Add time:08/06/2019         Source:sciencedirect.com

In this study, the effects of the addition of carbonyl nickel powder on the density, microstructure, and mechanical properties of sintered yttria-stabilized zirconia (3YSZ) were investigated. Sintering at 1300 °C resulted in the optimum comprehensive mechanical properties. The addition of 5 vol% carbonyl Ni increased the fracture toughness and flexural strength from 9.51 MPa m1/2 to 14.5 MPa m1/2 and from 747 MPa to 873 MPa, respectively. The addition of carbonyl nickel showed greater improvement than did the addition of spherical Ni powder. The dendritic morphology improved the interface bonding between the ceramic and the metal, enabling a bridging mechanism of the ductile phase. However, further Ni addition decreased the mechanical properties. X-ray diffraction results showed that the amounts of the monoclinic phase (M) and cubic phase (C) of 3YSZ increased, whereas the amount of the tetragonal phase (T) decreased. The Y segregation near the Ni particles, which was confirmed by an energy dispersive spectrometer (EDS), caused the phase changes. The segregation of Y occurred during the cooling stage, rather than the holding stage, of sintering. During the cooling stage, the heat mismatch between Ni and ZrO2 resulted in strong elastic strain energy, which promoted Y segregation.

We also recommend Trading Suppliers and Manufacturers of NICKEL CARBONYL (cas 13463-39-3). Pls Click Website Link as below: cas 13463-39-3 suppliers