34967-24-3Relevant articles and documents
Selective catalysis for the reductive amination of furfural toward furfurylamine by graphene-co-shelled cobalt nanoparticles
Liu, Jianguo,Ma, Longlong,Zhong, Shurong,Zhuang, Xiuzheng
, p. 271 - 284 (2022/01/19)
Amines with functional groups are widely used in the manufacture of pharmaceuticals, agricultural chemicals, and polymers but most of them are still prepared through petrochemical routes. The sustainable production of amines from renewable resources, such as biomass, is thus necessary. For this reason, we developed an eco-friendly, simplified, and highly effective procedure for the preparation of a non-toxic heterogeneous catalyst based on earth-abundant metals, whose catalytic activity on the reductive amination of furfural or other derivatives (more than 24 examples) proved to be broadly available. More surprisingly, the cobalt-supported catalyst was found to be magnetically recoverable and reusable up to eight times with an excellent catalytic activity; on the other hand, the gram-scale tests catalyzed by the same catalyst exhibited the similar yield of the target products in comparison to its smaller scale, which was comparable to the commercial noble-based catalysts. Further results from a series of analytical technologies involving XRD, XPS, TEM/mapping, and in situ FTIR revealed that the structural features of the catalyst are closely in relation to its catalytic mechanisms. In simple terms, the outer graphitic shell is activated by the electronic interaction as well as the induced charge redistribution, enabling the easy substitution of the –NH2 moiety toward functionalized and structurally diverse molecules, even under very mild industrially viable and scalable conditions. Overall, this newly developed catalyst introduces the synthesis of amines from biomass-derived platforms with satisfactory selectivity and carbon balance, providing cost-effective and sustainable access to the wide applications of reductive amination.
Facile synthesis of controllable graphene-co-shelled reusable Ni/NiO nanoparticles and their application in the synthesis of amines under mild conditions
Cui, Zhibing,Liu, Jianguo,Liu, Qiying,Ma, Longlong,Singh, Thishana,Wang, Chenguang,Wang, Nan,Zhu, Yuting
supporting information, p. 7387 - 7397 (2020/11/19)
The primary objective of many researchers in chemical synthesis is the development of recyclable and easily accessible catalysts. These catalysts should preferably be made from Earth-abundant metals and have the ability to be utilised in the synthesis of pharmaceutically important compounds. Amines are classified as privileged compounds, and are used extensively in the fine and bulk chemical industries, as well as in pharmaceutical and materials research. In many laboratories and in industry, transition metal catalysed reductive amination of carbonyl compounds is performed using predominantly ammonia and H2. However, these reactions usually require precious metal-based catalysts or RANEY nickel, and require harsh reaction conditions and yield low selectivity for the desired products. Herein, we describe a simple and environmentally friendly method for the preparation of thin graphene spheres that encapsulate uniform Ni/NiO nanoalloy catalysts (Ni/NiO?C) using nickel citrate as the precursor. The resulting catalysts are stable and reusable and were successfully used for the synthesis of primary, secondary, tertiary, and N-methylamines (more than 62 examples). The reaction couples easily accessible carbonyl compounds (aldehydes and ketones) with ammonia, amines, and H2 under very mild industrially viable and scalable conditions (80 °C and 1 MPa H2 pressure, 4 h), offering cost-effective access to numerous functionalized, structurally diverse linear and branched benzylic, heterocyclic, and aliphatic amines including drugs and steroid derivatives. We have also demonstrated the scale-up of the heterogeneous amination protocol to gram-scale synthesis. Furthermore, the catalyst can be immobilized on a magnetic stirring bar and be conveniently recycled up to five times without any significant loss of catalytic activity and selectivity for the product.
Preparation of a magnetic mesoporous Fe3O4-Pd@TiO2 photocatalyst for the efficient selective reduction of aromatic cyanides
Zhao, Ziming,Long, Yu,Luo, Sha,Wu, Wei,Ma, Jiantai
, p. 6294 - 6302 (2019/04/25)
Herein, a hierarchical magnetic mesoporous microsphere was successfully prepared as a photocatalyst via a simple and reproducible route. Typically, Pd nanoparticles (NPs) were evenly dispersed on the surface of a magnetic Fe3O4 microsphere and then coated with a porous anatase-TiO2 shell to form Fe3O4-Pd@TiO2. The core-shell structure could efficiently suppress the conglomeration of Pd NPs during the calcination process at high temperatures as well as the shedding of Pd during the catalytic reaction process in the liquid phase. The as-prepared photocatalyst was characterized by TEM, XRD, XPS, VSM, and N2 adsorption-desorption. Fe3O4-Pd@TiO2 exhibits high photocatalytic activity for the selective reduction of aromatic cyanides to aromatic primary amines in an acidic aqueous solution. Moreover, this magnetic photocatalyst could be easily recovered from the reaction mixture by an external magnet and reused five times without significant reduction in its activity. The superior photocatalytic efficiency of the proposed photocatalyst may be attributed to its high charge separation efficiency and charge transfer rate, which are caused by the Schottky junction and large interface area. The results indicate that the strategy of coating the active noble metal sites with a mesoporous semiconductor shell has a significant potential for application in metal-semiconductor-based photocatalytic reactions.
