Add time:07/18/2019         Source:sciencedirect.com

For more than a hundred years, extraction with ethyl ether has been the most used method for synthetizing H3PW12O40. However, the use of ethyl ether as the extraction agent faced many problems, such as strict regulation by public safety and environment authorities, poor operating environment, significant dissolution loss, low yields (approximately 80%), and difficulty in realizing continuous production.To overcome these problems, a new extraction method has been proposed in this paper, which uses 2-octanol as the extraction agent and water as the stripping agent. Under optimal conditions (30% 2-octanol in kerosene, O:A = 1:1, 180 g/L H2SO4, 20 g/L H3PO4, 45 °C, and a contact time of 2 min), 90.2% of H3PW12O40 contained in the solution was extracted in a single stage; the loaded H3PW12O40 could then be stripped completely via 3-stage continuous countercurrent stripping by maintaining O:A = 5:1, 65 °C, and t = 5 min. Finally, the obtained strip liquor, containing more than 550 g/L H3PW12O40, was evaporated to obtain crystals, resulting in an increased recovery rate of 10%.

We also recommend Trading Suppliers and Manufacturers of TUNGSTIC ACID (cas 11105-11-6). Pls Click Website Link as below: cas 11105-11-6 suppliers