poly(methacrylic acid)
1H,1H,2H,2H-tridecafluoro-n-octanol
3,3,4,4,5,5,6,6,7,7,8,8,8-tridecafluorooctyl 2-methylpropenoate
Conditions | Yield |
---|---|
With hydroquinone; toluene-4-sulfonic acid In toluene at 115℃; for 5h; | 94% |
With sulfuric acid; hydroquinone In benzene Heating; | |
With dmap; 1-ethyl-(3-(3-dimethylamino)propyl)-carbodiimide hydrochloride In dichloromethane at 20℃; |
methacryloyl anhydride
1H,1H,2H,2H-tridecafluoro-n-octanol
3,3,4,4,5,5,6,6,7,7,8,8,8-tridecafluorooctyl 2-methylpropenoate
Conditions | Yield |
---|---|
With dmap; triethylamine In dichloromethane; 1,1,2-Trichloro-1,2,2-trifluoroethane at 30℃; for 18h; | 76% |
1,1,1,2,2,3,3,4,4,5,5,6,6-Tridecafluoro-8-iodooctane
sodium methacrylate
3,3,4,4,5,5,6,6,7,7,8,8,8-tridecafluorooctyl 2-methylpropenoate
Conditions | Yield |
---|---|
With tetra-n-butylphosphonium chloride In o-xylene; water at 100℃; for 12h; Reagent/catalyst; | 71.8% |
Bromoform
1H,1H,2H,2H-tridecafluoro-n-octanol
acetone
3,3,4,4,5,5,6,6,7,7,8,8,8-tridecafluorooctyl 2-methylpropenoate
Conditions | Yield |
---|---|
With 1,8-diazabicyclo[5.4.0]undec-7-ene In benzonitrile; acetonitrile at 20℃; for 5h; | 70% |
chloroform
1H,1H,2H,2H-tridecafluoro-n-octanol
acetone
3,3,4,4,5,5,6,6,7,7,8,8,8-tridecafluorooctyl 2-methylpropenoate
Conditions | Yield |
---|---|
With 1,8-diazabicyclo[5.4.0]undec-7-ene In benzonitrile; acetonitrile at 50℃; for 42h; | 8.8% |
1H,1H,2H,2H-tridecafluoro-n-octanol
Methacryloyl chloride
3,3,4,4,5,5,6,6,7,7,8,8,8-tridecafluorooctyl 2-methylpropenoate
Conditions | Yield |
---|---|
With triethylamine In tetrahydrofuran Yield given; |
1,1,1,2,2,3,3,4,4,5,5,6,6-Tridecafluoro-8-iodooctane
potassium methacrylate
A
1H,1H,2H,2H-tridecafluoro-n-octanol
B
3,3,4,4,5,5,6,6,7,7,8,8,8-tridecafluorooct-1-ene
C
3,3,4,4,5,5,6,6,7,7,8,8,8-tridecafluorooctyl 2-methylpropenoate
Conditions | Yield |
---|---|
With 10H-phenothiazine In tert-butyl alcohol at 130 - 170℃; for 6 - 9h; |
1,1,1,2,2,3,3,4,4,5,5,6,6-Tridecafluoro-8-iodooctane
potassium methacrylate
A
3,3,4,4,5,5,6,6,7,7,8,8,8-tridecafluorooct-1-ene
B
3,3,4,4,5,5,6,6,7,7,8,8,8-tridecafluorooctyl 2-methylpropenoate
Conditions | Yield |
---|---|
With 10H-phenothiazine In tert-butyl alcohol at 160℃; for 9h; |
3,3,4,4,5,5,6,6,7,7,8,8,8-tridecafluorooctyl 2-methylpropenoate
Conditions | Yield |
---|---|
at 540℃; for 0.55h; Inert atmosphere; | 1.36 g |
mercaptopropylmethyldimethoxysilane
3,3,4,4,5,5,6,6,7,7,8,8,8-tridecafluorooctyl 2-methylpropenoate
Conditions | Yield |
---|---|
With 2,2'-azobis(isobutyronitrile) In acetonitrile at 80℃; for 4h; | 60% |
tris-(trimethylsilyl)silane
3,3,4,4,5,5,6,6,7,7,8,8,8-tridecafluorooctyl 2-methylpropenoate
Conditions | Yield |
---|---|
With Quinuclidine; pyridine; chloropyridinecobaloxime(III); (4s,6s)-2,4,5,6-tetra(9H-carbazol-9-yl)isophthalonitrile In acetonitrile at 25℃; Schlenk technique; Irradiation; Inert atmosphere; | 52% |
Conditions | Yield |
---|---|
With 2,2'-azobis(isobutyronitrile) In acetonitrile at 80℃; for 4h; |
3,3,4,4,5,5,6,6,7,7,8,8,8-tridecafluorooctyl 2-methylpropenoate
Conditions | Yield |
---|---|
In acetone at -196℃; Polymerization; γ-Irradiation; | |
at -196℃; X-irradiation; |
2-(dimethylamino)ethyl methacrylate
3,3,4,4,5,5,6,6,7,7,8,8,8-tridecafluorooctyl 2-methylpropenoate
poly(dimethylamino ethyl methacrylate-block-1H,1H,2H,2H-perfluorooctyl methacrylate); monomer(s): dimethylamino ethyl methacrylate; 1H,1H,2H,2H-perfluorooctyl methacrylate
Conditions | Yield |
---|---|
Stage #1: 2-(dimethylamino)ethyl methacrylate With 1-methoxy-2-methyl-1-trimethylsiloxy-1-propene; tetrabutylammonium bibenzoate In tetrahydrofuran for 1h; Stage #2: 3,3,4,4,5,5,6,6,7,7,8,8,8-tridecafluorooctyl methacrylate In tetrahydrofuran for 1h; Further stages.; | 5.9 g |
styrene
3,3,4,4,5,5,6,6,7,7,8,8,8-tridecafluorooctyl 2-methylpropenoate
poly[(tridecafluorooctyl methacrylate)-stat-styrene], miniemulsion copolymerization, particle diameter: 125 nm, Tg: 50 deg C, morphology: homogeneous; monomer: tridecafluorooctyl methacrylate; styrene
Conditions | Yield |
---|---|
With 2,2'-dimethyl-2,2'-azo-di-valeronitrile; acrylic acid anhydride; sodium dodecyl-sulfate In water at 60℃; for 2h; |
methacrylic acid methyl ester
3,3,4,4,5,5,6,6,7,7,8,8,8-tridecafluorooctyl 2-methylpropenoate
poly[(tridecafluorooctyl methacrylate)-co-(methyl methacrylate)], miniemulsion copolymerization, morphology: multiblobs, particle diameter: 120 nm, Tg: 50 deg C; monomer: tridecafluorooctyl methacrylate; methyl methacrylate
Conditions | Yield |
---|---|
With 2,2'-dimethyl-2,2'-azo-di-valeronitrile; sodium dodecyl-sulfate In water at 60℃; for 2h; |
methacrylic acid methyl ester
3,3,4,4,5,5,6,6,7,7,8,8,8-tridecafluorooctyl 2-methylpropenoate
poly[(tridecafluorooctyl methacrylate)-co-(methyl methacrylate)], miniemulsion copolymerization, morphology: core-shell, particle diameter: 128 nm, Tg: 50 deg C; monomer: tridecafluorooctyl methacrylate; methyl methacrylate
Conditions | Yield |
---|---|
With 2,2'-dimethyl-2,2'-azo-di-valeronitrile; acrylic acid anhydride; sodium dodecyl-sulfate In water at 60℃; for 2h; |
methacrylic acid methyl ester
3,3,4,4,5,5,6,6,7,7,8,8,8-tridecafluorooctyl 2-methylpropenoate
poly[(tridecafluorooctyl methacrylate)-co-(methyl methacrylate)], miniemulsion copolymerization, morphology: cups, particle diameter: 170 nm, Tg: 50 deg C; monomer: tridecafluorooctyl methacrylate; methyl methacrylate
Conditions | Yield |
---|---|
With 2,2'-dimethyl-2,2'-azo-di-valeronitrile; cetyltrimethylammonium chloride In water at 60℃; for 2h; |
3,3,4,4,5,5,6,6,7,7,8,8,8-tridecafluorooctyl 2-methylpropenoate
Conditions | Yield |
---|---|
With 1-perfluoromethyldecaline; 2,2'-dimethyl-2,2'-azo-di-valeronitrile; sodium dodecyl-sulfate In water at 60℃; for 2h; Product distribution; Further Variations:; Reagents; |
3,3,4,4,5,5,6,6,7,7,8,8,8-tridecafluorooctyl 2-methylpropenoate
2-methyl-butyl acrylate
poly[(tridecafluorooctyl methacrylate)-co-(n-butyl methacrylate)], miniemulsion copolymerization, morphology: homogeneous, particle diameter: 120 nm; monomer: tridecafluorooctyl methacrylate; n-butyl methacrylate
Conditions | Yield |
---|---|
With 2,2'-dimethyl-2,2'-azo-di-valeronitrile; sodium dodecyl-sulfate In water at 60℃; for 2h; |
3,3,4,4,5,5,6,6,7,7,8,8,8-tridecafluorooctyl 2-methylpropenoate
poly(ethylene oxide)-b-poly(perfluorohexylethyl methacrylate) diblock copolymer, atom-transfer radical polymerized, molar mass of the PEO block: 5000 g/mol, PFMA content: 15 wt percent, average number of FMA units per PEO chain: ca. 1-2, polydispersity: 1.03
Conditions | Yield |
---|---|
With N,N,N',N'',N'''-pentamethyldiethylenetriamine; copper(I) bromide In various solvent(s) at 85℃; |
3,3,4,4,5,5,6,6,7,7,8,8,8-tridecafluorooctyl 2-methylpropenoate
poly(perfluorohexylethyl methacrylate)-b-poly(ethylene oxide)-b-poly(perfluorohexylethyl methacrylate) triblock copolymer, atom-transfer radical polymerized, molar mass of the PEO block: 10000 g/mol, PFMA content: 11 wt percent, polydispersity index: 1.9
Conditions | Yield |
---|---|
With N,N,N',N'',N'''-pentamethyldiethylenetriamine; copper(I) bromide In various solvent(s) at 85℃; |
3,3,4,4,5,5,6,6,7,7,8,8,8-tridecafluorooctyl 2-methylpropenoate
A
6-O-(3-mercaptopropanoyl)-D-mannopyranose
Conditions | Yield |
---|---|
With Dimethyl(phenyl)phosphine In N,N-dimethyl-formamide at 20℃; for 16h; Michael condensation; Inert atmosphere; optical yield given as %de; |
3,3,4,4,5,5,6,6,7,7,8,8,9,9,10,10,11,11,12,12,12-henicosafluorododecyl methacrylate
3,3,4,4,5,5,6,6,7,7,8,8,9,9,10,10,10-heptadecafluorodecyl methacrylate
3,3,4,4,5,5,6,6,7,7,8,8,8-tridecafluorooctyl 2-methylpropenoate
A
6-O-(3-mercaptopropanoyl)-D-mannopyranose
Conditions | Yield |
---|---|
With Dimethyl(phenyl)phosphine In N,N-dimethyl-formamide at 20℃; for 16h; Michael Addition; Inert atmosphere; Overall yield = 84 %; | A n/a B n/a C n/a D n/a E n/a F n/a |
3,3,4,4,5,5,6,6,7,7,8,8,8-tridecafluorooctyl 2-methylpropenoate
Conditions | Yield |
---|---|
With Dimethyl(phenyl)phosphine Michael Addition; |
The 2-(Perfluorohexyl)ethyl methacrylate with its cas register number is 2144-53-8. It also can be called as 1,1,2,2-Tetrahydroperfluorooctyl methacrylate and the IUPAC Name about this chemical is 3,3,4,4,5,5,6,6,7,7,8,8,8-tridecafluorooctyl 2-methylprop-2-enoate. It belongs to the following product categories, such as monomer, Acrylic Monomers, Fluorinated Acrylics, Monomers and so on.
Physical properties about 2-(Perfluorohexyl)ethyl methacrylate are: (1)ACD/LogP: 6.71; (2)# of Rule of 5 Violations: 1; (3)ACD/LogD (pH 5.5): 6.71; (4)ACD/LogD (pH 7.4): 6.71; (5)ACD/BCF (pH 5.5): 74149.32; (6)ACD/BCF (pH 7.4): 74149.32; (7)ACD/KOC (pH 5.5): 106562.2; (8)ACD/KOC (pH 7.4): 106562.2; (9)#H bond acceptors: 2; (10)#Freely Rotating Bonds: 9; (11)Polar Surface Area: 26.3Å2; (12)Index of Refraction: 1.333; (13)Molar Refractivity: 60.9 cm3; (14)Molar Volume: 296.1 cm3; (15)Polarizability: 24.14x10-24cm3; (16)Surface Tension: 18.4 dyne/cm; (17)Enthalpy of Vaporization: 45.64 kJ/mol; (18)Vapour Pressure: 0.116 mmHg at 25°C.
Preparation: this chemical can be prepared by 3,3,4,4,5,5,6,6,7,7,8,8,8-tridecafluorooctan-1-ol and methacrylic acid-anhydride. This reaction will need reagent DMAP, Et3N and solvent CH2Cl2, 1,1,2-trichloro-1,2,2-trifluoro-ethane . The reaction time is 18 hour(s) with reaction temperature of 30 ℃. The yield is about 76%.
When you are using this chemical, please be cautious about it as the following:
This chemical is irritating to eyes, respiratory system and skin. When you are using it, wear suitable protective clothing. In case of contact with eyes, rinse immediately with plenty of water and seek medical advice.
You can still convert the following datas into molecular structure:
(1)Canonical SMILES: CC(=C)C(=O)OCCC(C(C(C(C(C(F)(F)F)(F)F)(F)F)(F)F)(F)F)(F)F
(2)InChI: InChI=1S/C12H9F13O2/c1-5(2)6(26)27-4-3-7(13,14)8(15,16)9(17,18)10(19,20)11(21,22)12(23,24)25/h1,3-4H2,2H3
(3)InChIKey: CDXFIRXEAJABAZ-UHFFFAOYSA-N
About|Contact|Cas|Product Name|Molecular|Country|Encyclopedia
Message|New Cas|MSDS|Service|Advertisement|CAS DataBase|Article Data|Manufacturers | Chemical Catalog
©2008 LookChem.com,License: ICP
NO.:Zhejiang16009103
complaints:service@lookchem.com Desktop View