Linseed oil supplier | CasNO.8001-26-1

Name
Linseed oil
EINECS 232-278-6
CAS No. 8001-26-1
Density 0.93 g/mL at 25 °C(lit.)
Solubility
Melting Point -24.0℃
Formula Unspecified
Boiling Point >316 °C
Molecular Weight 0
Flash Point >230 °F
Transport Information
Appearance
Safety 26-36
Risk Codes 20/21/22-36/37/38-43
Molecular Structure
Hazard Symbols R10:Flammable.; R38:Irritating to skin.; R43:May cause sensitization by skin contact.; R50/53:Very toxic to
Synonyms Purolin2;Scan-Oil;Toenol 1140;Diggers;Eruboiruyu;Fats and Glyceridic oils, flaxseed;Fats and Glyceridic oils,linseed;Flax oil;Flaxseed oil;GP 1125;Hakujun'ama 6;Hakujun'ama 7;Linseedoil, bleached;Oils, glyceridic, flaxseed or linseed;P 1037;Purolin;
PSA 0.00000
LogP 0.00000

Linseed oil Consensus Reports

Reported in EPA TSCA Inventory.

Linseed oil Specification

The Linseed oil, also known as Oils, linseed, is the organic compound with CAS registry number 8001-26-1. This chemical belongs to the product categories of Oils Polymer Science; Biochemicals and Reagents; Engineering Polymers; Lipids; Waxes and Oils. Its EINECS registry number is 232-278-6. This chemical's classification codes are Natural Product; Skin / Eye Irritant; TSCA UVCB. Linseed oil is a clear to yellowish oil.

Linseed oil, also known as flax seed oil, is obtained from the dried ripe seeds of the flax plant (Linum usitatissimum, Linaceae). The oil is obtained by cold pressing, sometimes followed by solvent extraction.

Due to its polymer-forming properties, linseed oil is used on its own or blended with other oils, resins, and solvents as an impregnator and varnish in wood finishing, as a pigment binder in oil paints, as a plasticizer and hardener in putty and in the manufacture of linoleum. Linseed oil is a common carrier used in oil paint. It can also be used as a painting medium, making oil paints more fluid, transparent and glossy. When used as a wood finish, linseed oil dries slowly and shrinks little upon hardening. Linseed oil is used to bind wood dust, cork particles, and related materials in the manufacture of the floor covering linoleum. Linseed oil is used to coat cricket bats so that the wood will retain some moisture.

When you are using this chemical, please be cautious about it as the following:
This chemical may cause damage to health. It is harmful by inhalation, in contact with skin and if swallowed. It is irritating to eyes, respiratory system and skin. In case of contact with eyes, you should rinse immediately with plenty of water and seek medical advice. Whenever you will contact it, please wear suitable protective clothing.

Product Name

Linseed oil

Linseed oil Consensus Reports

Linseed oil Specification

Related Products

Hot Products