2-Ethoxyethyl methacrylate supplier

Name
2-ETHOXYETHYL METHACRYLATE
EINECS 219-135-3
CAS No. 2370-63-0
Article Data6
CAS DataBase
Density 0.957 g/cm³
Solubility 17.05g/L at 20℃
Melting Point <25 °C
Formula C₈H₁₄O₃
Boiling Point 182.408 °C at 760 mmHg
Molecular Weight 158.197
Flash Point 71.667 °C
Transport Information
Appearance
Safety 26-27-36/37/39
Risk Codes 36/37/38
Molecular Structure
Hazard Symbols Xi
Synonyms Methacrylicacid, 2-ethoxyethyl ester (6CI,7CI,8CI);Ethanol, 2-ethoxy-, methacrylate(8CI);Acryester ET;Ethoxyethyl methacrylate;NSC24162;b-Ethoxyethyl methacrylate;
PSA 35.53000
LogP 1.14220

Synthetic route

: 110-80-5
2-ethoxy-ethanol

: 920-46-7
Methacryloyl chloride

: 2370-63-0
2-ethoxyethyl methacrylate

Conditions

Conditions	Yield
With pyridine In diethyl ether at 35℃; for 4h;	77%

: 75-86-5
2-hydroxy-2-methylpropanenitrile

: 2370-63-0
2-ethoxyethyl methacrylate

Conditions

Conditions	Yield
With sulfur trioxide; copper at 80 - 130℃; Zufuegen von Wasser, Kochen und folgendes Erhitzen des Reaktionsgemisches mit Aethylenglykol-monoaethylaether auf 100-110grad;

: 110-80-5
2-ethoxy-ethanol

: 80-62-6
methacrylic acid methyl ester

: 2370-63-0
2-ethoxyethyl methacrylate

Conditions

Conditions	Yield
With sulfuric acid
With sodium 2-ethoxyethoxide
With sodium 2-ethoxyethoxide

: 110-80-5
2-ethoxy-ethanol

: 463-49-0
1,2-propanediene

: 201230-82-2
carbon monoxide

: 2370-63-0
2-ethoxyethyl methacrylate

Conditions

Conditions	Yield
dodecacarbonyl-triangulo-triruthenium at 100℃; under 11400 Torr; for 3h;	80 % Chromat.

...Expand

: 17860-39-8
methyl 2-methoxy-2-methylpropanoate

: 2370-63-0
2-ethoxyethyl methacrylate

Conditions

Conditions	Yield
Multi-step reaction with 2 steps 1: anhydrous oxalic acid; hydroquinone 2: H2SO4 View Scheme

: 2370-63-0
2-ethoxyethyl methacrylate

: 92855-12-4
2-(naphthalen-1-yl)benzenamine

: 2-ethoxyethyl 2-((1-(2-aminophenyl)naphthalen-2-yl)methyl)acrylate

Conditions

Conditions	Yield
With disodium hydrogenphosphate; (S)-STRIP; palladium diacetate; silver sulfate In toluene at 60℃; for 48h; Schlenk technique; stereoselective reaction;	61%

: 2370-63-0
2-ethoxyethyl methacrylate

: 106-99-0
buta-1,3-diene

: (Z)-2-Non-8-enyl-undeca-2,10-dienoic acid 2-ethoxy-ethyl ester

Conditions

Conditions	Yield
With bis(acetylacetonate)nickel(II) In toluene

: 2370-63-0
2-ethoxyethyl methacrylate

: 106-99-0
buta-1,3-diene

: (2E,5E)-2-Methyl-undeca-2,5,10-trienoic acid 2-ethoxy-ethyl ester

Conditions

Conditions	Yield
With bis(acetylacetonate)nickel(II) In toluene

: 2370-63-0
2-ethoxyethyl methacrylate

: 97-90-5
EDMA

: 80-62-6
methacrylic acid methyl ester

polymers (I)-(x): polymers (I)-(x)

Conditions

Conditions	Yield
With potassium peroxomonosulphate; sodium dodecyl-sulfate In cyclohexane; water at 60 - 70℃; for 3.5h; Product distribution; different ratios of monomers and solvent;

...Expand

: 2,6-diphenyl-4-[4-(2-methylacryloyloxy)-phenyl]-pyrylium tetrafluoroborate

: 2370-63-0
2-ethoxyethyl methacrylate

polymer, radical copolymerization; monomer(s): 4-[4-(2-methyl-acryloyloxy)-phenyl]-2,6-diphenyl-pyranylium tetrafluoroborate; 2-ethoxyethyl methacrylate, molar ratio 0.5:100: polymer, radical copolymerization; monomer(s): 4-[4-(2-methyl-acryloyloxy)-phenyl]-2,6-diphenyl-pyranylium tetrafluoroborate; 2-ethoxyethyl methacrylate, molar ratio 0.5:100

Conditions

Conditions	Yield
With 2,2'-azobis(isobutyronitrile); EDMA at 65℃; for 5h;

: 2,6-diphenyl-4-[4-(2-methylacryloyloxy)-phenyl]-pyrylium tetrafluoroborate

: 2370-63-0
2-ethoxyethyl methacrylate

polymer, radical copolymerization; monomer(s): 4-[4-(2-methyl-acryloyloxy)-phenyl]-2,6-diphenyl-pyranylium tetrafluoroborate; 2-ethoxyethyl methacrylate, molar ratio 1.0:100: polymer, radical copolymerization; monomer(s): 4-[4-(2-methyl-acryloyloxy)-phenyl]-2,6-diphenyl-pyranylium tetrafluoroborate; 2-ethoxyethyl methacrylate, molar ratio 1.0:100

Conditions

Conditions	Yield
With 2,2'-azobis(isobutyronitrile); EDMA at 65℃; for 5h;

: 2,6-diphenyl-4-[4-(2-methylacryloyloxy)-phenyl]-pyrylium tetrafluoroborate

: 2370-63-0
2-ethoxyethyl methacrylate

polymer, radical copolymerization; monomer(s): 4-[4-(2-methyl-acryloyloxy)-phenyl]-2,6-diphenyl-pyranylium tetrafluoroborate; 2-ethoxyethyl methacrylate, molar ratio 2.0:100: polymer, radical copolymerization; monomer(s): 4-[4-(2-methyl-acryloyloxy)-phenyl]-2,6-diphenyl-pyranylium tetrafluoroborate; 2-ethoxyethyl methacrylate, molar ratio 2.0:100

Conditions

Conditions	Yield
With 2,2'-azobis(isobutyronitrile); EDMA at 65℃; for 5h;

: 2,6-diphenyl-4-[4-(2-methylacryloyloxy)-phenyl]-pyrylium tetrafluoroborate

: 2370-63-0
2-ethoxyethyl methacrylate

: 5919-74-4
2,3-dihydroxypropyl methacrylate

polymer, radical copolymerization; monomer(s): 4-[4-(2-methyl-acryloyloxy)-phenyl]-2,6-diphenyl-pyranylium tetrafluoroborate; 2-ethoxyethyl methacrylate; 2,3-dihydroxypropyl methacrylate, molar ratio 0.5:75:25: polymer, radical copolymerization; monomer(s): 4-[4-(2-methyl-acryloyloxy)-phenyl]-2,6-diphenyl-pyranylium tetrafluoroborate; 2-ethoxyethyl methacrylate; 2,3-dihydroxypropyl methacrylate, molar ratio 0.5:75:25

Conditions

Conditions	Yield
With 2,2'-azobis(isobutyronitrile); EDMA at 65℃; for 5h;

...Expand

: 2,6-diphenyl-4-[4-(2-methylacryloyloxy)-phenyl]-pyrylium tetrafluoroborate

: 2370-63-0
2-ethoxyethyl methacrylate

: 5919-74-4
2,3-dihydroxypropyl methacrylate

polymer, radical copolymerization; monomer(s): 4-[4-(2-methyl-acryloyloxy)-phenyl]-2,6-diphenyl-pyranylium tetrafluoroborate; 2-ethoxyethyl methacrylate; 2,3-dihydroxypropyl methacrylate, molar ratio 1.0:75:25: polymer, radical copolymerization; monomer(s): 4-[4-(2-methyl-acryloyloxy)-phenyl]-2,6-diphenyl-pyranylium tetrafluoroborate; 2-ethoxyethyl methacrylate; 2,3-dihydroxypropyl methacrylate, molar ratio 1.0:75:25

Conditions

Conditions	Yield
With 2,2'-azobis(isobutyronitrile); EDMA at 65℃; for 5h;

...Expand

: 2,6-diphenyl-4-[4-(2-methylacryloyloxy)-phenyl]-pyrylium tetrafluoroborate

: 2370-63-0
2-ethoxyethyl methacrylate

: 5919-74-4
2,3-dihydroxypropyl methacrylate

polymer, radical copolymerization; monomer(s): 4-[4-(2-methyl-acryloyloxy)-phenyl]-2,6-diphenyl-pyranylium tetrafluoroborate; 2-ethoxyethyl methacrylate; 2,3-dihydroxypropyl methacrylate, molar ratio 2.0:75:25: polymer, radical copolymerization; monomer(s): 4-[4-(2-methyl-acryloyloxy)-phenyl]-2,6-diphenyl-pyranylium tetrafluoroborate; 2-ethoxyethyl methacrylate; 2,3-dihydroxypropyl methacrylate, molar ratio 2.0:75:25

Conditions

Conditions	Yield
With 2,2'-azobis(isobutyronitrile); EDMA at 65℃; for 5h;

...Expand

: 2,6-diphenyl-4-[4-(2-methylacryloyloxy)-phenyl]-pyrylium tetrafluoroborate

: 2370-63-0
2-ethoxyethyl methacrylate

: 5919-74-4
2,3-dihydroxypropyl methacrylate

polymer, radical copolymerization; monomer(s): 4-[4-(2-methyl-acryloyloxy)-phenyl]-2,6-diphenyl-pyranylium tetrafluoroborate; 2-ethoxyethyl methacrylate; 2,3-dihydroxypropyl methacrylate, molar ratio 0.5:50:50: polymer, radical copolymerization; monomer(s): 4-[4-(2-methyl-acryloyloxy)-phenyl]-2,6-diphenyl-pyranylium tetrafluoroborate; 2-ethoxyethyl methacrylate; 2,3-dihydroxypropyl methacrylate, molar ratio 0.5:50:50

Conditions

Conditions	Yield
With 2,2'-azobis(isobutyronitrile); EDMA at 65℃; for 5h;

...Expand

: 2,6-diphenyl-4-[4-(2-methylacryloyloxy)-phenyl]-pyrylium tetrafluoroborate

: 2370-63-0
2-ethoxyethyl methacrylate

: 5919-74-4
2,3-dihydroxypropyl methacrylate

polymer, radical copolymerization; monomer(s): 4-[4-(2-methyl-acryloyloxy)-phenyl]-2,6-diphenyl-pyranylium tetrafluoroborate; 2-ethoxyethyl methacrylate; 2,3-dihydroxypropyl methacrylate, molar ratio 1.0:50;50: polymer, radical copolymerization; monomer(s): 4-[4-(2-methyl-acryloyloxy)-phenyl]-2,6-diphenyl-pyranylium tetrafluoroborate; 2-ethoxyethyl methacrylate; 2,3-dihydroxypropyl methacrylate, molar ratio 1.0:50;50

Conditions

Conditions	Yield
With 2,2'-azobis(isobutyronitrile); EDMA at 65℃; for 5h;

...Expand

: 2,6-diphenyl-4-[4-(2-methylacryloyloxy)-phenyl]-pyrylium tetrafluoroborate

: 2370-63-0
2-ethoxyethyl methacrylate

: 5919-74-4
2,3-dihydroxypropyl methacrylate

polymer, radical copolymerization; monomer(s): 4-[4-(2-methyl-acryloyloxy)-phenyl]-2,6-diphenyl-pyranylium tetrafluoroborate; 2-ethoxyethyl methacrylate; 2,3-dihydroxypropyl methacrylate, molar ratio 2.0:50:50: polymer, radical copolymerization; monomer(s): 4-[4-(2-methyl-acryloyloxy)-phenyl]-2,6-diphenyl-pyranylium tetrafluoroborate; 2-ethoxyethyl methacrylate; 2,3-dihydroxypropyl methacrylate, molar ratio 2.0:50:50

Conditions

Conditions	Yield
With 2,2'-azobis(isobutyronitrile); EDMA at 65℃; for 5h;

...Expand

: 5238-56-2
N-(2-hydroxyethyl)methacrylamide

: 2370-63-0
2-ethoxyethyl methacrylate

: 97-90-5
EDMA

polymer; monomer(s): 2-ethoxyethyl methacrylate, 90 mol percent; 1,2-ethanediol dimethacrylate; 2-hydroxyethyl methacrylamide: polymer; monomer(s): 2-ethoxyethyl methacrylate, 90 mol percent; 1,2-ethanediol dimethacrylate; 2-hydroxyethyl methacrylamide

Conditions

Conditions	Yield
With 2,2'-azobis(isobutyronitrile) at 70℃; for 5h;

...Expand

: 5238-56-2
N-(2-hydroxyethyl)methacrylamide

: 2370-63-0
2-ethoxyethyl methacrylate

: 97-90-5
EDMA

polymer; monomer(s): 2-ethoxyethyl methacrylate, 80 mol percent; 1,2-ethanediol dimethacrylate; 2-hydroxyethyl methacrylamide: polymer; monomer(s): 2-ethoxyethyl methacrylate, 80 mol percent; 1,2-ethanediol dimethacrylate; 2-hydroxyethyl methacrylamide

Conditions

Conditions	Yield
With 2,2'-azobis(isobutyronitrile) at 70℃; for 5h;

...Expand

: 5238-56-2
N-(2-hydroxyethyl)methacrylamide

: 2370-63-0
2-ethoxyethyl methacrylate

: 97-90-5
EDMA

polymer; monomer(s): 2-ethoxyethyl methacrylate, 70 mol percent; 1,2-ethanediol dimethacrylate; 2-hydroxyethyl methacrylamide: polymer; monomer(s): 2-ethoxyethyl methacrylate, 70 mol percent; 1,2-ethanediol dimethacrylate; 2-hydroxyethyl methacrylamide

Conditions

Conditions	Yield
With 2,2'-azobis(isobutyronitrile) at 70℃; for 5h;

...Expand

: 5238-56-2
N-(2-hydroxyethyl)methacrylamide

: 2370-63-0
2-ethoxyethyl methacrylate

: 97-90-5
EDMA

polymer; monomer(s): 2-ethoxyethyl methacrylate, 60 mol percent; 1,2-ethanediol dimethacrylate; 2-hydroxyethyl methacrylamide: polymer; monomer(s): 2-ethoxyethyl methacrylate, 60 mol percent; 1,2-ethanediol dimethacrylate; 2-hydroxyethyl methacrylamide

Conditions

Conditions	Yield
With 2,2'-azobis(isobutyronitrile) at 70℃; for 5h;

...Expand

: 5238-56-2
N-(2-hydroxyethyl)methacrylamide

: 2370-63-0
2-ethoxyethyl methacrylate

: 97-90-5
EDMA

polymer; monomer(s): 2-ethoxyethyl methacrylate, 50 mol percent; 1,2-ethanediol dimethacrylate; 2-hydroxyethyl methacrylamide: polymer; monomer(s): 2-ethoxyethyl methacrylate, 50 mol percent; 1,2-ethanediol dimethacrylate; 2-hydroxyethyl methacrylamide

Conditions

Conditions	Yield
With 2,2'-azobis(isobutyronitrile) at 70℃; for 5h;

...Expand

: 2370-63-0
2-ethoxyethyl methacrylate

: 97-90-5
EDMA

polymer; monomer(s): 2-ethoxyethyl methacrylate; 1,2-ethanediol dimethacrylate: polymer; monomer(s): 2-ethoxyethyl methacrylate; 1,2-ethanediol dimethacrylate

Conditions

Conditions	Yield
With 2,2'-azobis(isobutyronitrile) at 70℃; for 5h;

: 2370-63-0
2-ethoxyethyl methacrylate

polymer; monomer(s): 2-ethoxyethyl methacrylate: polymer; monomer(s): 2-ethoxyethyl methacrylate

Conditions

Conditions	Yield
With 2,2-dimethoxy-2-phenylacetophenone at 25℃; UV-irradiation;

: 2,6-diphenyl-4-[4-(2-methylacryloyloxy)-phenyl]-pyrylium tetrafluoroborate

: 2370-63-0
2-ethoxyethyl methacrylate

: 97-90-5
EDMA

: 5919-74-4
2,3-dihydroxypropyl methacrylate

polymer, product of radical copolymerization; monomer(s): 2,6-diphenyl-4-[4-(2-methylacryloyloxy)-phenyl]-pyrylium tetrafluoroborate; 2-ethoxyethyl methacrylate; 2,3-dihydroxypropyl methacrylate; ethyleneglycol dimethacrylate: polymer, product of radical copolymerization; monomer(s): 2,6-diphenyl-4-[4-(2-methylacryloyloxy)-phenyl]-pyrylium tetrafluoroborate; 2-ethoxyethyl methacrylate; 2,3-dihydroxypropyl methacrylate; ethyleneglycol dimethacrylate

Conditions

Conditions	Yield
With 2,2'-azobis(isobutyronitrile)

...Expand

: 2,6-bis(4-methylphenyl)-4-[4-(2-methylacryloyloxy)-phenyl]-pyrylium tetrafluoroborate

: 2370-63-0
2-ethoxyethyl methacrylate

: 97-90-5
EDMA

: 5919-74-4
2,3-dihydroxypropyl methacrylate

polymer, product of radical copolymerization; monomer(s): 2,6-bis(4-methylphenyl)-4-[4-(2-methylacryloyloxy)-phenyl]-pyrylium tetrafluoroborate; 2-ethoxyethyl methacrylate; 2,3-dihydroxypropyl methacrylate; ethyleneglycol dimethacrylate: polymer, product of radical copolymerization; monomer(s): 2,6-bis(4-methylphenyl)-4-[4-(2-methylacryloyloxy)-phenyl]-pyrylium tetrafluoroborate; 2-ethoxyethyl methacrylate; 2,3-dihydroxypropyl methacrylate; ethyleneglycol dimethacrylate

Conditions

Conditions	Yield
With 2,2'-azobis(isobutyronitrile)

...Expand

: 2,6-bis(4-methoxyphenyl)-4-[4-(2-methylacryloyloxy)-phenyl]-pyrylium tetrafluoroborate

: 2370-63-0
2-ethoxyethyl methacrylate

: 97-90-5
EDMA

: 5919-74-4
2,3-dihydroxypropyl methacrylate

polymer; monomer(s): 2,6-bis(4-metoxyphenyl)-4-[4-(2-methylacryloyloxy)-phenyl]-pyrylium tetrafluoroborate; 2-ethoxyethyl methacrylate; 2,3-dihydroxypropyl methacrylate; ethyleneglycol dimethacrylate: polymer; monomer(s): 2,6-bis(4-metoxyphenyl)-4-[4-(2-methylacryloyloxy)-phenyl]-pyrylium tetrafluoroborate; 2-ethoxyethyl methacrylate; 2,3-dihydroxypropyl methacrylate; ethyleneglycol dimethacrylate

Conditions

Conditions	Yield
With 2,2'-azobis(isobutyronitrile)

...Expand

2-Ethoxyethyl methacrylate Specification

The 2-Ethoxyethyl methacrylate with cas registry number of 2370-63-0, belongs to the following product categories: (1)Acrylic Monomers; (2)C8 to C9Monomers; (3)Carbonyl Compounds; (4)Esters; (5)Methacrylate. Its systematic name and IUPAC name are the same, which is 2-ethoxyethyl 2-methylprop-2-enoate.

Physical properties about this chemical are: (1)ACD/LogP: 1.57; (2)# of Rule of 5 Violations: 0; (3)ACD/LogD (pH 5.5): 1.57; (4)ACD/LogD (pH 7.4): 1.57; (5)ACD/BCF (pH 5.5): 9.25; (6)ACD/BCF (pH 7.4): 9.25; (7)ACD/KOC (pH 5.5): 171.01; (8)ACD/KOC (pH 7.4): 171.01; (9)#H bond acceptors: 3; (10)#H bond donors: 0; (11)#Freely Rotating Bonds: 6; (12)Polar Surface Area: 35.53 Å²; (13)Index of Refraction: 1.424; (14)Molar Refractivity: 42.19 cm³; (15)Molar Volume: 165.3 cm³; (16)Polarizability: 16.72×10^-24cm³; (17)Surface Tension: 27.9 dyne/cm; (18)Enthalpy of Vaporization: 41.87 kJ/mol; (19)Vapour Pressure: 0.812 mmHg at 25°C.

When you are using this chemical, please be cautious about it as the following:
The 2-Ethoxyethyl methacrylate irritates to eyes, respiratory system and skin. When use it, wear suitable protective clothing, gloves and eye/face protection. If contact with eyes, rinse immediately with plenty of water and seek medical advice. After use it, take off immediately all contaminated clothing.

You can still convert the following datas into molecular structure:
(1)SMILES: O=C(OCCOCC)\C(=C)C;
(2)InChI: InChI=1/C8H14O3/c1-4-10-5-6-11-8(9)7(2)3/h2,4-6H2,1,3H3;
(3)InChIKey: SFPNZPQIIAJXGL-UHFFFAOYAD;
(4)Std. InChI: InChI=1S/C8H14O3/c1-4-10-5-6-11-8(9)7(2)3/h2,4-6H2,1,3H3;
(5)Std. InChIKey: SFPNZPQIIAJXGL-UHFFFAOYSA-N

Product Name

2-ETHOXYETHYL METHACRYLATE

Synthetic route

2-Ethoxyethyl methacrylate Specification

Related Products

Hot Products