nickel(II) carbonate
water
acetic acid
nickel(II) acetate tetrahydrate
Conditions | Yield |
---|---|
In water recrystalization (D2O); |
Conditions | Yield |
---|---|
In acetic acid | |
In acetic acid aq. acetic acid; |
Conditions | Yield |
---|---|
In water Electrolysis; | |
In water Electrolysis; |
Conditions | Yield |
---|---|
In acetic acid aq. acetic acid; |
Conditions | Yield |
---|---|
With oxygen In acetic acid heating while passing O2 over a suspension of Ni and NiBr2 in 40% acetic acid at 100°C for more than 3.5 h;; | |
In acetic acid dissolving in concd. acetic acid, heating;; | |
With O2; Ni bromide In acetic acid aq. acetic acid; heating while passing O2 over a suspension of Ni and NiBr2 in 40% acetic acid at 100°C for more than 3.5 h;; | |
In acetic acid aq. acetic acid; dissolving in concd. acetic acid, heating;; | |
In acetic acid dissolving in concd. acetic acid, heating;; |
Conditions | Yield |
---|---|
In acetic acid in autoclave at 120°C;; | |
In acetic acid aq. acetic acid; in autoclave at 120°C;; | |
In acetic acid in autoclave at 120°C;; |
Conditions | Yield |
---|---|
In acetic acid in autoclave at 120°C;; | |
In acetic acid aq. acetic acid; in autoclave at 120°C;; | |
In acetic acid in autoclave at 120°C;; |
Conditions | Yield |
---|---|
In water | |
In water |
Conditions | Yield |
---|---|
With water In water | |
With H2O In water |
5,10,15,20-tetraphenyl-21H,23H-porphine
nickel(II) acetate tetrahydrate
5,10,15,20-tetraphenylporphinatonickel(II)
Conditions | Yield |
---|---|
In pyridine other Radiation; porphyrin, metal salt and pyridine were sealed in a glass tube, microwave power of 300 W, heated from room temp. to 180°C, stirred for 15min, cooled to 50°C; vessel was opened, decanted, TLC (silica gel), UV; | 100% |
In methanol; chloroform tetraphenylporphyrin (300 mg) and Ni(OAc)2*4H2O (1 g) refluxed (16 h) inCHCl3/MeOH (2:1); cooled; solvent removed (vac.); dissolved in CHCl3; chromd. (silica, CHCl3); | 99% |
Mo(CO)5((C6H5)2PNHCH2CH2NCHC6H4OH)
nickel(II) acetate tetrahydrate
Conditions | Yield |
---|---|
In tetrahydrofuran A mixt. of Ni(OAc)2*4H2O and Mo(CO)5(Ph2PNHCH2CH2NCHC6H4OH) in THF was stirred under Ar at ambient temp. for 42 h.; The mixt. was filtered and then the filtrate evapd. to dryness to yield {Mo(CO)5(Ph2PNHCH2CH2NCHC6H4O)}2Ni.; | 100% |
nickel(II) acetate tetrahydrate
2,6-bis<2'-(4'-methylthio)-6'-(2''-pyridinyl)pyridinyl>pyridine
Conditions | Yield |
---|---|
In methanol addn of 4.17E-4 mol quinquepyridine to a soln. of 4.17E-4 mol Ni(OOCCH3)2*4H2O in methanol; stirring for 3 h at room temperature; treating with a satd. methanolic soln. of NH4PF6; filtration;; washing with methanol; recrystallization from nitromethane/diethyl ether; elem. anal.;; | 100% |
nickel(II) acetate tetrahydrate
Conditions | Yield |
---|---|
In methanol; chloroform mixt. of Pt complex and Ni salt in CHCl3/MeOH (5:3) refluxed for 15 h; poured into H2O, extd. with CHCl3, washed with brine, dried and evapd.,column chromy. on SiO2; recrystn. from CHCl3-MeOH; elem. anal.; | 100% |
nickel(II) acetate tetrahydrate
meso-tetraphenyl-2-oxa-3-oxoporphyrinatonickel(II)
Conditions | Yield |
---|---|
In pyridine other Radiation; 3 equiv of Ni-salt, porphyrin, pyridine were sealed in glass tube, stirred under microwave power of 300 W, hetaed from room temp. to 180°C for 15 min; cooled to 50°C, removed from the microwave cavity, opened, decanted, preparative chromy. (petroleum ether-CH2Cl2); | 100% |
nickel(II) acetate tetrahydrate
[5(4'-iodophenyl)tetrakis-10,15,20-tris(3'',5''-di-tert-butylphenyl)porphyrinato]nickel(II)
Conditions | Yield |
---|---|
In N,N-dimethyl-formamide refluxed for 40 min; cooled, ether added, washed (water), dried (Na2SO4), filtered,solvent removed, chromy. (silica, dichloromethane/light petroleum), solvent removed, recrystd. (CH2Cl2/CH3OH); elem. anal.; | 100% |
nickel(II) acetate tetrahydrate
1,4-bis[3-(4-chlorophenyl)-4,6-dimethoxyindol-7-ylmethyleneamino]benzene
(1,4-bis[3-(4-chlorophenyl)-4,6-dimethoxyindol-7-ylmethyleneamino]benzenato(2-))nickel(II)
Conditions | Yield |
---|---|
With Et3N In acetonitrile ligand was dissolved at reflux, anhyd. Et3N and the metal salt were added, mixt. was heated at reflux for 8 h; mixt. was filtered warm, ppt. was washed with MeCN followed by anhyd. Et2O, dried in air; | 100% |
nickel(II) acetate tetrahydrate
Conditions | Yield |
---|---|
With acetic acid In chloroform | 100% |
Conditions | Yield |
---|---|
In methanol for 13h; Reflux; | 100% |
Conditions | Yield |
---|---|
With sodium hydroxide In ethanol; water at 20 - 110℃; for 72h; pH=7; Autoclave; High pressure; | 100% |
Conditions | Yield |
---|---|
In methanol; chloroform at 60℃; for 264h; Inert atmosphere; | 100% |
Conditions | Yield |
---|---|
In toluene at 120℃; for 5h; Inert atmosphere; | 100% |
nickel(II) acetate tetrahydrate
Conditions | Yield |
---|---|
In methanol; chloroform addn. of Ni-salt soln. (in MeOH) to equimolar amt. of ligand soln. (in CHCl3/MeOH=2:1), stirring for 15 min; pptn. on standing (room temp., 24 h), recrystn. (MeCN/MeOH=1:1); elem. anal.; | 99.8% |
In methanol; chloroform stoichiometric amts., ratio CH3OH:CHCl3 1:1, pptn. in several h; recrystn. (CH3CN); elem. anal.; |
N-(2-hydroxyl-3,5-di-tert-butylbenzaldehyde)-1-amino-2-benzeneimine
nickel(II) acetate tetrahydrate
2-hydroxy-5-(4,4,5,5-tetramethyl-1,3,2-dioxaborolan-2-yl)benzaldehyde
Conditions | Yield |
---|---|
Stage #1: N-(2-hydroxyl-3,5-di-tert-butylbenzaldehyde)-1-amino-2-benzeneimine; nickel(II) acetate tetrahydrate With triethylamine In methanol for 0.0833333h; Stage #2: 2-hydroxy-5-(4,4,5,5-tetramethyl-1,3,2-dioxaborolan-2-yl)benzaldehyde In tetrahydrofuran | 99.8% |
nickel(II) acetate tetrahydrate
(2-bromo-5,10,15,20-tetraphenylporphyrinato)nickel(II)
Conditions | Yield |
---|---|
In methanol; chloroform β-tetraphenylporphyrin (240 mg) and Ni(OAc)2*4H2O (800 mg) refluxed(16 h) in CHCl3/MeOH (2:1); cooled; solvent removed (vac.); dissolved in CHCl3; chromd. (silica, CHCl3); | 99% |
malonaldehydebis(dimethylacetal)
nickel(II) acetate tetrahydrate
4,5-dimethyl-1,2-phenylenediamine
{7,16-dihydro-2,3,11,12-tetramethyldibenzo{b,i}{1,4,8,11}tetraazacyclotetradecinato-N5,N9,N14,N18}nickel(II)
Conditions | Yield |
---|---|
In water; N,N-dimethyl-formamide reflux for 10 h; filtn., chromy.; elem. anal.;; | 99% |
nickel(II) acetate tetrahydrate
Conditions | Yield |
---|---|
In methanol; acetone byproducts: H2O; inert atmosphere; dropwise addn. of metal acetate (in MeOH) to 0.5 equiv. Mn-complex (in Me2CO), stirring for 1 h; solvent removal (vac.), dissoln. in THF/CH2Cl2=10:1, pptn. on Et2O addn., standing overnight; | 99% |
nickel(II) acetate tetrahydrate
Conditions | Yield |
---|---|
In methanol; acetone byproducts: H2O; inert atmosphere; dropwise addn. of metal acetate (in MeOH) to 0.5 equiv. Mn-complex (in Me2CO), stirring for 1 h; solvent removal (vac.), dissoln. in PhMe, pptn. on addn. of hexanes, standing overnight; | 99% |
nickel(II) acetate tetrahydrate
Conditions | Yield |
---|---|
In methanol; chloroform; water addn. of excess Ni-salt (in MeOH/water=5:1 v/v) to refluxing soln. of porphyrin in CHCl3, refluxing for 16 h; washing (water), drying (MgSO4), solvent removal (reduced pressure), recrystn. (CH2Cl2/MeOH); | 99% |
nickel(II) acetate tetrahydrate
Conditions | Yield |
---|---|
In dimethyl sulfoxide (Schlenk, dry N2) a soln. of bromide and Ni-compound in DMSO was heated at 50°C for 3 h, then at 110°C for 2 h; the solvent was removed under vac., the residue was washed with THF, filtered, dried under vac.; elem. anal.; | 99% |
nickel(II) acetate tetrahydrate
[5,10,15,20-tetrakis(3,5-di-tert-butylphenyl)bisquinoxalino[2,3-b':7,8-b'']porphyrinato]nickel(II)
Conditions | Yield |
---|---|
In acetic acid; toluene porphyrin and metal salt (1:4) dissolved in toluene and glacial acetic acid, refluxed for 1 min; treated with CH2Cl2, org. phase separated, washed (H2O, Na2CO3 soln., H2O), dried (Na2SO4), filtered, evapd., chromy.(silica gel - light petroleun 1:3), collected, evapd., elem. anal.; | 99% |
dimethyl 2,2'-dihydroxy-1,1'-binaphthalene-3,3'-dicarboxylate
nickel(II) acetate tetrahydrate
Conditions | Yield |
---|---|
With sodium acetate In methanol; pentan-1-ol heating of MeOH soln. of Ni(CH3COO)2*4H2O on water bath; addn. of 2,2'-dihydroxy-2,2'-di(carboxymethyl)-1,1'-binaphthyl in pentanol; adjusting pH to 5.0 by addn. of NaCH3COO; reflux on water bath for 3 h; pptn. upon heating, filtration, washing with EtOH; drying in desiccator over silica gel; elem. anal.; | 99% |
(C5H3N(NCHC6H2(O)(tBu)2)2)Zn
nickel(II) acetate tetrahydrate
[(tetra(p-tolyl)porphyrinato)Zn(NC5H3(NCHC6H2(C(CH3)3)2O)2)Ni]
Conditions | Yield |
---|---|
In tetrahydrofuran stirred at room temp. for 18 h; concd. (vac.), triturated with n-hexane; | 99% |
[Zn2((C6H3(NCHC6H2(O)(OCH3)CH2CHCH2)NCHC6H2(C(CH3)3)2O)2)]
nickel(II) acetate tetrahydrate
[Ni2((C6H3(NCHC6H2(O)(OCH3)CH2CHCH2)NCHC6H2(C(CH3)3)2O)2)]
Conditions | Yield |
---|---|
In methanol; dichloromethane a MeOH soln. of Ni salt added to a suspn. of Zn complex in CH2Cl2; concd., the residue suspended in MeOH, filtered off, washed (MeOH), dried in air; | 99% |
15,15-difluoro-1,4,7,10,13-pentaazacyclohexadecane-14,16-dione
nickel(II) acetate tetrahydrate
[Ni(OAc)2(15,15-difluoro-1,4,7,10,13-pentaazacyclohexadecane-14,16-dione)]
Conditions | Yield |
---|---|
In ethanol N2; ligand and Co compd. (1:1 molar ratio) refluxed for 3 h; filtered, evapd., elem. anal.; | 99% |
Conditions | Yield |
---|---|
In N,N-dimethyl-formamide at 155℃; for 3h; Inert atmosphere; | 99% |
nickel(II) acetate tetrahydrate
Conditions | Yield |
---|---|
In N,N-dimethyl-formamide at 140℃; for 5h; | 99% |
The Nickel acetate tetrahydrate, with the CAS registry number 6018-89-9 and EINECS registry number 206-761-7, has the systematic name of nickel(2+) acetate hydrate (1:2:4). It is a kind of hygroscopic green monoclinic crystal. And the molecular formula of this chemical is C4H16NiO8. What's more, it is usually used as chemical reagent, and it is also used as catalyst in the nickelage and coloration of metal and nickelage.
The physical properties of Nickel acetate tetrahydrate are as followings: (1)ACD/LogP: -0.29; (2)# of Rule of 5 Violations: 0; (3)ACD/LogD (pH 5.5): -1.07; (4)ACD/LogD (pH 7.4): -2.86; (5)ACD/BCF (pH 5.5): 1; (6)ACD/BCF (pH 7.4): 1; (7)ACD/KOC (pH 5.5): 2.73; (8)ACD/KOC (pH 7.4): 1; (9)#H bond acceptors: 2; (10)#H bond donors: 1; (11)#Freely Rotating Bonds: 0; (12)Polar Surface Area: 37.3 Å2; (13)Flash Point: 40 °C; (14)Enthalpy of Vaporization: 23.7 kJ/mol; (15)Boiling Point: 117.1 °C at 760 mmHg; (16)Vapour Pressure: 13.9 mmHg at 25°C.
Preparation: Dissolve the basic nickel carbonate in excessive dilute acetic acid. Then, after a series of filtration, evaporation, cooling crystallization and drying, you can get product.
You should be cautious while dealing with this chemical. It is harmful if swallowed, and may cause sensitization by skin contact. What's more, it may cause cancer. Therefore, you had better take the following instructions: Do not breathe dust; Avoid contact with skin ; Avoid exposure - obtain special instruction before use; Wear suitable protective clothing and gloves, and in case of accident or if you feel unwell, seek medical advice immediately (show label where possible).
You can still convert the following datas into molecular structure:
(1)SMILES: [Ni+2].[O-]C(=O)C.[O-]C(=O)C.O.O.O.O
(2)InChI: InChI=1/2C2H4O2.Ni.4H2O/c2*1-2(3)4;;;;;/h2*1H3,(H,3,4);;4*1H2/q;;+2;;;;/p-2
(3)InChIKey: OINIXPNQKAZCRL-NUQVWONBAQ
The toxicity data is as follows:
Organism | Test Type | Route | Reported Dose (Normalized Dose) | Effect | Source |
---|---|---|---|---|---|
mouse | LD50 | intraperitoneal | 45700ug/kg (45.7mg/kg) | Research Communications in Chemical Pathology and Pharmacology. Vol. 30, Pg. 133, 1980. | |
mouse | LD50 | oral | 410mg/kg (410mg/kg) | Gekkan Yakuji. Pharmaceuticals Monthly. Vol. 22, Pg. 455, 1980. | |
rat | LD50 | oral | 350mg/kg (350mg/kg) | Gekkan Yakuji. Pharmaceuticals Monthly. Vol. 22, Pg. 455, 1980. |
About|Contact|Cas|Product Name|Molecular|Country|Encyclopedia
Message|New Cas|MSDS|Service|Advertisement|CAS DataBase|Article Data|Manufacturers | Chemical Catalog
©2008 LookChem.com,License: ICP
NO.:Zhejiang16009103
complaints:service@lookchem.com Desktop View