Poly(styrene-co-butadiene-co-methyl methacrylate) supplier

Name
POLY(STYRENE-CO-BUTADIENE-CO-METHYL
EINECS
CAS No. 25053-09-2
Density 1.05 g/mL at 25 °C(lit.)
Solubility
Melting Point
Formula C₁₇H₂₂O₂
Boiling Point 145.2°C at 760 mmHg
Molecular Weight 258.35
Flash Point 31.1°C
Transport Information
Appearance
Safety 26-36
Risk Codes 36
Molecular Structure
Hazard Symbols Xi
Synonyms Poly(styrene-co-butadiene-co-methyl;2-Propenoicacid,2-methyl-,methylester,polymerwith1,3-butadieneandethen;2-Propenoicacid,2-methyl-,methylester,polymerwith1,3-butadieneandethenylbenzene;Methylmethacrylate-butadiene-styreneterpolymer;Poly(styrene-co-butadiene-co-methylmethacrylate);Ylbenzene;Mbs resin;Methyl methacrylate-butadiene-styrene copolymer resin;
PSA 26.30000
LogP 4.42350

Poly(styrene-co-butadiene-co-methyl methacrylate) Specification

This chemical is called Poly(styrene-co-butadiene-co-methyl methacrylate), and it can also be named as Ylbenzene. With the CAS number of 25053-09-2, its molecular formula is C₁₇H₂₂O_2.In addition, the product categories are Synthetic Resin and Polymers. Usually, this chemical is soluble in acetone, benzene, toluene, dichloroethane and other organic solvents, and it's stable at normal temperature and pressure. Moreover, it should be stored at the sealed place which should be kept cool and dry. Especially, keep this chemical far way from high temperature and oxidants.

Preparation of this chemical: Using the materials of styrene, methyl methacrylate and styrene butadiene latex, you can get the product of the transparent composition. After the conversion rate of 20%～40% and the method of suspension in water, the Poly(styrene-co-butadiene-co-methyl methacrylate) would be finally made.

Uses of the Poly(styrene-co-butadiene-co-methyl methacrylate): This chemical is often used as transparent shell and parts for electrical and mechanical products, and it's also used to improve the impact resistance and transparency for high polymer. In addition, it's mainly used on improving the impact resistance of rigid PVC film, sheet, pellets and plates.

When you are using this chemical, please be cautious about it as the following: As the Poly(styrene-co-butadiene-co-methyl methacrylate) is irritating to eyes, you should wear suitable protective clothing when you use it. In case of contacting with eyes, rinse immediately with plenty of water and seek medical advice.

Product Name

POLY(STYRENE-CO-BUTADIENE-CO-METHYL

Poly(styrene-co-butadiene-co-methyl methacrylate) Specification

Related Products

Hot Products