MEMO msds information is provided by WD Silicone, which has become a major manufacturer of silane coupling agents in China, as well as a leading company for silane-related technology development, support and transform. 

SECTION 1: CHEMICAL PRODUCT and COMPANY IDENTIFICATION

Product Name:3-(Methacryloyloxy)propyltrimethoxysilane, DC Z-6030, 97%
Synonyms:3-(Trimethoxysilyl)propyl methacrylate, 3-
(Methacryloxy)propyltrimethoxysilane

SECTION 2 : COMPOSITION, INFORMATION ON INGREDIENTS

Chemical Name: 3–(Methacryloyloxy)propyltrimethoxysilane
CAS#:2530-85-0

SECTION 3 : HAZARDS IDENTIFICATION

Emergency Overview:Combustible. Irritant.
Causes eye irritation.
Causes skin irritation.
Causes respiratory tract irritation.
No data
Respiratory system. Eyes. Skin. Central Nervous System.

SECTION 4 : FIRST AID MEASURES

Immediately flush eyes with plenty of water for at least 20 minutes.
Assure adequate flushing of the eyes by separating the eyelids with fingers. Get immediate medical attention if irritation persists, or symptoms of overexposure become apparent.
Immediately wash skin with plenty of water for at least 20 minutes, while removing contaminated clothing and shoes. Get medical attention especially, if irritation develops, persists, or symptoms of overexposure become apparent.
Remove to fresh air. If not breathing, give artificial respiration or give oxygen by trained personnel. Keep warm. Get immediate medical
attention.
If swallowed, call a physician or poison control center immediately. Never give anything by mouth to an unconscious person. Do not induce vomiting unless instructed by medical personnel. Get medical attention.

SECTION 5 : FIRE FIGHTING MEASURES

Combustible liquid.
92°C (197.6°F)
Use dry powder or carbon dioxide when fighting a fire involving this
material.
Water extinguishers are not recommended.
As in any fire, wear self-contained breathing apparatus pressure-demand,
NIOSH (approved or equivalent) and full protective gear.

SECTION 6 : ACCIDENTAL RELEASE MEASURES

Use proper personal protective equipment as listed in section 8.
Absorb spill with dry inert material such as dry sand, earth, or vermiculite, then place in suitable container. Refer to section 13 for proper disposal.
Do not allow material to enter drains or streams.

SECTION 7 : HANDLING and STORAGE

Handling: This product should be handled only by, or under the close supervision of, those properly qualified in the handling and use of potentially hazardous chemicals, who should take into account the fire, health and chemical hazard data. It should always be handled in an efficient fume hood or equivalent system. The user should consider that the toxicological and physiological properties of many compounds are not yet well determined and that new hazardous products may arise from reactions between chemicals. Care should be taken to prevent any chemical from coming into contact with the skin or eyes and from contaminating personal clothing.
Storage: Store in a cool, dry, well ventilated area away from sources of heat and incompatible substances. Keep container tightly closed when not in use.
Hygiene Practices:Wash thoroughly after handling. Avoid contact with eyes and skin. Avoid inhaling vapor or mist.

SECTION 8 : EXPOSURE CONTROLS, PERSONAL PROTECTION

Use appropriate engineering control such as process enclosures, local exhaust ventilation, or other engineering controls to control airborne levels below recommended exposure limits. Where such systems are not effective wear suitable personal protective equipment, which performs satisfactorily and meets OSHA or other recognized standards. Consult with
local procedures for selection, training, inspection and maintenance of the personal protective equipment.

SECTION 9 : PHYSICAL and CHEMICAL PROPERTIES

Physical State/Appearance:Liquid
Color: Colorless

SECTION 10 : STABILITY and REACTIVITY

Conditions to Avoid:
Incompatibilities with Other
Materials:
Heat, flames and sparks.
Oxidizing agents.