Selenophos supplier | CasNO.10161-84-9

Name
Se-[2-(diethylamino)ethyl] O-ethyl ethylphosphonoselenoate
EINECS
CAS No. 10161-84-9
Density g/cm³
Solubility
Melting Point
Formula C10H24 N O2 P Se
Boiling Point 327.7°Cat760mmHg
Molecular Weight 300.24
Flash Point 152°C
Transport Information
Appearance
Safety Poison by subcutaneous route. When heated to decomposition it emits toxic fumes of NO_x, PO_x, and Se.
Risk Codes
Molecular Structure
Hazard Symbols
Synonyms Ethaneselenol,2-(diethylamino)-, Se-ester with O-ethyl ethylphosphonoselenoate (8CI);Selenophos
PSA
LogP

Selenophos Chemical Properties

Selenophos with CAS register number of 10161-84-9 is called for BRN 2361501 ; CID202353 ; LS-107038 ; O-Ethyl Se-(2-diethylaminoethyl)phosphonoselenoate ; Phosphonoselenoic acid, ethyl-, Se-(2-(diethylamino)ethyl) O-ethyl ester ,and so on.
IUPAC Name: 2-[Ethoxy(ethyl)phosphoryl]selanyl-N,N-diethylethanamine
CAS: 10161-84-9
Molecular formula: C₁₀H₂₄NO₂PSe
Molecular weight: 300.2368
Molecular structure:
ACD/LogP: 2.26
#H bond acceptors: 3
#H bond donors: 0
#Freely Rotating Bonds: 9
Flash Point: 152 °C
Enthalpy of Vaporization: 57 kJ/mol
Boiling Point: 327.7 °C at 760 mmHg
Vapour Pressure: 0.000199 mmHg at 25°C

Selenophos Uses

Selenophos (CAS No.10161-84-9) is usually thought to be used as chemical reagent.

Selenophos Toxicity Data With Reference

scu-mus LD50:21 µg/kg

JMCMAR Journal of Medicinal Chemistry. 10 (1967),115.

Selenophos Safety Profile

Poison by subcutaneous route. When heated to decomposition it emits toxic fumes of NO_x, PO_x, and Se.

Selenophos Standards and Recommendations

OSHA PEL: TWA 0.2 mg(Se)/m³
ACGIH TLV: TWA 0.2 mg(Se)/m³

Selenophos Specification

Removal in wastewater treatment of Selenophos (CAS No.10161-84-9) can be stated as follows:
Total removal:1.90 percent
Total biodegradation:0.09 percent
Total sludge adsorption:1.80 percent
Total to Air:0.00 percent
(using 10000 hr Bio P,A,S)

Product Name

Se-[2-(diethylamino)ethyl] O-ethyl ethylphosphonoselenoate