete precipitation. If soluble fibrin clots are formed, they can interfere with the accuracy of the pipette device or the solid phase in the immunoassay

Combined. Heteroatoms (non carbon atoms and hydrogen atoms in the main chain of molecular structure) can be introduced into the tube wall surface by using plasma gas,

To accelerate coagulation without contaminating serum or clots with adhesives or blood coagulants.

The proteomic analysis after blood coagulation can also be changed by clot activator. Silica and silicate

When the blood coagulant is sprayed on the plastic tube, the active metalloproteinase is released and the matrix is compounded. Application of Desheng biochemical as coagulant

R & D and manufacturer, here is a special reminder: in order to achieve good coagulation effect, determine the most suitable coagulant and water-soluble silicide

In order to make these substances function normally, we should always add them to different types and sizes of blood collection vessels

It will not adversely affect the quality of blood samples and test results.