Disodium sulfate decahydrate Disodium sulfate decahydrate (Na2SO4.10H2O) Glauber's salt
Material Safety Data sheet
Ingredient
sodium sulphate Anhydrous
--------------------------------------------------------------------------------
1. Product Identification
Synonyms: sodium sulphate Anhydrous;Sodium sulfate ; disodium sulfate decahydrate; glauber's salt; sulfuric
acid, sodium salt, decahydrate; sodium sulfate, 10-hydrate
CAS No.: 7757-82-6 (Anhydrous)
Molecular Weight: 142.04
Chemical Formula: Na2SO4
2. Composition/Information on Ingredients
CAS No Percent Hazardous
--------------------------------------- ------------ ------------ ---------
Sodium Sulfate 7757-82-6 98 - 100% Yes
--------------------------------------------------------------------------------
3. Hazards Identification
Emergency Overview
--------------------------
As part of good industrial and personal hygiene and safety procedure, avoid all unnecessary exposure to the
chemical substance and ensure prompt removal from skin, eyes and clothing.
SAF-T-DATA(tm) Ratings (Provided here for your convenience)
-----------------------------------------------------------------------------------------------------------
Health Rating: 1 - Slight
Flammability Rating: 0 - None
Reactivity Rating: 1 - Slight
Contact Rating: 1 - Slight
Lab Protective Equip: GOGGLES; LAB COAT
Storage Color Code: Green (General Storage)
-----------------------------------------------------------------------------------------------------------
Potential Health Effects
----------------------------------
Inhalation:
Not expected to be a health hazard.
Ingestion:
Mildly toxic by ingestion. Systemic toxicity is unlikely unless massive amounts have been swallowed. Drinking
water with > 500 mg/L may result in gastrointestinal irritation.
Skin Contact:
No adverse effects expected.
Eye Contact:
No adverse effects expected but dust may cause mechanical irritation.
Chronic Exposure:
No information found.
Aggravation of Pre-existing Conditions:
No information found.
--------------------------------------------------------------------------------
4. First Aid Measures
Inhalation:
Not expected to require first aid measures.
Ingestion:
Give several glasses of water to drink to dilute. If large amounts were swallowed, get medical advice.
Skin Contact:
Wash exposed area with soap and water. Get medical advice if irritation develops.
Eye Contact:
Wash thoroughly with running water. Get medical advice if irritation develops.
--------------------------------------------------------------------------------
5. Fire Fighting Measures
Fire:
Not considered to be a fire hazard.
Explosion:
Not considered an explosion hazard, but violent explosions occur when potassium sulfate and sodium sulfate are
melted with aluminum.
Fire Extinguishing Media:
Use any means suitable for extinguishing surrounding fire.
Special Information:
Use protective clothing and breathing equipment appropriate for the surrounding fire.
--------------------------------------------------------------------------------
6. Accidental Release Measures
Ventilate area of leak or spill. Wear appropriate personal protective equipment as specified in Section 8. Spills:
Sweep up and containerize for reclamation or disposal. Vacuuming or wet sweeping may be used to avoid dust
dispersal.
--------------------------------------------------------------------------------
7. Handling and Storage
Keep in a tightly closed container, stored in a cool, dry, ventilated area. Protect against physical damage. Isolate
from incompatible substances. Containers of this material may be hazardous when empty since they retain product
residues (dust, solids); observe all warnings and precautions listed for the product.
--------------------------------------------------------------------------------
8. Exposure Controls/Personal Protection
Airborne Exposure Limits:
None established.
Skin Contact:
No adverse effects expected.
Eye Contact:
No adverse effects expected but dust may cause mechanical irritation.
Chronic Exposure:
No information found.
Aggravation of Pre-existing Conditions:
No information found.
--------------------------------------------------------------------------------
4. First Aid Measures
Inhalation:
Not expected to require first aid measures.
Ingestion:
Give several glasses of water to drink to dilute. If large amounts were swallowed, get medical advice.
Skin Contact:
Wash exposed area with soap and water. Get medical advice if irritation develops.
Eye Contact:
Wash thoroughly with running water. Get medical advice if irritation develops.
--------------------------------------------------------------------------------
5. Fire Fighting Measures
Fire:
Not considered to be a fire hazard.
Explosion:
Not considered an explosion hazard, but violent explosions occur when potassium sulfate and sodium sulfate are
melted with aluminum.
Fire Extinguishing Media:
Use any means suitable for extinguishing surrounding fire.
Special Information:
Use protective clothing and breathing equipment appropriate for the surrounding fire.
--------------------------------------------------------------------------------
6. Accidental Release Measures
Ventilate area of leak or spill. Wear appropriate personal protective equipment as specified in Section 8. Spills:
Sweep up and containerize for reclamation or disposal. Vacuuming or wet sweeping may be used to avoid dust
dispersal.
--------------------------------------------------------------------------------
7. Handling and Storage
Keep in a tightly closed container, stored in a cool, dry, ventilated area. Protect against physical damage. Isolate
from incompatible substances. Containers of this material may be hazardous when empty since they retain product
residues (dust, solids); observe all warnings and precautions listed for the product.
--------------------------------------------------------------------------------
8. Exposure Controls/Personal Protection
Airborne Exposure Limits:
None established.
Hazardous Polymerization:
Will not occur.
Incompatibilities:
In combination with sodium sulfate, aluminum and magnesium will explode @ 800C (1472F); strong mineral
acids and bases.
Conditions to Avoid:
Air, incompatibles.
--------------------------------------------------------------------------------
11. Toxicological Information
Investigated as a tumorigen, mutagen, reproductive effector. No LD50/LC50 information found relating to normal
routes of occupational exposure.
--------\Cancer Lists\------------------------------------------------------
---NTP Carcinogen---
Ingredient Known Anticipated IARC Category
------------------------------------ ----- ----------- -------------
Sodium Sulfate (7757-82-6) No No None
--------------------------------------------------------------------------------
12. Ecological Information
Environmental Fate:
When released into the soil, this material is expected to leach into groundwater. This material is not expected to
significantly bioaccumulate.
Environmental Toxicity:
This material is not expected to be toxic to aquatic life. The LC50/96-hour values for fish are over 100 mg/l. The
EC50/48-hour values for daphnia are over 100 mg/l.
--------------------------------------------------------------------------------
13. Disposal Considerations
Whatever cannot be saved for recovery or recycling should be managed in an appropriate and approved waste
disposal facility. Processing, use or contamination of this product may change the waste management options.
State and local disposal regulations may differ from federal disposal regulations. Dispose of container and unused
contents in accordance with federal, state and local requirements.
--------------------------------------------------------------------------------
14. Transport Information
Not regulated.
--------------------------------------------------------------------------------
15. Regulatory Information
--------\Chemical Inventory Status - Part 1\---------------------------------
Ingredient TSCA EC Japan Australia
----------------------------------------------- ---- --- ----- ---------
Sodium Sulfate (7757-82-6) Yes Yes Yes Yes
--------\Chemical Inventory Status - Part 2\---------------------------------
--Canada--
Ingredient Korea DSL NDSL Phil.
----------------------------------------------- ----- --- ---- -----
Hazardous Polymerization:
Will not occur.
Incompatibilities:
In combination with sodium sulfate, aluminum and magnesium will explode @ 800C (1472F); strong mineral
acids and bases.
Conditions to Avoid:
Air, incompatibles.
--------------------------------------------------------------------------------
11. Toxicological Information
Investigated as a tumorigen, mutagen, reproductive effector. No LD50/LC50 information found relating to normal
routes of occupational exposure.
--------\Cancer Lists\------------------------------------------------------
---NTP Carcinogen---
Ingredient Known Anticipated IARC Category
------------------------------------ ----- ----------- -------------
Sodium Sulfate (7757-82-6) No No None
--------------------------------------------------------------------------------
12. Ecological Information
Environmental Fate:
When released into the soil, this material is expected to leach into groundwater. This material is not expected to
significantly bioaccumulate.
Environmental Toxicity:
This material is not expected to be toxic to aquatic life. The LC50/96-hour values for fish are over 100 mg/l. The
EC50/48-hour values for daphnia are over 100 mg/l.
--------------------------------------------------------------------------------
13. Disposal Considerations
Whatever cannot be saved for recovery or recycling should be managed in an appropriate and approved waste
disposal facility. Processing, use or contamination of this product may change the waste management options.
State and local disposal regulations may differ from federal disposal regulations. Dispose of container and unused
contents in accordance with federal, state and local requirements.
--------------------------------------------------------------------------------
14. Transport Information
Not regulated.
--------------------------------------------------------------------------------
15. Regulatory Information
--------\Chemical Inventory Status - Part 1\---------------------------------
Ingredient TSCA EC Japan Australia
----------------------------------------------- ---- --- ----- ---------
Sodium Sulfate (7757-82-6) Yes Yes Yes Yes
--------\Chemical Inventory Status - Part 2\---------------------------------
--Canada--
Ingredient Korea DSL NDSL Phil.
----------------------------------------------- ----- --- ---- -----
BAKER, INC. WILL NOT BE RESPONSIBLE FOR DAMAGES RESULTING FROM USE OF OR RELIANCE
UPON THIS INFORMATION.
********************************************************************************************
Item | Standard |
Na2so4% |
99.0min |
WATER INSOLUBLE% |
0.05max |
Ca+Mg% |
0.15max |
SODIUM CHLORIDE |
0.35max |
WATER% |
0.20max |
WHITE VALUE% |
82min |
Package&Shipping
Qingdao Bravery International Trading Co., LTD. is located in the beautiful tourist city of Qingdao, is a comprehensive chemical enterprise which doing import and export business. Product range including, API, pharmacy intermediates,food additive,Surfactant ,fungicides and other general chemicals. etc.
With the developing world market, we adhere to the principle of "quality, service, integrity and development" ,Forge ahead,and constantly in pursuit of higher level of product quality and service.
We warmly welcome customers home and abroad to build mutual trust, mutual benefit and stable cooperation relation.
General items: import and export of goods; Technology import and export; Food additive sales; Feed additive sales; Sales of special chemical products (without hazardous chemicals); Sales of chemical products (excluding licensed chemical products); Livestock and fishery feed sales; Feed raw material sales; Fertilizer sales; Sales of bio-based materials; Health food (pre-packaged) sales; Food sales (pre-packaged food only); Sales of agricultural and sideline products; Pharmaceutical excipients sales; Drug wholesale
We could give you:
1.Best quality in your requirement
2.Competitive price in China market with standard high quality or customize
3.mature Technical support,Well-trained and professional technologist and sales with rich experience in the field for 5-10 years
4.Professional logistic support,Free sample and correct shipping documents dispatched according to regulations of different countries
All we want is win-win business. Send your inquiries, you will get it!
Why choose us:
1.Factory direct sales, so we can provide the competitive price and high quality product base on 5 years of production and R&D experience
2.It is available in stock for quick shipment. Products could be packaged according to customer’s specialized requirements.
3.The products can be transported by Courier, air or sea.
4.Customers will receive the most professional technical support and efficient service.
5.Any inquiries will be replied within 24hours.
6.High purity with test report.
About|Contact|Cas|Product Name|Molecular|Country|Encyclopedia
Message|New Cas|MSDS|Service|Advertisement|CAS DataBase|Article Data|Manufacturers | Chemical Catalog
©2008 LookChem.com,License: ICP
NO.:Zhejiang16009103
complaints:service@lookchem.com Desktop View