Polixetonium chloride

Superiority:

Poly[oxyethylene(dimethylimino) ethylene(dimethylimino) ethylene dichloride]

Other Trade Name: Busan77;WSCP; Mayosperse60; Polixetonium Chloride; Polyquaternium-42

 

Items	Standard
Appearance	Amber liquid
Solid content%	60 min
Density(20 )g/cm3	1.12-1.17
PH(10% water solution)	5.0-7.0

 

Controls algae and bacteria in cooling and process water

Effective molluscicide

Effective over a wide pH range

Non-foaming

GreatAp 126 is a water-soluble cationic polymer recommended for the control of aerobic bacteria, fungi, algae, anaerobic bacteria, and sulfate-reducing bacteria found in commercial and industrial water systems. It is suggested for use in cooling tower and air washer systems.

 

Recirculating cooling water towers

Prior to using GreatAp126-60 in recirculating cooling water towers, systems must be cleaned to remove algal growth, microbiological slime, and other deposits. Then make an initial slug addition of 27- 36 ML of GreatAp126-60 per 3800 L of water to provide 8-20 ppm, based on the total weight of water in the system. Repeat initial dosage until control is evident. Make subsequent slug additions of 6- 65ML per 3800 L of water (2-20 ppm) every 2-5 days or as needed. The frequency of addition depends upon the relative amount of bleed-off and the severity of the microbiological problem. Slug additions must be made in the cooling water tower sump.

 

Industrial air washing systems

use to control bacteria in industrial air washing systems that maintain effective mist eliminating components. Prior to its use, systems must be cleaned to remove bacterial slime and other deposits.

An initial slug dose of 99-164 ML per 3800L of water is required. Repeat initial dosage until control is evident. Subsequent slug additions of 67-164ML per 3800L of water should be employed every 1-5 days, or as needed. The frequency of addition depends upon the relative amount of bleed-off and severity of the bacterial problem. Slug additions may be made to the sump or to the water collection trays of the air wash system.

 

Paper manufacture

GreatAp126 will retard microbial growth that causes degradation of cooked starch used in paper manufacture. GreatAp126 is added at a rate of 25-250 ppm based on the total weight of the starch and water. The treatment rate necessary to retard spoilage of the starch will vary with the extent of contamination of the make-up water and the length of storage.

 

Control of mullosks

GreatAp126 has effectively prevented fouling by mollusks, It is used for the control of mussels and oysters in industrial and municipal water intakes. Prevent it from entering the water collection pipeline, water pipelines and pumps. Adult mussels are removed from the surface of the device to kill their larvae. According to the adhesion situation, 2-20ppm is added for serious pollution, for 21 consecutive days, until there is obvious effect, then 2~5ppm, adding 60 minutes, once a day or continuously adding 0.5ppm. It is effective with or without the use of chlorine.

 

Typical product characteristics

Active ingredients: Poly[oxyethylene(dimethyliminio)ethylene(dimethyliminio)ethylene dichloride] ................60%

Density at 25°C...................................................................................................................................................................... 1.13-1.16 g/mL

pH ................................................................................................................................................................................................ 6 – 8

 

Packaging & Shipping

 

  

Usual packing: 220kg net PE drum, 1L/4L/5L plastic bottle, or as requirement from customer.