TITANIUM OXYSULFATE

IUPAC Name: Oxotitanium ; Sulfuric acid
Synonyms: Oxo(sulfato(2-)-O,O’)-Titanium ; Oxo[sulfato(2-)-o,o’]-titaniu ; Titanium(iv) oxide sulfate ; Titanium oxide sulfate hydrate ; Titanium oxysulfate ; Titanyl sulfate hydrate ; Titanyl sulfate ; Titanium sulfate
Product Categories: Inorganics;TitaniumMetal and Ceramic Science;Catalysis and Inorganic Chemistry;Chemical Synthesis;Salts;Titanium Salts;Analytical Reagents;Waste Water;Water Test
Stability: Stable. Incompatible with bases, carbides, chlorates, fulminates, nitrates, picrates, permanganates, nitrites, phosphorus and other materials. May react violently with organic materials, halides, finely powdered metals.
CAS: 13825-74-6
MolecularFormula:  O₅STi
Molecular Weight: 159.93
Molecular Struture:
EINECS: 237-523-0
Mol File: 13825-74-6.mol 
Boiling Point: 330 °C at 760 mmHg
Appearance: solid 
Density : 1.32 g/mL at 20 °C
Merck : 14,9475
Vapour Pressure: 3.35E-05 mmHg at 25°C

Reported in EPA TSCA Inventory.

Hazard Codes  C
Risk Statements  35
35:  Titanium sulfate (13825-74-6) can causes severe burns 
Safety Statements  26-36/37/39-45
26:  In case of contact with eyes, rinse immediately with plenty of water and seek medical advice 
45:  In case of accident or if you feel unwell, seek medical advice immediately (show label where possible) 
36/37/39: Titanium sulfate (13825-74-6) used, please wear suitable protective clothing, gloves and eye/face protection 
RIDADR  UN 2796 8/PG 2
WGK Germany  2
HazardClass  8
PackingGroup  II

DOT Classification:  8; Label: Corrosive

1.General Description: Titanium sulfate (13825-74-6) is a colorless or violet colored liquid. Dilution releases heat and may cause precipitation of solid titanium sulfate. Corrosive to metals and tissue. Titanium oxysulfate is used to make pigments and in dyeing.
2.Air & Water: Reactions Can generate heat on dilution with water.
3.Reactivity Profile: A highly acidic liquid.
4.Health Hazard: Toxic; inhalation, ingestion or skin contact with material may cause severe injury or death. Contact with molten substance may cause severe burns to skin and eyes. Avoid any skin contact. Effects of contact or inhalation may be delayed. Fire may produce irritating, corrosive and/or toxic gases. Runoff from fire control or dilution water may be corrosive and/or toxic and cause pollution.
5.Fire Hazard: Non-combustible, substance itself does not burn but may decompose upon heating to produce corrosive and/or toxic fumes. Some are oxidizers and may ignite combustibles (wood, paper, oil, clothing, etc.). Contact with metals may evolve flammable hydrogen gas. Containers may explode when heated.